User's Manual
JO Y M A X M D 1 0 2 A C U s e r M a n u a l
V1.01
1
Benefits
• Microminiature module solutions
• Ready to use in products
• Minimizes product development time
• No RF test required for systems
• Compliant with FCC part 15 rules, IC Canada
Features: Module
• 2.4GHz IEEE802.15.4 & ZigBee
PRO Compatible
• 2.3-3.6V for SOC
• Sleep Current ( with Active Sleep
Timer ) 2.6µA
• Receiver Sensitivity -95dBm
• TX Power +2dBm
• TX Current 15mA
• RX Current 17.5mA
• Dimension32.2*18*3.5mm
• Weight3.0g
Features: Microcontroller
• 32-Bit RISC CPU,up to 32MIPs
with low power
• 128KB RAM, 128KB ROM
• 4Mbit serial flash for program
code and data
• On chip OTP efuse
• JTAG debug interface
• 4-input 12-bit ADC, 2 12-Bit
DACs, 2 Comparators
• 3 Application Timer / Counters,
3 System Timers
• 2 UARTs (One for In-System
Debug)
• SPI Port with 5 Selects
• 2-Wire Serial Interface
• 4-wire digtal audio interface
• Watchdog timer
• 21 GPIO
Temperature Range
-40°C to +85°C
Humidity
10 to 95% RH
Lead
-
F
r
ee and RoHS
C
ompliant
Features: Module
• 2.4GHz IEEE802.15.4 & ZigBee
PRO Compatible
• 2.3-3.6V for SOC
• Sleep Current ( with Active Sleep
Timer ) 2.6µA
• Receiver Sensitivity -95dBm
• PIFA Antenna Gain +3dBi
• TX Power +2dBm (without PIFA
Antenna )
• TX Current 15mA
• RX Current 17.5mA
• Dimension30*18*3.5mm
• Weight3.0g
Features: Microcontroller
• 32-Bit RISC CPU,up to 32MIPs
with low power
• 128KB RAM, 128KB ROM
• 4Mbit serial flash for program code
and data
• On chip OTP efuse
• JTAG debug interface
• 4-input 12-bit ADC, 2 12-Bit DACs,
2 Comparators
• 3 Application Timer / Counters,
3 System Timers
• 2 UARTs (One for In-System
Debug)
• SPI Port with 5 Selects
• 2-Wire Serial Interface
• 4-wire digtal audio interface
• Watchdog timer
• 21 GPIO
Temperature Range:-40°C to +85°C
Humidity:10 to 95% RH
Lead-Free and RoHS Compliant
IEEE802.15.4 / ZigBee PIFA Module Family
Overview
This MD-102AC-5148A ZigBee PIFA Module is a surface mount module with 1mW output
power that enables users to implement IEEE802.15.4 or ZigBee PRO networking applications
with minimum time to market and at the lowest cost. They remove the need for expensive and
lengthy development of custom RF board designs and test suites. The modules provide a
comprehensive solution with high radio performance and all RF components included. All that
is required to develop and manufacture wireless control or sensing products is to connect a
power supply and peripherals such as switches, actuators and sensors, considerably
simplifying product development.
Applications
• Robust and secure low power wireless applications
• ZigBee PRO networks
• Home and commercial building automation
• Home networks
• Toys and gaming peripherals
• Industrial systems
• Telemetry and utilities
(e.g. AMR)