Quick Start Guide
1
LOGO(METASEE)
1080P Full HD Projector
Versatile Smart Projector
Quick Start Guide
P1
Important Safety Instructions
Please read and understand all instructions before using the projector.
Do not change any settings not described in this manual.
If physical injury, data loss, or damage is caused by failure to follow the instructions,
the warranty does not apply.
Setup
①To reduce the risk of fire and/or electric shock, do not expose the projector to rain
or moisture, or objects filled with liquids, such as vases, should not be placed on it.
②Do not place the projector in areas susceptible to excessive dust and dirt or near
any appliance generating a strong magnetic field.
③To prevent overheating, do not block the ventilation openings. Do not place the
projector on the soft surface, such as sofa, pillow, to avoid blocking the cooling inlets.
④Do not place the projector in a confined space and always leave enough space
for ventilation around it.
⑤Please protect the projector from direct sunlight heat, large temperature
fluctuations and humidity.
⑥When the projector is running for a long time and the surface becomes too hot,
turn it off and unplug the power cord. Please wait for the projector to cool down
before resuming operation.
⑦Please handle the projector with care and avoid touching the lens.
⑧Do not place heavy or sharp objects on the projector.
⑨Do not disassemble to avoid electric shock.
⑩Please use the attachments or accessories specified by the manufacturer.
⑪Do not vibrate violently to avoid damage to internal components.
⑫Do not allow children to handle the projector without supervision.
⑬In the following conditions, a layer of moisture may appear inside the projector