Mobile Video Recorder User Manual
Caution 1、Heavy things are not allowed to place on top of the unit 2、Do not touch the machine or power with wet hand. 3、When cleaning, please use soft dry cloth or soft brush, do not use chemical agent. 4、Liquid is not allowed to be splashed on the unit, to avoid fire causing by short-circuit. 5、Turn off the power when not using for a long period of time. Install environment 1. The power supply for the DVR is DC 8-32V, check battery power before use. 2.
Catalog 1 Specifications......................................................................................................................... 4 2 Product external structure and port ........................................................................................ 6 2.1 SD card type front panel appearance and interface........................................................ 6 2.2 AV wiring and ports ..................................................................................................
1 Specifications This device is specially designed high price-quality ratio product for the car mobile video monitoring,It adopts embedded processor and embedded Linux operating system, combines the latest technologies in the IT filed such as H.264 audio and video compression/decompression technologies. Its structure adopts special anti-vibration technology. The product has good shock resistance, heat resistance and stability; it can be widely applied to various types of vehicles.
Sensor Sensor port Internal ACC port G-Sensor Software PC playback Playback on PC terminal,analysis the vehicle information on the files. SW upgrade Upgrade files Support through U disk upgrade / online remote upgrade Basic specifications: Item Parameters Remark Power in 8—36V Input operating voltage: +8V~+36V,<8V or >36V for long time,it auto shut-off for protection. Power out 12V Output voltage 12V(±0.2V),Max current 2A ≤4V Key off. ≥5V Key on.
2 Product external structure and port 2.1 SD card type front panel appearance and interface 2.
2.3 Power cable and extension cable Yellow line to power (ACC) Black line to power Red line to ignition switch + 2.4 I/O Alarm input/output There are 4 alarm input and 1 alarm output port on the device. Alarm inputs are all level detection, can be connected to vehicle status outputs, such as reverse or steering horn. Brake detect drawing is as follows, when the brake pad is stepped on, MDVR will detect high level, otherwise low level is detected. +24V B- light Brk- pad To MDVR sensor input Fig.
3 DVR software operating 3.1 Preview interface After the unit is activated, it shows preview interface, the interface shows device status and all channels working status information, the meaning and content is as follows: 【2015-1-20 09:54:34】 System time 【CHx】 Channel name 【● REC】 Recording 【NO DISK】 Without recording Fig. 3 Preview interface with and without recording 3.2 Soft keyboard input System inputs include digits, En character and Chinese letter, Pining input method for Chinese.
Fig. 4 Input method 3.3 Enter to menu mode Plug mouse cursor into the USB slot on front panel, right click on mouse to enter to system menu. Click right key on mouse, system require input device No. and password, then input correct No. and password, the click OK. (If the password management is not set, normally no password is required to input.) Fig.5 the right mouse button menu Press menu and enter to main menu. 3.
Fig.6 Main menu All the menu items refer to the following functions: : Search HDD/SD card storage files for playback operation.
3.5 Video search Fig. 7 Video search ·There are 3 search modes: fast precise timing location, time period recording status browse and detail video files browse for selection.
Operation: 1. Enter to video search interface, the default is search files from current time directly, then you can browse or playback video files. 2. Fast precise timing search mode: Input recording date and time (Default is the last minute enter to search interface) Video status is labeled with color, red is for the alarmed recording, green is for normal recording time period, without color is for the time period without recording.
The detail files are arranged refer to channel order, video time order for easy searching. Fig. 9 Backup interface 1、 Backup files are stored under U-disk/SD card root catalog /Recordfile/. 2、 During backup, it will pop up status window to show backup progress. 3、 After backup, pull out the backup device directly. 4、 If the volume of backup device is smaller than video file size, it will prompt “Space low”.
Fig. 10 Single screen playback 1. Play mode: single screen playback mode 2. Playing mode control including: Select normal playing, single frame playing, slow playing, fast forward and reverse. Adjust audio volume.
Fig.
3.6 Recording setting 3.6.1 Frame rate dynamic setting Fig.12 Recording setting interface Recording setting interface allow to set the AV parameters for all channel and video working mode. Details include recording switch to all channel, resolution, bit rate, frame rate, picture quality and audio recording switch. Video pack time and video modes are as follows: 1./
video setting interface. 5.
normal recording, 0:00~8:00、17:00~23:00 for alarm setting,Step as follows: Select all. Recording mode select alarm recording, the related box will appear one “√”. Move cursor to week (Sunday) timing column, click all box from 0~8 and 17~23 timing period,box turns red. Select week (Sunday) setting to all, click copy button, complete the setting from week(Sunday), (Monday), (Tuesday),(Wednesday)…to (Friday) Recording mode select normal recording, the related box will appear one “√”.
