TS3 (LTK-1300HN) Paging System Manual
NOTICE This manual, software and electronic circuitry are copyrighted. All rights reserved. Under the copyright laws, this manual, software and electronic circuitry may not be copied, in whole or in part without written prior consent of Lee Technology. All information provided in this document is carefully prepared and offered in good faith as a guide in the installation, use and servicing of our products.
IMPORTANT SAFETY INFORMATION Caution : Any changes or modifications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
1. PRODUCT INTRODUCTION 1) SUMMARY LEETEK’s Handheld Transmitter (new 10 key) was designed to help restaurants manage incoming customers efficiently and distinctively with portability and convenience. With simple operation of this product, a restaurant can provide instant notification to customer when customer’s table is ready, making them feel special and welcome.
Thank you for purchasing Handheld Table Scout. We are confident our cutting edge products and first rate service will satisfy your needs for years to come. Please read the manual thoroughly to familiarize yourself with the procedures for proper care of your system. 1. To Page 1)To page the pager, Press the pager number and then press Enter key ; Enter Pager no. >> Press Enter key >> Sending Cf.
Press “3” Press “Enter” PRESET3 Sending AM 10:00 (Current time) (2)To send Message(Numeric numbers) Message menu(MSG>ON) shall be set ON and Preset menu(PRE>OFF) shall be set OFF prior to use Message menu option - Press the pager no. and press Enter key - Enter the numeric numbers and then press Enter key ; Enter Pager no. >> Press Enter key >> input the max. 12 numeric numbers >> Press Enter key >> Sending Cf. Example to send the numeric number message (12345678) to the pager no.
Press “Clear” Sending AM 10:00 Cf. In this case, the pagers display (Current time) “20237” 5. Power On/Off 1) Power Off Following the below steps to turn its power off.
