INSTRUCTION MANUAL Papas an Chair IF YOU PURCHASED THE CHAIR ONLINE AND HAVE ANY QUESTIONS OR CONCERNS PLEASE CONTACT US WITH EMAIL OR TEXT Email: TEXT: +1 628-263-4608
WARNING: Proper use of the chair is for single person seating only. The chair is not to be used for standing purposes and will not function as a stool or step-ladder. Use on even surfaces only. Chair tested for use at weight of 3001b {136.4kg). Improper use of this product or failure to use as directed may result in injury. Not intended for commercial use. IMPORTANT: Please read all the instructions and warnings before assembling.
Assembly Instructions 1PC| (MX35MM) (M8) i 1PC 7 PCS) 8PCS| PCS PCS) PCS 1PC 1PC 1PC STEP Attach Swivel Base (B} to Chair Base (A) by using PCs Bolts (H) and Allen Wrench (1). Tighten all bolts in Step 1. STEP 2 Attach Chair Back Panel {D} and Chair Seat Panel {C} by using PCs Bolts (E), PCs Washers (F), PCs Nuts (G), Span er (J) and Allen Wrench (1}. Tighten all bolts in Step 2.
(STEP 3 h Attach Swivel Base (B) In Step 1 to Char Seat Panel (C) In Step 2 by using apes Bolts (H) and Allen Wrench (I). Tighten all bolts In Step 3. STEP 4 Put Seat Cushion (K) on the chair and tie it up. Now the chair is ready to use. IF YOU PURCHASED THE CHAIR ONLINE AND HAVE ANY QUESTIONS OR CONCERNS PLEASE CONTACT US WITH EMAIL OR Message Email: \_ TEXT: +1 628-263-4608 J 4