User's Manual

ManualsBrandsJOYMAX ELECTRONICS ManualsElectronics2.4GHz ZigBee Wireless Module

JOYMAX MD-120FC User Manual

V1.01

Benefits



 Microminiature module solutions



 Ready to use in products



 Minimizes product development time



 No RF test required for systems



 Compliant with FCC part 15 rules, IC Canada

Features: Module

 2.4GHz IEEE802.15.4 & ZigBee

PRO Compatible

 2.7 -3.6V for SOC

 Sleep Current ( with Active Sleep

Timer ) 2.6µA

 Receiver Sensitivity -98dBm

 TX Power +17.23dBm

 TX Current 130mA

 RX Current 30mA

 Dimension: 30 *18*3.5mm

 Weight: 2.0g

Features: Microcontroller

 32-Bit RISC CPU,up to 32MIPs

with low power

 128KB RAM, 128KB ROM

 4Mbit serial flash for program

code and data

 On chip OTP efuse

 JTAG debug interface

 4-input 12-bit ADC, 2 12-Bit

DACs, 2 Comparators

 3 Application Timer / Counters,

3 System Timers

 2 UARTs (One for In-System

Debug)

 SPI Port with 5 Selects

 2-Wire Serial Interface

 4-wire digtal audio interface

 Watchdog timer

 19 GPIO

Temperature Range

-40°C to +85°C

Humidity

10 to 95% RH

Lead-Free and RoHS Compliant

IEEE802.15.4 / ZigBee Module High Power w/ uFL connector

Overview

This MD-120FC-5148A ZigBee Module w/ uFL connector is a surface mount module with

52.84mW output power that enables users to implement IEEE802.15.4 or ZigBee PRO

networking applications with minimum time to market and at the lowest cost. They remove the

need for expensive and lengthy development of custom RF board designs and test suites. The

modules provide a comprehensive solution with high radio performance and all RF

components included. All that is required to develop and manufacture wireless control or

sensing products is to connect a power supply and peripherals such as switches, actuators

and sensors, considerably simplifying product development.

Applications



 Robust and secure low power wireless applications



 ZigBee PRO networks



 Home and commercial building automation



 Home networks



 Toys and gaming peripherals



 Industrial systems



 Telemetry and utilities

(e.g. AMR)

Summary of content (13 pages)

PAGE 1
JOYMAX MD-120FC User Manual IEEE802.15.4 / ZigBee Module High Power w/ uFL connector Overview This MD-120FC-5148A ZigBee Module w/ uFL connector is a surface mount module with 52.84mW output power that enables users to implement IEEE802.15.4 or ZigBee PRO networking applications with minimum time to market and at the lowest cost. They remove the need for expensive and lengthy development of custom RF board designs and test suites.
PAGE 2
JOYMAX MD-120FC User Manual Revised History Date Revision Description 2012/03/20 1.0 1st Released Table of Contents 1. Introduction..........................................................................................................3 1.1 Key Features.............................................................................................3 1.1.1 Module ...............................................................................................3 1.1.2 Microcontroller .....................
PAGE 3
JOYMAX MD-120FC User Manual 1. Introduction This MD-120FC-5148A ZigBee Module w/ uFL connector is a surface mount module with 52.84mW output power that enables users to implement IEEE802.15.4 or ZigBee PRO networking applications with minimum time to market and at the lowest cost. They remove the need for expensive and lengthy development of custom RF board designs and test suites. The modules provide a comprehensive solution with high radio performance and all RF components included.
PAGE 4
JOYMAX MD-120FC User Manual 2. Specifications VDD=3.0V @ +25°C Typical DC Characteristics Deep Sleep Current Sleep Current Radio Transmit Current Radio Receive Current 1.3uA 2.
PAGE 5
JOYMAX MD-120FC User Manual 3. Install Information Install Hardware: 3.1 PCB Footprint Figure: Module PCB footprint RF note for MD-120FC-5148A modules with uFL connector: No components, ground plane or tracks on any layer of the mother board should be placed within 20mm of the 3 free sides of the antenna. Tracks etc may be placed adjacent to the can, but should not extend past the can towards the antenna end of the module for 20mm from the antenna. 5 V1.
PAGE 6
JOYMAX MD-120FC User Manual 3.
PAGE 7
JOYMAX MD-120FC User Manual Pin Signal Function Alternative Function 3 DAC2 Digital to Analogue output 4 COMP2+ 5 COMP2- 6 SPICLK SPI master clock out 7 SPIMISO SPI Master In/Slave Out 8 SPIMOSI SPI Master Out/Slave In 9 SPISSZ SPI select from module - SS0 (output) 10 DIO0 DIO0 or SPI Slave Select1 (output) SPISEL1 11 DIO1 DIO1, SPI Slave Select2 (output) or Pulse Counter0 Input SPISEL2 PC0 12 NC 13 SPISSM SPI select to FLASH (input) 14 SPISWP FLASH write protect (in
PAGE 8
JOYMAX MD-120FC User Manual Pin Signal Function Alternative Function 28 DIO13 DIO13, Timer1 PWM (output), Antenna Diversity or Digital Audio Data Input TIM1_OUT ADE 29 RESETN Reset input 30 DIO14 DIO14, Serial Interface clock or Intelligent peripheral clock Input SIF_CLK IP_CLK 31 DIO15 DIO15, Serial Interface data or Intelligent peripheral data out SIF_D IP_DO 32 DIO16 DIO16, Intelligent peripheral Data In IP_DI IP_SEL DAI_SCK DIO17 DIO17, UART1 Clear To Send (input), Intellig
PAGE 9
JOYMAX MD-120FC User Manual Install Software： Click flash program to execute the NXP Flash Programmer. The location of Bin file Choose Com Port Set Baud Rate Chipset ID & Flash ID Read MAC ID Program MAC ID (.
PAGE 10
JOYMAX MD-120FC User Manual 4. FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 11
JOYMAX MD-120FC User Manual IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied.
PAGE 12
JOYMAX MD-120FC User Manual 5. IC Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
PAGE 13
JOYMAX MD-120FC User Manual LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX IC: 8520A-MD120FC The device is intended only for OEM integrators under the following conditions: According to FCC Part 15 Subpart C Section 15.212 and IC RSS-GEN 3.1, the radio elements of the modular transmitter must have their own power supply.