Installation Instructions

Dance Blanket Manual
Model: JP-12-3-1
2.4g blanket control unit
The control circuit of the 2.4G blanket motherboard consists of 1 MCU
(integrated the function of the single -chip microcomputer and the 2.4G
generalization function).
2.4G blanket control unit work principle:
1. When the 2.4G blanket control unit was installed with 2 dry batteries
(No. 7), the MCU started working. The MCU first transmitted the 2.4G
signal of the "request to connect to the host" to the surrounding. The
indicator light of the blanket motherboard was flickering. At this time, the
surrounding host will receive a connection signal of the 2.4G blanket
control unit at the same time. When the host receives the connection
signal, the indicator light of the blanket control unit will be destroyed, the
host will always receive the connection and key signal of the 2.4G
blanket control unit, and operate the game. In the game, press the button
on the motherboard and then release it. The corresponding expression
of the indicator light is extinguished after litting.
2.4G blanket control unit will automatically search for signals of the host
after each electricity is on. Next, the carpet motherboard will
automatically search for about 15 seconds and enter the dormant mode.
2.4G blanket control unit and the normal use method of the host is: After
the host is powered first, the 2.4G blanket control unit is powered on.
When the battery power of the 2.4G blanket control unit is insufficient,
the key is not sensitive or delayed. At this time, please replace the 2 new
section 7 battery as soon as possible.