User's Manual

ManualsBrandsJOYMAX ELECTRONICS ManualsElectronicsIEEE802.15.4 / ZigBee uFL Module Family

JO Y M A X M D 1 0 2 F C U s e r M a n u a l

V1.01

Benefits

• Microminiature module solutions

• Ready to use in products

• Minimizes product development time

• No RF test required for systems

• Compliant with FCC part 15 rules, IC Canada

Features: Module

• 2.4GHz IEEE802.15.4 & ZigBee

PRO Compatible

• 2.3-3.6V for SOC

• Sleep Current ( with Active Sleep

Timer ) 2.6µA

• Receiver Sensitivity -95dBm

• TX Power +2dBm

• TX Current 15mA

• RX Current 17.5mA

• Dimension32.2*18*3.5mm

• Weight3.0g

Features: Microcontroller

• 32-Bit RISC CPU,up to 32MIPs

with low power

• 128KB RAM, 128KB ROM

• 4Mbit serial flash for program

code and data

• On chip OTP efuse

• JTAG debug interface

• 4-input 12-bit ADC, 2 12-Bit

DACs, 2 Comparators

• 3 Application Timer / Counters,

3 System Timers

• 2 UARTs (One for In-System

Debug)

• SPI Port with 5 Selects

• 2-Wire Serial Interface

• 4-wire digtal audio interface

• Watchdog timer

• 21 GPIO

Temperature Range

-40°C to +85°C

Humidity

10 to 95% RH

Lead

ree and RoHS

ompliant

IEEE802.15.4 / ZigBee uFL Module Family

Overview

This MD-102FC-5148A ZigBee Module built with a u.FL connector is a surface mount module

with 1mW output power that enables users to implement IEEE802.15.4 or ZigBee PRO

networking applications with minimum time to market and at the lowest cost. They remove the

need for expensive and lengthy development of custom RF board designs and test suites. The

modules provide a comprehensive solution with high radio performance and all RF

components included. All that is required to develop and manufacture wireless control or

sensing products is to connect a power supply and peripherals such as switches, actuators

and sensors, considerably simplifying product development.

Applications

• Robust and secure low power wireless applications

• ZigBee PRO networks

• Home and commercial building automation

• Home networks

• Toys and gaming peripherals

• Industrial systems

• Telemetry and utilities

(e.g. AMR)

Summary of content (18 pages)

