User's Manual

ManualsBrandsJSW Pacific ManualsCamera & PhotoWireless PIR Camera

User's Manual

Model No.: CCD-413

Wireless Weatherproof IP44 PIR

Sensor Camera

- Receiver with Patch Antenna

- 2.4GHz Wireless Camera with PIR Sensor LED

PLEASE READ CAREFULLY AND SAVE

This manual contains important information about this product's operation.

If you are installing this product for use by others you must leave this

manual -or a copy- with the end user.

Navigator

Summary of content (6 pages)

PAGE 1
Navigator R User's Manual Model No.: CCD-413 Wireless Weatherproof IP44 PIR Sensor Camera - Receiver with Patch Antenna - 2.4GHz Wireless Camera with PIR Sensor LED PLEASE READ CAREFULLY AND SAVE This manual contains important information about this product's operation. If you are installing this product for use by others you must leave this manual -or a copy- with the end user.
PAGE 2
Federal Communication Commission Interference Statement Important! Please read this booklet carefully before installing or using these units. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. DANGER- HIGH VOLTAGE- These units should ONLY be opened by an authorized technician if service is required.
PAGE 3
Model No.: CCD-413 Wireless Weatherproof IP44 PIR Sensor Camera Model No.: CCD-413 Wireless Weatherproof IP44 PIR Sensor Camera Contents Important Safety Precautions ..................................1 Specifications ............................................................2 Parts Included with This System .............................3 Parts of the Wireless PIR Pinhole Color Camera.....3 - Parts of the Camera ...............................................3 - Parts of the Receiver ....................
PAGE 4
Important Safety Precautions Please read before Installing Congratulations on your purchase of the 2.4GHz Wireless Color Monitoring System. Please read these safety and operating instructions carefully before installing and using this system. - Keep the camera, receiver and AC/DC adapter cord out of reach of children. - Do not place the camera, receiver or AC/DC adapter cord in a crib or playpen.
PAGE 5
Rotating the Antennas for Best Performance This system broadcasts its high-quality audio and video using directional antenna. The antenna can rotate in either clockwise or counterclockwise directions to obtain the best signal and picture clarity. In most situations, additional adjusting of 270º the antenna may be necessary to get optimal performance. If the camera and receiver are less than 10 feet apart, leave the antenna in the closed (down) position.
PAGE 6
Installing the Wireless PIR Pinhole Color Camera Parts Included with This System - Camera with Built-In Transmitter - 2.4 GHz Receiver - 7.5V AC/DC Adapter for the Camera - 10V AC/DC Adapter for the Receiver - A/V Cable WARNING! This system includes two AC/DC adapters with different voltage. Use the adapter labeled OUTPUT: 7.5V DC for the camera only. The adapter labeled OUTPUT : 10V DC is for use with the receiver only . The AC/DC adapters are not interchangeable.