User Manual
“Music is a higher revelation than philosophy.” GETTING STARTED ludwig van beethoven Welcome Thank you for choosing XtremeMac’s AirPlay Boost. AirPlay Boost is an FM transmitter designed to work seamlessly with your iPod. The external antenna helps “boost” the transmission signal. With the on-screen display and three simple buttons, you can play music from your iPod clearly and wirelessly on any FM stereo. Step 1 – Tune your FM stereo Find a station that has only static – no talk or music.
FM stereo. The left button “<” tunes down the frequency and the right button “>” tunes up the frequency. The frequency will be displayed on the iPod screen. Once the frequency on the iPod matches the one on your FM radio, press play on your iPod and AirPlay Boost you will begin transmitting your music to your FM radio. SELECTING A PRESET: Step 4 – Programming Preset Stations Tune AirPlay Boost to station you want to save. Hold the button until the screen shows the preset numbers.
SELECTING STEREO/MONO MODE AirPlay Boost allows you to select between stereo and mono mode so that you can select the strongest, clearest signal. Mono mode may work better in crowded radio markets. Step 1 – Press the and the menu screen will appear. The second item in the menu is “AUDIO”. Step 2 – Use the arrow keys to move through the menu options. Highlight the “AUDIO” menu item and press the to select. Step 3 – Use the arrow keys to toggle between “STEREO” and “MONO” modes. Push the to select.
Warranty What Does The Warranty Cover?: XtremeMac warrants that its products shall be free from defects in materials or workmanship, with the exceptions stated below. What Is The Period Of Coverage?: This warranty runs for one year from the date of purchase. What Does The Warranty Not Cover?: This warranty does not cover any defect, malfunction or failure that occurs as a result of: misuse or failure to follow the product directions; abuse; or use with improper, unintended or faulty equipment.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.