ALL-IN-ONE PROFESSIONAL CO., LTD www.jts.com.
1. Precautions 2. Features 3. Specification INDEX 1 2 3 3-1 All-in-One portable wireless active speaker // WA-35 3 3-2 UHF PLL Handheld Transmitter // Mh-35 4 4. Function Description 5 4-1 Multi-functional Wireless Portable Loud Speaker System //WA-35 5 4-2 Handheld transmitter // Mh-35 7 4-3 Accessories 8 5. Connection 6. Operation 7. Important notice on product 8. Important Notice Thank you for choosing the JTS wireless system.
1. Precautions 2. Features • • • Please read the User Instructions carefully before use. Please keep the User Instructions properly. Never place the device near a heat source, such as an oven, electric heater or other heating facility, so as to avoid the hazard of fire. • Never let the device in a moist, dusty environment of use for prolonged period; otherwise, it is likely to cause short circuit in the device.
3. Specification 3-1 All-in-One portable wireless active speaker // WA-35 3-2 UHF PLL Handheld Transmitter // Mh-35 Frequency Preparation......... PLL Synthesized Control Carrier Frequency Range..... 502~960MHz LED Display......................... 0~F DC power............................. 19~20V （48Wor above is recommend） Li-od Battery........................ 14.8V/2300mAh（Averaging of 4 hours charging time） Speaker ................................ 4“【4Ω full range driver】 Buid-in Audio...................
4. Function Description 4-1 Multi-functional Wireless Portable Loud Speaker System //WA-35 10 1. Function description of system panel 11 1 2 3 Power switch/Volume System power switch：the power switch on the main unit that controls the power to system; when it is turned Off, the other devices all are inoperable. ■ ON ： turn clockwise to switch on the power to main unit. ■ OFF：turn counterclockwise all the way till a ‘click’ sound. With the voltage indicator lamp out, the switching off is complete.
4-2 Handheld transmitter // Mh-35 15 4-3 Accessories Power switch : Press once to switch on. Press again for 3 seconds to switich off. 16 Channel select knob : Turn this rotational knob to point the arrow at the desired channel. 17 Battery status indicator lamp : Green–battery full Red–low battery; battery change is needed. 18 Battery compartment Waterproof cover AC/DC adapter (with AC power cord): /Spec of plug/ /Polarity/ AC IN: AC100-240V, 1.5A 50/60Hz DC OUT: 19V, 2.
5. Connection 6. Operation 5-1 System connection 6-1 WA-35 System settings 1.WA-35 wireless microphone system: Provides 16 preset UHF channels; built-in noise mute and tone key squelch, working with Mh-35 Handheld transmitter, able to operation distance of 100M. 2.Microphone wired: When the microphone with ψ6.3 plug is plugged in mode, an auto-detection device enables the system to enter from satand by mode into working mode automatically. 3.
Music playback mode In the Music playback mode, the playback of music files in USB/SD storage devices is supported, providing the user with handy selection. USB connection port 8 ：supports portable storage devices of Type-A USB port. SD card connection port 9 ：supports standard-size SD/MMC multimedia memory cards. 1. Device selection The priority for the player is to read from USB. When no such device is present, the program reads from SD card automatically.
Broadcast listening mode With the built-in FM tuner, you can save your preferred radio stations in the preset channels for ease of listening to your desired stations subsequently. ※Tuner bands: 87-108MHz in areas other than Japan; 76-90MHz in Japan 1.Using the tuner： Initial screen In the state of Stop in music mode： press ■/MP3/FM button 4 on the tuner to switch signal sources in the order of: USB→SD→FM.
8. Important Notice 7. Important notice on product WA-35 • • Please make sure to recharge the battery for 8 hours before the initial use. It is advised to keep the battery in workable condition at all times in order to avoid recharging a dead battery.To ensure best function and optimal time of use, it is recommended to recharge the device before using each time.
