User Manual

Warranty Card
The product is a 20W power bank with ring holder. It supports
both wired and wireless charging, and can charge 3 devices
simultaneously. It provides charging for mobile phones, tablets,
e-book readers, watches, game consoles, etc. It supports PD3.0,
QC3.0, AFC fast charge protocols. It is compatible with 5W, 7.5W,
10W, 15W magnetic charging. With N52H ultra-strong magnets,
it holds the phone securely and ensures continuous charging.
The LED indicators let you know the remaining power in real
time. The product has a built-in smart chip and a variety of safety
protections such as over-charge, over-discharge, over-voltage
and over-temperature protection, etc.
Type-C input/output USB output
LED
indicator
Product introduction Parameters
Product diagram
Wireless Power Bank with Ring Holder 10000mAh
User Manual
No.:
Date of purchase:
Customer:
Dealer:
Batch number:
Name: Telephone:
Address:
Please fully charge the power bank when using it for
the first time.
Please pull out the charging cable in time after fully
charged to avoid energy loss.
Please use suitable cables and accessories to make
the power bank function normally.
Do not drop, impact, disassemble the product or try to
repair it by yourself.
Do not store the product in a wet place or immerse it
in water.
Do not expose or store the product near a heat source
or flammable materials.
Do not leave this product in the car. The high
temperature of sunlight will damage the product.
Please keep it out of the reach of children to avoid
improper use.
Do not put any foreign object into the USB/Type-C
input/output ports of the product to avoid short circuit
or damage.
Please charge the power bank fully at least once every
four months to prolong its service life.
Please stop using the product in case of swelling,
leakage, deformation of battery and other
abnormalities.
Do not disassemble the product by yourself. Any
shortened service life or damage caused by improper
use or storage of the product by customer will not be
borne by our company.
Avoid using chargers with excessive output current or
load.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Warm reminders
After-sale service regulations:
1. Consulting service: Please read the User Manual
carefully before using the product and keep it for future
use.
2. Replacement service: The company undertakes that if
there is product failure within 7 days from the date of
purchase that is not caused by human error, the customer
can choose between replacement and repair freely (if the
appearance is in good condition, it will be repaired)
provided that the product, its accessories and packaging
are complete and in good condition. The customer can
ask the local authorized dealer to deal with it.
3. Warranty service: In case of product failure within the
warranty period that is not caused by human error, free
warranty service will be provided within one year. In case
of product failure caused by human error, we will charge
for relevant repairing.
4. Charged repairing service: In case of product failure
within one to three years from the date of purchase,
charged repairing service will be provided. Users need to
pay for the components, transportation and labor costs.
5. Warranty exceptions (you need to pay for relevant
service):
➀ Expired the warranty period;
➁ There’s alteration on the Warranty Card, or the serial
number is inconsistent with the product itself;
➂ Product damage caused by accidents or human error
(e.g.: customer fails to use, maintain and store the product
according to the User Manual; incorrect installation,
improper power supply, water intrusion, etc.)
➃ Failure to provide Warranty Card and valid invoice (except
that you can prove that the product is within the warranty
period).
➄ Product damage caused by force majeure, such as
earthquake, fire disaster, flood, thunderstroke, etc.
➅ Product damage caused by disassembling, repairing or
refitting the product without authorization.
Operation instructions
100 %
75 %
50 %
25 %
LED indicator
Wired
charging
indicator
Wireless
charging
indicator
Indicator Status
Constant white light
Constant white light
Constant ice blue light
Flashing green light
Product Status
Standby
Wired charging status
Wireless charging status
Abnormity detected
4. Charging indicator instructions
wireless
charging area
1. Power on
➀ Press the button once to power it on.
➁ Connect device to have it automatically power on.
2. LED light
➀ In turned on status, you can
check the remaining power
capacity.
➁ If no device is connected in 30s,
the product will enter sleep mode
and the LED light will turn off automatically.
3. Wireless charging tips
Place your mobile phone that supports wireless
charging in the wireless charging area of the
product (as shown in the figure
below) for accurate alignment,
it will enter wireless
charging status
instantly.
➂ Wireless charging is more convenient than wired
charging, but confined by current wireless charging
technology, its charging speed is slower than that of
wired charging.
➃ High temperatures will reduce charging speed
and restrict power, which is something that
happens to all wireless chargers.
➄ It is recommended that you charge your device in
environments with temperatures below 25°C / 77°F.
5. Using environment
Using ambient temperature: 0℃ to 40℃,
non-tropical area
Storage ambient temperature: 0℃ to 40℃
6. Recharge the power bank
Use the USB to Type-C cable to connect the Type-C
port of the power bank with the charger. The LED
light keeps flashing which means the power bank is
being recharged. When it is fully recharged, the LED
light will stop flashing and be constant on.
Noto: please recharge the product with a charging
cable and charger of nominal specifications.
Wireless charging precautions
➀ This wireless power bank is not compatible with
non-MagSafe phone cases, such as Otterbox
Defender cases.
➁ Do not use an adapter with an output of 5V 1A
(5W) or less.
Packing list
Power bank x1
Manual &
Warranty card x1
Charging Cable x1
Power button
Model
Battery Capacity
Rated Capacity
Energy conversion
rate
Type-C Input
Type-C Output
USB Output
Wireless Charging
Output
Multi-port Output
Material
Size
Net Weight
JR-W050
10000mAh 3.7V (37Wh)
6000mAh (5V 3A)
≥80%
5V 3A 9V 2A 12V 1.5A
5V 2.4A 9V 2.22A 12V 1.67A
5V 3A 9V 2A 12V 1.5A
5W/7.5W/10W/15W
5V 3A (MAX)
ABS+PC fireproof material
105*60.5*23.5mm
213g
FCC Warning Statement
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
--Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver
--Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV
technician for help.
原材料 机乐堂 JR-W050 20W 磁吸指环支架无线充移动电源10000mAh 说明书(认证版)
尺寸：60x80mm
材质：128g铜版纸+正反单色印刷+风琴折
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. During the operation of device a
distance of 0 cm surrounding the device and 0 cm above the top surface of the device
must be respected.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause undesired operation.