User's Manual

JO Y M A X M D -1 2 0 A C U s e r M a n u a l
V1.01
1
Benefits
Microminiature module solutions
Ready to use in products
Minimizes product development time
No RF test required for systems
Compliant with FCC part 15 rules, IC Canada
Features: Module
2.4GHz IEEE802.15.4 & ZigBee
PRO Compatible
2.7 -3.6V for SOC
Sleep Current ( with Active Sleep
Timer ) 2.6µA
Receiver Sensitivity -98dBm
TX Power +20dBm
PIFA Antenna Gain +3.5dBi
TX Current 130mA
RX Current 30mA
Dimension
30 *18*3.5mm
Weight2.5g
Features: Microcontroller
32-Bit RISC CPU,up to 32MIPs
with low power
128KB RAM, 128KB ROM
4Mbit serial flash for program
code and data
On chip OTP efuse
JTAG debug interface
4-input 12-bit ADC, 2 12-Bit
DACs, 2 Comparators
3 Application Timer / Counters,
3 System Timers
2 UARTs (One for In-System
Debug)
SPI Port with 5 Selects
2-Wire Serial Interface
4-wire digtal audio interface
Watchdog timer
19 GPIO
Temperature Range
-40°C to +85°C
Humidity
10 to 95% RH
IEEE802.15.4 / ZigBee PIFA High Power Module Family
Overview
This MD-120AC-5148A ZigBee PIFA Module is a surface mount module with 100mW output
power that enables users to implement IEEE802.15.4 or ZigBee PRO networking applications
with minimum time to market and at the lowest cost. They remove the need for expensive and
lengthy development of custom RF board designs and test suites. The modules provide a
comprehensive solution with high radio performance and all RF components included. All that
is required to develop and manufacture wireless control or sensing products is to connect a
power supply and peripherals such as switches, actuators and sensors, considerably
simplifying product development.
Applications
Robust and secure low power wireless applications
ZigBee PRO networks
Home and commercial building automation
Home networks
Toys and gaming peripherals
Industrial systems
Telemetry and utilities
(e.g. AMR)

Summary of content (9 pages)