Mobile DVR Instructions 1
Contents Mobile DVR ............................................................................................................................ 1 Contents................................................................................................................................... 2 1 Specification.......................................................................................................................... 3 2.Feature .........................................................................
1 Specification FEATURES: Built-in high performance Hisilicon chipsets, coded with H.264 standard, high compression rate and image quality 4CH AV Inputs with AHD 1080p/720P/960H/D1/CIF optional, 1CH synchronized AV output, 1CH VGA output, 1CH HDMI output.
Recording & Playback Firmware upgrading Interface Function extention Audio Compression G.
≤4V Key off。 ≥5V Key on。 Video Input(Ω) 75Ω 75Ω/CH。 Video Output 2Vp-p 0—4V One 2Vp-p CVBS One 75Ω Low voltage alarm >4V High voltage alarm SD Card Slot SD Card Support SD Card up to 1TB, Support two SD Card Support upgrade MDVR software Temperature -40℃-80℃ -40℃-80℃ with good environment Key Signal I/O 2.Feature 2.1Remote control application Key Function: 1.”Info”: view network status 2.”Login”: main menu 3.
2.2 MDVR interface 1、12V:For camera and voice record,2、Negative,3、AIN: For Audio;4、VIN:For Video Picture.4 MDVR interface Back Panel Back Panel Interface Power Video/Audio input item DC8-36V Feature Power input(red for positive,black is for negative, yellow is connect to ignition cable, when switch mode set up in ignition mode) CAM1-4 (AV1-AV4) Video/Audio Input interface Video output Audio output VOUT AOUT Video output Audio output IO/ALARM IO/ALARM IO/ALARM USB USB Mouse, USB Disk 3.
Make sure the volt is 8-36V before you connect with the battery , or the MDVR will be burn up Yellow cable must to connect with the ACC , or the DMVR cannot be delay shut down, the video will be lose. 4 System User login After connect the power, press “Login” to login without password. (There is no password before you setup). USER account cannot change settings. Only ADMIN account can change menu. Picture.
5 Main Menu Picture 7 Main Menu < SEARCH>: Search for video files stored in the hard disk/SD card and perform playback operations; :Set the audio and video parameters, working mode, etc.; :Set alarms, ptz, time, network, disk, system, etc.; :Display device serial number, version number, SIM card, GPS module, etc.; :Set vehicle number, switch settings, wireless settings, etc.
5.1 Record Search Picture.8 Record Search Record Search: Search, playback, and backup of video files on disk. It cannot Fast forward and rewind when playback on MDVR. 5.2 Record Setup Picture.
: You can select on/off to select whether the channel is recording; : D1 / HD1 / CIF / 720P / 1080N / 1080P resolution optional; : High / medium / low optional; : 1 to 25 (or 30) optional; : 1 to 6 optional; the smaller the value, the better the image quality;
5.3.1 Alarm Setup Picture.11 Alarm Setup : Select interface; : High and low optional; : “YES/NO”: switch or not when level is triggered; : Alarm when there is no disk or the device does not recognize the disk; : Alarm when the disk is out of memory;
5.3.2 PTZ Setup Picture.12 PTZ Setup : Support PELCO-D and PELCO-P; : 1200/2400/4800/9600 bps optional; : 5,6,7,8 optional; : Odd/Even/Mark/Spac/None optional; : 1/1.5/2 optional; : 001~255. 5.3.
Picture.13 Time Setup : Set year, month, day;
5.3.5 System Maintain Pictures.15 System Maintain : 1. Copy the files to be upgraded to the update DVR directory of the SD card. 2. Insert the SD card into the device. 3. Click the button. 5.3.
Picture.16 Network Setup : Generally not modified : Generally not modified : Set the server IP address, port Picture.17 CMS Setup : select ”IP Address” :47.106.9.69 (Configure according to your own server IP) NOTE: 47.106.9.69 is IP of our free server. When you setup your own server, change the IP to the IP of your own server. 5.3.7 System Setup Picture.
5.5 Vehicle Info Picture .20 Vehicle Info 5.5.1 Basic Setup Picture.21 Basic Setup
setting). PLEASE DO NOT CHANGE UNLESS USE YOUR OWN SERVER. : Enter your company’s name; : Enter license number of the car; : Enter driver’s name; : Enter line number. 5.5.2 ACC Setup Picture.
5.5.3 ON/OFF Setup Pictures.23 ON/OFF Setup :Ignition Mode / Timing Mode(In the ignition mode, the MDVR will automatically turn on after the car is started, and in the timing mode, the MDVR will be turned on at the time set by the user.) :1~1440 minutes (Effective after restarting) :1~1440 minutes (Effective after restarting) Pictures.
5.5.4 Wireless Setup Picture.25 Wireless Setup : When the module cannot be reconnected after disconnection, the module will automatically power off and reset. APN: Please input according to the 4G SIM card you use. 5.5.5 GPS Setup Picture.
: Above the set speed, the device will alarm : Below the set speed, the device will alarm 5.6 Display Setup Picture.28 Display Setup : Flip the video image horizontally
5.7 Password Setup Picture.29 Password Setup Only “Admin” can set “Admin Password” and “User Password” 6 I/O Interface Picture.
① Alarm-2 ② Alarm-4 ③Alarm Output ④ 485B ⑤ Alarm-1 ⑥ Alarm-3 ⑦GND ⑧ 485A There is 4 alarm input,2 alarm output. Alarm input detection are voltage; can be accessed by variety of vehicles driving status, such as brakes, steering ,horn and so on. Brake testing schematic shown below, when the brake pedal is depressed, MDVR able to detect high or low voltage. Picture.31 Brake testing schematic Alarm outputs are voltage output.
Picture.33 Check Networking(Online) Status Press the button “Info” on remote control, will be showed the online information. GPS:YES means recognize the GPS module; GPS:NO means not recognize GPS module LNG:11349.71392 E Display longitude, 0.0 means GPS not working LAT:2236.43040 N Display latitude, 0.