User Manual

Brand: JTD
Model No.: JTD-008
Item Name: Wireless Karaoke Microphone
Website: http://www.jtechdigital.com
Telephone: [phone]
E-Mail: [e-mail]
Address: 12803 Park One Drive, Sugar Land
TX, 77478
1.EOV: Eliminate Original Voice, press once to lower the voice of the track
you are playing, press again to return the voice to normal volume
2.Mode: Choose between Bluetooth mode, MicroSD card or Line in (3.5mm)
3.Vol - : Turns down the microphone volume, the microphone speaker will
beep when the volume is at its softest
4.Vol + : Turns up the microphone volume, the microphone speaker will
beep when the volume is at its loudest
5.<Prev : Press once to play the previous track/file; hold down to lower the
volume of the microphone speaker
6.Next> : Press once to play the next track/file; hold down to raise the
volume of the microphone speaker
7.Power/Play/Pause: Hold down to power on or power off; press once to
pause or play the track/file
8.Power/Charging Indicator: The LED will shine blue when the microphone
is powered on, the LED will shine red when the microphone is charging. The
red LED will turn off once the microphone is finished charging.
1.The microphone will automatically power down when the battery
is too low
2.Charge the microphone using the supplied USB cable with any
USB power adapter (not included). When the microphone is
charging the LED on the front of the microphone will shine red
3.The microphone requires 4-5 hours to charge to full power. The
red LED will turn off once the microphone is fully charged
4.With a full charge, the microphone will work for 6-8 hours
1. J-Tech Digital Inc warrants the JTD-008 Wireless Karaoke Player to be free from
defects in workmanship and materials, under normal use and service for a period of 1
year from the date of purchase from J-Tech Digital Inc or one of its authorized resellers.
2. If the product does not operate as warranted during the applicable warranty period,
J-Tech Digital Inc shall, at its option and expense, execute one of the following as
necessary:
repair the defective product or part
Deliver to the customer an equivalent product or part to replace the defective item
3. All products that are replaced become the property of J-Tech Digital Inc. Replacement
products may be new or reconditioned. Repaired or replaced products are covered for
the remainder of the warranty period.
1.J-Tech Digital Inc shall not be responsible for any software, firmware, information or
memory data loss of contained in, stored on or integrated with any products returned to
J-Tech Digital Inc for repair/replacement under warranty.
1.If there is a quality problem within the first 30 days after the purchase dates, buyers
can return the item for a refund. If the device is defective, the buyer can have the device
replaced on behalf of J-Tech Digital within 1 year of their original purchase date. Buyer
must provide a proof of purchase and order number for all refunds or replacements.
2.Any customer service or technical support inquiries can be submitted to the support
team via phone or email:
1.Turn on the microphone, the blue LED will come on and you will hear a greeting from the speaker, followed by
“Bluetooth mode” to indicate that Bluetooth is enabled
2.Search Bluetooth ID “JTD-008” on a smart phone or tablet to connect. Once the microphone is successfully
connected you will hear an indication from the speaker.
Note: Press “0000” on smart phone/tablet for the password prompt when making the Bluetooth connection.
3.Play a music app on your smartphone or tablet, such as Spotify, iTunes, Pandora, etc., to listen through the
microphone speakers and sing along
4.Mix and match the microphone and music volume for the best karaoke singing
1.Connect a micro USB to 3.5mm cable to the microphone
2.Connect the 3.5mm jack to a smart phone or tablet
3.Play a music app on your smartphone or tablet, such as Spotify,
iTunes, Pandora, etc., to listen through the microphone speakers and
sing along and record
Note: If there is a MicroSD card in the microphone, select the Line In
mode and connect the smart phone or tablet in the same steps
mentioned above. If there is no MicroSD card the microphone will not
record anything
3.5mm auxiliary port
MicroSD card slot
USB charging/recording port
Problem Reason Soluon
Power LED indicator is not on
•Power is low,
•Charging cable is damaged or broken
•Charge the microphone to full power
•Check and replace the charging cable
Microphone has no sound
•Microphone is not powered on
•
Volume is turned all the way down
•Make sure the microphone is powered on
•
Turn the microphone volume up
Noise when singing or recording
•Noise from the environment
•Mobile signal interference
•Music App seng issue
•Move to a more quiet seng
•Move the microphone further from the
smartphone or tablet
•
Close and re-open the music App
Recording quality is poor
•The microphone is not compable
with certain mobile phones
•Reboot the phone or use another
smartphone
Music cuts out when in Bluetooth
mode
•The microphone is too far away from
the smartphone
•Obstacles are blocking the
microphone from the smartphone
•
Move the microphone closer t
o the smart
phone
•Move around or avoid obstacles between
the microphone and smartphone
Music is not loud enough
•Smartphone volume is too low
•Original music le or App volume is
too low
•Turn up the volume on the smartphone
•Choose another music le of higher quality
or a dierent music App
Bluetooth cannot connect to the
smartphone and other soware
or cannot be recorded
•The music App does not support
Bluetooth audio output
•Choose a proper music player App that
supports Bluetooth audio output
Manufacturer’s Warranty (1 year)
7.Service Instruction & Technical Support
1. Technical Specifications & Button Instruction Connection Jack, Accessories, Charging Instructions
6.Warranty Information Common Problems & Solutions
J-Tech Digital support team
Monday—Friday, 9AM-6PM CST
[e-mail]
1-888-610-2818