PAGE 1
JO Y M A X M D 10 2 FC U s e r M a n u a l IEEE802.15.4 / ZigBee uFL Module Family Overview This MD-102FC-5148A ZigBee Module built with a u.FL connector is a surface mount module with 1mW output power that enables users to implement IEEE802.15.4 or ZigBee PRO networking applications with minimum time to market and at the lowest cost. They remove the need for expensive and lengthy development of custom RF board designs and test suites.
PAGE 2
JO Y M A X M D 10 2 FC U s e r M a n u a l Revised History Date Revision Description 2011/01/03 1.0 1st Released Table of Contents 1. 2. 3. 4. 5. 6. 7. Introduction...................................................................................................... 3 1.1 Key Features ......................................................................................... 3 1.1.1 Module........................................................................................... 3 1.1.
PAGE 3
JO Y M A X M D 10 2 FC U s e r M a n u a l 1. Introduction This MD-102FC-5148A ZigBee Module built with a u.FL connector is a surface mount module with 1mW output power that enables users to implement IEEE802.15.4 or ZigBee PRO networking applications with minimum time to market and at the lowest cost. They remove the need for expensive and lengthy development of custom RF board designs and test suites.
PAGE 4
JO Y M A X M D 10 2 FC U s e r M a n u a l 2. Specifications VDD=3.0V @ +25°C Typical DC Characteristics Deep Sleep Current Sleep Current Radio Transmit Current Radio Receive Current 1.3uA 2.6uA 15mA 17.
PAGE 5
JO Y M A X M D 10 2 FC U s e r M a n u a l 3. Pin Configurations Figure : MD-102FC-5148A Pin Configuration(Top View) 5 V1.
PAGE 6
JO Y M A X M D 10 2 FC U s e r M a n u a l 3.
PAGE 7
JO Y M A X M D 10 2 FC U s e r M a n u a l Pin Signal Function Alternative Function 26 VSSA Analogue ground 27 DIO12 DIO12, Timer1 capture (input), Antenna Diversity or Digital Audio Word Select TIM1_CAP ADO DAI_WS 28 DIO13 DIO13, Timer1 PWM (output), Antenna Diversity or Digital Audio Data Input TIM1_OUT ADE DAI_SDIN 29 RESETN Reset input 30 DIO14 DIO14, Serial Interface clock or Intelligent peripheral clock Input SIF_CLK IP_CLK 31 DIO15 DIO15, Serial Interface data or Intel
PAGE 8
JO Y M A X M D 10 2 FC U s e r M a n u a l 4. Additional Information 4.1 Outline Drawing Figure : MD-102FC-5148A Outline Drawing 8 V1.
PAGE 9
JO Y M A X M D 10 2 FC U s e r M a n u a l 4.2 Module PCB Footprint Figure : Module PCB footprint 9 V1.
PAGE 10
JO Y M A X M D 10 2 FC U s e r M a n u a l 4.
PAGE 11
JO Y M A X M D 10 2 FC U s e r M a n u a l 4.4 Tape and Reel Information 4.4.1 Tape Orientation and dimensions All dimensions are in mm Module type MD-102FC-5148A Tolerance A B 18.5 32.7 ±0.1 ±0.1 W 44 ±0.3 F E 20.2 1.75 ±0.1 +0.1 P0 4.0 ±0.1 P1 2.0 ±0.1 P2 24.0 ±0.1 T 3.4 ±0.1 Cover Tape width (W) 37.5 ±0.1 4.4.2 Cover tape details Thickness (T) 0.
PAGE 12
JO Y M A X M D 10 2 FC U s e r M a n u a l 4.4.3 Leader and Trailer 300 MM 300 MM 4.4.4 Reel Dimensions Module type: A B C N W (min) MD-120FA-5139A 330 ±1.0 2.2±0.5 13 ±0.2 100 +0.1 45.5±0.3 12 V1.
PAGE 13
JO Y M A X M D 10 2 FC U s e r M a n u a l 4.5 SMT IR Profile Average ramp-up rate (217C to peak): 3 A /sec. max. Preheat 150~200 AB60~180 seconds Temperature maintained above 217 oC : 60~150 seconds Time within 5 A of actual peak temperature: 20 ~ 40 sec. Peak temperature 250+0/-5 A Ramp-down rate : 6 A/sec. max. Time 25 A to peak temperature : 8 minutes max. Cycle interval 5 minus 4.
PAGE 14
JO Y M A X M D 10 2 FC U s e r M a n u a l 5. FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 15
JO Y M A X M D 10 2 FC U s e r M a n u a l LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: XNNMD102FC ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules.
PAGE 16
JO Y M A X M D 10 2 FC U s e r M a n u a l 6. IC Statement This Class B digital apparatus complies with Canadian ICES-003. &HW DSSDUHLO QXPpULTXH GH OD FODVVH % HVW FRQIRUPH i OD QRUPH 10% GX &DQDGD Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
PAGE 17
JO Y M A X M D 10 2 FC U s e r M a n u a l USERS MANUAL OF THE END PRODUCT: The end user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.
PAGE 18
JO Y M A X M D 10 2 FC U s e r M a n u a l 7. Contact Information Headquarter(Taiwan) JOYMAX ELECTRONICS CO., LTD. No. 5, Dong Yuan Rd.2, Jhongli Industrial Park, Jhongli City, Taoyuan 32063, Taiwan, R.O.C. Tel: +886-3-433-5698 Fax: +886-3-433-5798 E-mail: info@joymax.com.tw website: http://www.joymax.com.tw http://www.joymax-antenna.com Europe Joymax Europe GmbH Buettgenbachstr. 10 D-40549 Duesseldorf Germany Tel : 49-211-984 937 Fax : 49-211-984 9399 E-mail : info@joymax.de http://www.joymax.de U.S.