Owner's Manual

ManualsBrandsJoytech ManualsElectronicsInfrared Forehead Thermometer

Table Of Contents

Owner's Manual

Infrared Forehead Thermometer

Model DET-3012b

Contents Introduction

1 2

Please read all instructions carefully and thoroughly

before using this product.

The DET-3012b infrared forehead thermometer is specifically

designed for safe use on the forehead. The Infrared Forehead

Thermometer is a device capable of measuring people's body

temperature by detecting the intensity of infrared light emitted from

the forehead.It converts the measured heat into a temperature reading

displayed on the LCD. The infrared forehead thermometer is intended

for the intermittent measurement of human body temperature from

the skin surface of forehead by people of all ages. When properly

used, it will quickly assess your temperature in an accurate manner.

forehead thermometer.

2. Do not touch the temperature probe with hands.

3. Use of this Forehead thermometer is not intended as a

substitute for consultation with your physician.

some parts are small enough to be swallowed.

5. Never immerse this device in water or other liquids(not

waterproof).

6. Do not modify this equipment without authorization of

manufacturer.

7. Do not expose the thermometer to temperature extremes

(below -25℃/-13℉ or over 55℃/131℉) nor excessive

humidity (>95%RH).

8. Keep the battery away from children.

1. There is no gender or age limitation for using infrared

Do not allow children to take their temperatures unsupervised,

9.Remove battery from the device when not in operation for

a long time.

Warning:

Introduction ......................................................02

Product Description

LCD Display Introduction

Basic Functions

Forehead Thermometer Advantages

Real Time Clock Setting ................................. . 07

Temperature Taking Hints

Memory Mode

Care And Cleaning

Battery Replacement

Specifications

Troubleshooting

Calibration

Service

Warranty

Electromagnetic Compatibility Information

............................................... 03

....................................... 04

................................................... 05

......................... 06

...................................09

Illustration For Use ..............................................12

........................................................16

...............................................17

............................................18

.....................................................19

...................................................20

.............................................................22

...............................................................23

...............................................................24

...............27

FCC ...............................................................25Information

Document No.: JDET-1204-005

Article No.: 003

Version:

Date of Issue: 2020-

Summary of content (9 pages)

PAGE 1
Owner's Manual Infrared Forehead Thermometer Model DET-3012b Document No.: JDET-1204-005 Article No.: 003 Version: Z Date of Issue: 2020- 12 Contents Introduction Introduction .. ......................................................02 Product Description ............................................... 03 LCD Display Introduction ....................................... 04 Basic Functions ................................................... 05 Forehead Thermometer Advantages Real Time Clock Setting ..
PAGE 2
Product Description LCD Display Introduction 1. Probe 2. Test Button 3. Memory Button 4. Setting Button 5.
PAGE 3
Real Time Clock Setting When using thermometer for the first time, please set the parameters of the thermometer. ①Set the unit Press Memory Button to select the unit you want. After the unit is set , press Setting Button ,the time format figure will appear . ② Set the time format The device can display the time in either an AM/PM (12-hour) or a 24:00 (24-hour) format. Press and release Memory button to select the format.
PAGE 4
Illustration For Use Illustration For Use How to change the forehead mode and object mode: To measure forehead temperature: 1. Press the Test Button, The display is activated to show all segments. After self-checking Figure 2 appears on the display screen with voice, so you can start a new measurement. 2. Aim the thermometer at the center of the forehead with a distance less than 5cm (See figure 3) and then press the Test Button. Note: Do not remove the thermometer from the forehead before hearing voice .
PAGE 5
Illustration For Use Memory Mode Match your thermometer with a Smart Device 1. The Memory Mode can be accessed ether in forehead mode or object mode: When the thermometer has been turned on and followed by Figure 2/4 or finished testing, press the Memory Button . The letter M will appear in the center right corner of the display. (See Figure 6) 2. The thermometer will automatically memorize the last 30 temperature readings. Each memory also records the measurement date/time/mode icon.
PAGE 6
Specifications Troubleshooting Measuring range Forehead mode: 34.0℃~43.0℃(93.2℉~109.4℉) Object mode: 0℃~100℃(32℉~212℉) Measuring site Forehead(Forehead Mode) Reference body site Oral (This thermometer converts the forehead temperature to display its “oral equivalent.”) Operation mode Forehead mode(Adjust mode) Error message Forehead mode: ±0.2℃ (0.4℉) during 35.5℃~42.0℃ (95.9℉~107.6℉) at 15℃~35℃ (59.0℉~95.0℉) operating temperature range ±0.3℃ (0.
PAGE 7
Service The thermometer has a limited one year warranty. Do not attempt to disassemble or repair the thermometer by yourself. Should service be required during or after the warranty period you must contact the manufacturer. Repackage the thermometer carefully in its original packaging or securely pack to avoid damage during shipping. Include the original sales slip indicating the date of purchase, a note describing the problem, and your return address. Send the thermometer prepaid and insured.
PAGE 8
Electromagnetic Compatibility Information Electromagnetic Compatibility Information The device satisfies the EMC requirements of the international standard IEC 60601-1-2.The requirements are satisfied under the conditions described in the table below.The device is an electrical medical product and is subject to special precautionary measures with regard to EMC which must be published in the instructions for use.Portable and mobile HF communications equipment can affect the device.
PAGE 9
Electromagnetic Compatibility Information Electromagnetic Compatibility Information Table 3 continued NOTE 1At 80 MHz and 800 MHz, the higher frequency range applies.NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.