INSTRUCTION MANUAL 11 Ft x 11 Ft Pop Up Canopy with Netting After Sale Service: service@joysidefurniture.
WARRANTY Please read and save these instructions before attempting to set up this canopy. 6-month Limited Warranty We warrant for a period of 6 months from the original date of purchase, this product against any defects in materials or workmanship. At its discretion, we may provide replacement parts to original purchaser. Original receipt or proof of purchase as well as proof of defect is required. We will not be responsible for shipping costs incurred outside the continental USA.
PACKING INCLUDES Part List A - Canopy Frame (1pc) D - Big Top (1pc) B - Eave Extender (4pcs) C - Small Top (1pc) E - Mosquito Netting (1pc) F - Carry Bag (1pc) Hardware AA - Stake (8pcs) BB - Big Stake (4pcs) DD - Netting Rope (2pcs) CC - Rope (4pcs) EE - Ring (32pcs) 2
ATTACH THE BIG TOP Step 1 You will need: ● Partially open the frame (A). ● Insert the exposed end of the eave extender (B) into the fittings at each corner of the frame (A) . They will click into place. ● Unfold the large canopy top (D) and place it over the open frame. Align the corner pockets with the frame corners. ● Pull the corner of the canopy over each each Eave Extender tube, making sure the tube goes inside the canopy pocket.
ATTACH TNE SMALL TOP & UNFOLD THE CANOPY Step 2 You will need: C ● Place the small canopy top over the central hub of the frame. Secure each of the four corners of the solid fabric onto hooks of the central frame as shown. ● With the help of another person, pull the frame outward from opposite corners to unfold your canopy.
LOCK THE FRAME & ADJUST THE CANOPY HEIGHT Step 3 Click Click ● Raise and lock your canopy frame by pushing the corner slider up until each one locks into place. ● Your canopy height is adjusted by pushing the circular push pin in to unlock the legs. Pull or push on the bottom leg section to raise or lower the canopy height.
ATTACH THE NETTING ROPES Step 4 You will need: 2X ● Secure the ends of the ropes to adjacent corners of the frame above each leg by tying a knot. ● Reinforce the ropes on each side by securing them with the included velcro straps. ● Finish attaching the large canopy inside the canopy frame using the Velcro loops.
ATTACH THE MOSQUITO NETTING Step 5 You will need: 32X ● Open the curtain rings and loop them through the sewn-in loops on the top edge of the mosquito netting. ● Secure the mosquito netting to the ropes using the curtain rings. Continue around the canopy until the entire mosquito net is secured. ● The netting/curtains can be tied back once attached.
SECURE THE CANOPY IN PLACE Step 6 You will need: ● Insert the leg skirt hook to the bottom of the canopy legs. ● Use 2pcs stakes at each foot to secure your canopy down and keep it from moving.
SECURE THE CANOPY IN PLACE Step 7 You will need: ● Attach ropes at the top four corners of the canopy and secure them into othe ground using the big stakes for added stability.
TAKE DOWN THE CANOPY 1 2 Pull up all stakes from the Remove the mosquito netting if attached. ground. Push 3 Press the push pin on each 4 leg and retract the legs to their original height. Push the push button on each slider to unlock the frame. 5 Push inward until the frame is fully closed. UNLOCK 6 Remove the eave extander 7 at each corner of the frame. 10 Slide the carry bag over the closed frame and close the zipper on carry bag.
REPLACEMENT PARTS Spare Parts 7 1 6 2 3 8 9 10 4 5 1 2 3 4 5 7 6 8 9 10 11 12 14 15 13 16 17 Part Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Central Cap Top Cap Slider Leg Assembly Plastic Foot Ceiling Assembly Eave Extender Middle Bolt Kit Side Bolt Kit Eave Assembly Small Top Big Top Mosquito Netting Carry Bag Stake Big Stake Rope Netting Rope Ring 18 19
