User's Manual

ManualsBrandsJoyo Electronics ManualsBaby MonitorsWireless Baby Monitor

TABLE OF CONTENT

Page

TABLE OF CONTENT

INTRODUCTION

PACKAGE CONTENT

PICTURE OF MONITOR UNIT

PICTURE OF CAMEAR UNIT

SAFETY INSTRUCTION

STATEMENT ON REGULATION

INSTALLATION

INSTALLATION BATTERY

INSTALLATION AC/DC ADAPTOR

SPECIAL NOTE FOR JY-229TC

MOUNTING THE CAMERARE

CHARGING THE UNIT

CAMERA OPERATION

POWER ON/OFF

CHANNEL SELECTION

AUDIO VIDEO INPUT

VOICE ACTIVATION

AUTOMATIC INFRARED NIGIT VISION

MONITOR OPERATION

POWER ON/OFF

CHANNEL SLECTION

AUTOMATIC CHANNEL SCAN

LCD ON/OF

FBRIGHTNESS CONTROL

AUDIO VIDEO OUTPUT LINK

TROUBLE SHOOTING

INTRODUCTION

We are grateful you decided to purchase this 2.4GHz Color LCD A/V

Wireless Monitor, which incorporate the latest in advanced technology. We

feel strongly that you will be pleased with the quality and features of this

product.

This 2.4GHz Color LCD A/V Wireless Monitor enables you to transmit

picture and sound signals cordlessly, which most ideal for applications such

as baby monitoring, household security, office or warehouse surveillance

system, etc.

PACKAGE CONTENT

Please note that the package should include the follows:

a) 1 x Camera Unit

b) 1 x Monitor Unit

c) 1 x Charging Base Unit (JY-238R only)

d) 2 x AC/DC adaptors

e) 2 x Audio/Video Cord (1 for JY-229TC)

f) This instruction manual

Optional Accessories --- Rechargeable Batteries

If you find any of the above missing, please contact your retailer.

Summary of content (7 pages)

PAGE 1
TABLE OF CONTENT INTRODUCTION Page TABLE OF CONTENT 1 INTRODUCTION 2 PACKAGE CONTENT PICTURE OF MONITOR UNIT PICTURE OF CAMEAR UNIT SAFETY INSTRUCTION STATEMENT ON REGULATION 2 3 4 5 7 INSTALLATION 8 INSTALLATION BATTERY INSTALLATION AC/DC ADAPTOR SPECIAL NOTE FOR JY-229TC MOUNTING THE CAMERARE CHARGING THE UNIT 8 8 9 9 10 CAMERA OPERATION 11 POWER ON/OFF CHANNEL SELECTION AUDIO VIDEO INPUT VOICE ACTIVATION AUTOMATIC INFRARED NIGIT VISION 11 11 11 11 12 We are grateful you decided to purchas
PAGE 2
PICTURE OF MONITOR UNIT PICTURE OF CAMERA UNIT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24.
PAGE 3
Please observe the following precautions to prevent fire, personal injury, and product damage: Power Source: Besides batteries operated, the 2.4GHz Color LCD A/V Monitor should be connected to a power supply only of the type described in this operating instruction (AC/DC adaptors: 9V 500mA Centre Positive). Read Instructions: All the safety and operating instructions should be read before the 2.4GHz Color LCD A/V Wireless Monitor is operated. Cleaning: Use a dry cotton cloth to keep the 2.
PAGE 4
STATEMENT ON REGULATION INSTALLATION This product is designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
PAGE 5
Use only the AC adaptors supplied with the package. RECHARGING THE UNIT Before plug in AC adaptors, please make sure only rechargeable NiMH batteries [or no battery] are inside the battery compartment. ( NOT APPLICABLE FOR JY-229TC & JY-238T) Camera and monitor of your 2.4GHz Color LCD A/V Wireless Monitor have built-in battery recharging circuit. Make sure only rechargeable NiMH batteries are inside the battery compartment before plug in AC/DC adaptors.
PAGE 6
CAMERA OPERTATION signal input is not used. Power ON/OFF NOTE: LCD on the Monitor unit will be automatically switched off if no signal is received from the Camera Use the Power ON/OFF sliding switch to turn ON/OFF the unit. For JY-229TC, switch the Channel Selection switch at the bottom of the unit to any one of the 4 channels to turn on the unit. To Deactivate: Select the CAMERA or AV option by the Voice Activation switch.
PAGE 7
channels can then be seen on the Monitor unit. TROUBLESHOTTING LCD On/Off Problem No reception This power saving feature is located on the side of the monitor. When the monitor is switched to LCD “off” position and the camera is remained power on, there will be no picture on the monitor screen. The unit is using smaller amount of power and is still operational. You can still hear the sound signal that captured from the monitoring area.