Doc No: WG6611-00-DTS-D08 Index 1. HISTORY CHANGE ....................................................................................................................... 2 2. GENERAL DESCRIPTION ........................................................................................................... 3 3. FUNCTIONAL FEATURES ........................................................................................................... 4 3.1. MODULE BLOCK DIAGRAM ..............................................
Doc No: WG6611-00-DTS-D08 1. HISTORY CHANGE Revision D0.1 D0.2 Date 2016-01-13 2016-02-26 Description Initial Document creation. Verify Current Consumption D0.3 D0.4 2016-03-08 2016-03-17 D0.5 2016-06-21 Verify Application Reference Circuit Modify Functional Specification remove Certification 1. Modify Functional Specification increased IPEX Connector 2. Cover modify Series Specifications 3. Modify Module Block Diagram D0.6 2016-09-20 1. Modify Application Reference Circuit 2.
Doc No: WG6611-00-DTS-D08 2. GENERAL DESCRIPTION WG6611-00 is a single chip wireless Internet-of-Things module. The advance Realtek RTL8711AM is a highly integrated single-chip low power 802.11n Wireless LAN (WLAN) network controller. It combines an ARM-Cortex M3 MCU, WLAN MAC, a 1T1R capable WLAN baseband, and RF in a single chip. It also provides a bunch of configurable GPIOs which are configured as digital peripherals for different applications and control usage.
Doc No: WG6611-00-DTS-D08 3. FUNCTIONAL FEATURES 3.1. Module Block Diagram Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.
Doc No: WG6611-00-DTS-D08 3.2. Pin Assignment (Top view) Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.
Doc No: WG6611-00-DTS-D08 3.3. Pin Description Pin# Name Description Type 1 GND Ground G 2 GND Ground G 3 NC Not Connected is not used N 4 NC Not Connected is not used N 5 NC Not Connected is not used N 6 NC Not Connected is not used N 7 VDDIO(1.8~3.
33 GND Doc No: WG6611-00-DTS-D08 Ground 34 VD33 3.
Wireless Security Channel Doc No: WG6611-00-DTS-D08 WPAK2-AES(802.11i(WPA,WP2)) OPEN,shared key,and pair-wise key authentication services Channel 1~14 802.11b(DSSS): CCK(11, 5.5Mbps), DQPSK(2Mbps), DBPSK(1Mbps); Modulation 802.11g(OFDM): BPSK(9,6Mbps), QPSK(18,12Mbps), 16QAM(36,24Mbps), 64QAM(54,48Mbps); 802.11n(OFDM): BPSK, QPSK, 16QAM, 64QAM(150Mbps) 150Mbps: Typical - 64dBm @ 10% PER Sensitivity 54Mbps: Typical - 65dBm @ 10% PER 11Mbps: Typical - 76dBm @ 8% PER 11Mbps: 802.
Doc No: WG6611-00-DTS-D08 Support DMA to offload CPU bandwidth. 1 very high speed SPI with baud rate up to 41 MHz. 1 high speed SPI with baud rate up to 10MHz). PWM x4 (PWM with configurable duration and duty cycle from 0 ~ 100%) GPIO x19 PCM x2 (Master clock output:64,128,256,or 512kHz) ETE x1 Dimensions 22.25 x 19 x2.3mm Table1-Typeical Digital IO DC Parameters(3.3V Case) Symbol Parameter VIH Input-High-Voltage VIL Input-Low-Voltage VOH Output-High-Voltage VOL Output-Low-Voltage Min Typ.
Doc No: WG6611-00-DTS-D08 4.1. Temperature Limit Ratings Parameter Min. Max. Storage Temperature -40 +80 Units ℃ Operating Temperature 0 +70 ℃ 4.2. DC POWER SUPPLY Symbol Parameter Min Typ. Max Units VDD 3.3V Supply Voltage 3.0 3.3 3.6 V VDIO Digital IO Supply Voltage 1.62 1.8~3.3 3.6 V Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.
Doc No: WG6611-00-DTS-D08 4.3. Current Consumption State Current(3.3V) Description Deep Sleep 5.5uA Low Power Timer and GPIO Evnet Wakeup Deep Standby 25uA Low Power Timer and GPIO Evnet Wakeup Sleep 0.5mA Associated with AP but no traffic Associated Idle (DTIM=1) 3.3mA Associated with AP and no traffic Associated Idle (DTIM=2) 2.41mA Associated with AP and no traffic Associated Idle (DTIM=3) 1.
Doc No: WG6611-00-DTS-D08 4.4. WLAN 2.4-GHz RF Performance 2.4G WLAN Transmitter Characteristics 11b Output Power 11g Output Power 11n Output Power Condition Min Typ. 11M CCK 17 1M DSSS 17 54M OFDM 14 6M OFDM 16 MCS7 13 MCS0 15 Max Unit dBm 2.
Doc No: WG6611-00-DTS-D08 4.5. Pin Function Table Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.
Doc No: WG6611-00-DTS-D08 5. REFFERENCE SCHEMATIC 5.1. Application Reference Circuit Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.
Doc No: WG6611-00-DTS-D08 6. PACKAGE INFORMATION 6.1. Module mechanical outline Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.
Doc No: WG6611-00-DTS-D08 Module TOP VIEW Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.
Doc No: WG6611-00-DTS-D08 6.2. Package Marking Data Code: YYWWSSFA YY = Digit of the year, ex: 2012=12 WW = Week (01~52) SS = Serial number from 01~98 match to MFG’s lot number or 99 to repair control code F = Reverse for internal use A = Module version from A to Z Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.
Doc No: WG6611-00-DTS-D08 7. SMT AND BAKING RECOMMENDATION 7.1. Baking Recommendation Baking condition: - Follow MSL Level 4 to do baking process. After bag is opened, devices that will be subjected to reflow solder or other high temperature process must be a) Mounted within 72 hours of factory conditions <30°C/60% RH, or b) Stored at <10% RH. - Devices require bake, before mounting, if Humidity Indicator Card reads >10% If baking is required, Devices may be baked for 8 hrs at 125 °C. 7.2.
Doc No: WG6611-00-DTS-D08 Note: (1) Reflow soldering is recommended two times maximum. (1) Add Nitrogen while Reflow process: SMT solder ability will be better. Stencil thickness: 0.1~ 0.15 mm (Recommended) Soldering paste (without Pb): Recommended SENJU N705-GRN3360-K2-V can get better soldering effects. Copyright © JORJIN TECHNOLOGIES INC. 2017 http://WWW.JORJIN.COM.
Doc No: WG6611-00-DTS-D08 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Doc No: WG6611-00-DTS-D08 This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna, 3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4Gband by supplied firmware programming tool.