Optical 2.
SYSTEM REQUIREMENTS: Please be sure that you meet all of the system requirements below to avoid difficulties during installation - PC & Mac® Compatibles - Windows® 2000, XP, Vista and 7 - Mac® OS 10.3 or Above - Available USB Port SPECIFICATIONS: Your new Wireless Optical Mouse complies with the following specifications. - USB Interface FCC WARNING This device complies with Part 15 of the FCC Rules.
INSTALLING BATTERIES: To properly install batteries into your Mouse, please follow the instructions below: 1. Pull the Battery Compartment Release Latch at the bottom of your Mouse and remove the Battery Compartment Cover from your Mouse. Note: Remove the Battery Compartment Cover from your Mouse gently, otherwise the Nano Receiver stowed inside the battery bay will pop out. Nano Receiver 2.
INSTALLATION: For All Operating Systems 1. Make sure you have successfully installed the Batteries into your Mouse, refer to the Installing Batteries section in this manual if necessary. 2. Turn on your computer, plug the enclosed Nano Receiver into an available USB port on your computer. (TIP: If you are not able to find an available USB port on your computer, please refer to the user’s manual of your computer for more detail. 3. Your wireless optical mouse is now ready to be used.
CHANGING THE SPEED OF YOUR MOUSE: To adjust the speed of the cursor or the scroll button features on your computer, please follow the instructions below: NOTE: The screenshots show in this section are for demonstration only and your screen may look slightly different but with similar options. For Windows® Open the “Control Panel”, and double-click the “Mouse” icon to open the mouse properties screen, and then select the “Pointer Options”. After you have made your changes; select “Apply”, and then “OK”.