User's Manual

22
21
19
20
14
17
15
18
13
16
Quick Start Guide
CAMERA SETUP
1.
Plug the connector of the AC adaptor to the DC power input in the back of the Camera.
2.
Plug the AC adapter to a wall socket nearest to the location you wish to place the camera.
3.
Press the power button on the front of the camera for about 1 second or until the power light turns on.
4.
Make sure the VOX switch, on the bottom of the camera, is in the desired On or OFF position. (If you
wish to use the Voice Activated Picture and Sound feature, please refer to your owner’s manual.)
5.
Select the preferred Night Light Mode Setting.
ON – The Night Light will remain ON.
AUTO – The Night Light will turn on automatically in the dark.
OFF – The Night Light will remain OFF.
6.
Tilt & position the Camera to get the best
view of the area you are monitoring.
13 - Night Light
14 - IR Night Vision LED’s
15 - Lens
16 - Microphone
17 - Light Sensor
18 - Power ON/OFF with LED
19 - Link/Code Key
20 - DC Power Input
21 - Night Light Mode Switch
22 - Voice Activation (VOX) Switch