3.6.3 Small bit stream configuration Fig. 15 Page of small bit-stream setting This item is for 3G transfer setting, currently support D1 and CIF two resolution, bit rate and frame rate, picture quality dynamic adjustable.
3.7 Function setting Fig. 16 Function setting interface All items related to the following configurations: :Set all parameters and switches of alarm input, actions for alarm disposal, alarm output parameter, EMAIL setting, camera shelter alarm setting, mobile detecting setting. :Set platform parameters
3.7.1 Alarm setting Fig.17 Alarm setting page Remark: 1. I / O port for alarm input 1-4, refer to chapter 2.2 back panel appearance and sockets. There 3 options for setting trigger level: High: Trigger high level alarm. Low: Trigger low level alarm. Shut-off: Without alarm 2、HDD failure alarm setting, HDD low space setting: Disc failure alarm:Alarm when there is no HDD or HDD unable to define. Disc space low alarm:Alarm when there is no space for recording.
Pre-recording:Pre-recording timing setting when alarm triggered. 3.7.2 Time setting Fig. 18 System time modification& summer time setting 1、Time setting interface is used for setting of system time, details as follows: :Setting of year/month/date :Select MM/DD/YY、YY-MM-DD。 :Set hour/minute/seconds
to the third Friday of October. User also can define the summer time range. 3、GPS auto time check: a) 《GPS time check》Click will be the time check refer to current GPS info. b) 《Auto time check》Please do not check this, or it will be China time, 3.7.3 Management of storage device Fig. 19 Interface of storage device management 1、Display storage device status, volume size, space available, left time for recording. 2、Auto recovery the first recording file when the storage device space is full.
3.7.4 Device maintenance and system upgrade Fig. 20 System maintenance interface Function; 1 、 : Select open/close. If close is selected, the auto maintenance function will not be activated. If select open, it will activate auto maintenance function refer to setting time table, it is used for protected re-start on the device.
press and hold power key on remote controller it will re-start the system. System Upgrade 1、 Copy the files to catalog update dvr in U-disk or SD-card. 2、 Insert U disk/SD card into device. 3、 Click system upgrade on the system maintenance interface. 4、 The system will auto scan specific files under catalog updatedvr in the U-disk or SD-card, then auto upgrade the system.
4、Camera type: SD AHD with two options, SD represents the common analog camera AHD million high-definition camera, respectively 1-2 channel, 3-4 channel, 5、Language setting as follows Fig. 22 System setting Remark: After setting is modified, after saved it will auto start. 3.8 System info.
3.9 Vehicle info. Fig. 24 Vehicle information setting All function items defined as follows: 1、 :Set device No., Vehicle No; 2、 :Set speed.; 3、 :Set acceleration 4、 :Set temperature; 5、 :Set auto/timing/delay on/off. 6、 :USELESS for this MDVR; 7、 :USELESS for this MDVR; 8、 :USELESS for this MDVR.
3.9.1 Basic info. Fig. 25 vehicle basic info. 1、Vehicle No:Set unit No., connect to server, cannot be changed. 2、Company name:Set company name using this device. 3、Vehicle license No:Set vehicle license No., the No. will be added on the video file. 4、Driver name:Set driver name; 5、Route No:Set route No. 3.9.
Remark: Before set for acceleration, check first, when enable select is activated, if it exceeds limits it will trigger alarm, at the same time if recording is opened it will start to record. Press direction key to move cursor to X enable, then press to implement open/close enable, press right key then press , press digits key to set for the gate limits, press right then press to implement open/close setting. 3.9.4 Temperature setting Select refer to Model.
Fig. 28 Ignition mode select and on/off setting Remark: 1、On/Off mode: Ignition mode and timing mode, on-off mode select ENTER to switch, the default is ignition mode. (Ignition mode is DRV is on after vehicle is started, timing mode is on/off time is setting by user).
3.9.6 Display setting 3. Fig 30 Display setting 1、 Channel name:Channel name modify; 2、 Name position:Set name on preview page position; 3、 Color set:Set channel color and contrast(Remote controller +/- key); Fig. 31 Color setting 4、 Preview switch:Set if the real time preview picture is to be displayed or not, open for display. 5、 Preview timing:Set if the time will be display when preview. 6、 Video time added:Set if video time is to be superposed.
Fig. 32 Volume adjust 3. 9.7 Password management Fig 33 Set password Remark: Set if the password is to be used:Password switch.. When the password switch is opened, the user need to set 6 character passwords for administrator or normal user. 1、Administrator level:Have privilege for all operation. 2、Normal user level:Only have operation on picture monitoring, video inquiry and video playback.
4 Help Wiring Video PC Playback Player For any questions, please contact us for help. EMAIL: greentechjoinlgo@gmail.