ROUTE NAVIGATION FISHFINDER OPERATIONS CREATE A ROUTE 1. In a Chart View, use the 4-WAY Cursor Control key to select a Waypoint, Spot-Lock, or position on the chart view. 2. Press the GOTO key. 3. To add more Waypoints to the Route, repeat steps 1 and 2. NOTE: If the position you select is also a Contour Line, a submenu will open with additional related menu options. To add the position to the Route, select Go to Position. SAVE the current route 1. From a Chart View, press the MENU key once. 2.
AUTOPILOT How AUTO P I LOT Wo rks Two different versions of AutoPilot are available Advanced AutoPilot and Legacy AutoPilot. There are distinct differences between the two AutoPilots and how they control your boat. Advanced AutoPilot Advanced AutoPilot not only uses compass heading but also GPS signal data to correct for cross winds, current and other external forces to keep the boat on a straight line.
AUTOPILOT minnkot amot or s.
AUTOPILOT 76 minnkot amot or s.
AUTOPILOT REMOTE OPERATIONS Se le ctin g Auto P i lot M o des The user can choose between Advanced AutoPilot and Legacy AutoPilot either from the remote or from the Humminbird. From the Remote: Home>Controls Softkey>AutoPilot Mode ENGAGING AUTOPILOT 1. To engage AutoPilot, press the AutoPilot key 2. To adjust the desired heading, use the steering keys . to point the motor in the new direction and Link will lock onto the new heading. DISENGAGING AUTOPILOT 1.
AUTOPILOT FISHFINDER OPERATIONS From the Humminbird: start LEGACY autopilot towards the cursor position Use the cursor to set the heading for Legacy AutoPilot navigation. i-Pilot Link will start navigation and maintain a constant heading towards the cursor position. 1. Use the 4-WAY Cursor Control key to move the cursor to a position on the chart. 2. Navigation X-Press Menu: Press the MENU key. 3. Select Legacy AutoPilot and press the RIGHT Cursor key.
AUTOPILOT FISHFINDER OPERATIONS Adusting the Legacy Autopilot Heading Adjustment Preview Line (green) The Heading Line can be turned on or off. (Navigation X-Press Menu > Legacy AutoPilot HDG) Autopilot Icon indicates Legacy Autopilot is active Adjust Heading Confirm Display or hide the heading line 1. Main Menu: Press the MENU key twice. 2. Select the Accessories tab > i-Pilot Link > Heading Line 3. Press the RIGHT or LEFT Cursor keys to select On or Off (Default = On). minnkot amot or s.
CRUISE CONTROL H ow CRU I SE CON TROL Wo rks i-Pilot Link’s Cruise Control automatically sets the prop speed to maintain constant GPS speed. Because this controls only the prop speed, Cruise Control can be used in conjunction AutoPilot and iTrack Record as well as with navigating iTracks, LakeMaster contour lines, routes and Waypoints. Cruise Control is interfaced only through the remote. Caution: When Cruise Control is engaged, the prop will automatically be enabled if it is not already enabled.
CRUISE CONTROL REMOTE OPERATIONS 12:13 PM OCT 18 PROP 12 5/ SPEED 2 DEPTH 1 ft .3 BEAR ING 273° Settings TARG E T 0 .0 D ISTANCE 114 ft Controls Engaging Cruise Control 1. Press to bring up the Cruise Control panel. 2. Using and , adjust the Target Speed and press OK to accept the Target Speed and engage Cruise Control. Disengage Cruise Control 1. Press to bring up the Cruise Control panel. 2. Press the Cancel Softkey. Adjusting Target Speed with Cruise Control Engaged 1.
Fr e qu e nt ly A s k e d Q u es ti o n s Q. Does i-Pilot Link record the speed I am traveling when recording a iTrack? A. No. i-Pilot Link only records its location during track record. It is up to the user to set the desired speed manually or with Cruise Control. Q. Why doesn’t my GPS Signal Strength icon always show all four bars? A.
Q. Does i-Pilot Link help to keep the coil cord from wrapping around the motor shaft? A. Yes and no. When in Spot-Lock, i-Pilot Link keeps track of how far it has rotated in either direction. If a new correction will cause the coil cord to wrap, it will rotate in the opposite direction in order to prevent the wrapping. In all other modes, it is up to the user to monitor the coil cord and to rotate the motor accordingly to avoid wrapping. Q. Does my i-Pilot remote work with i-Pilot Link? A. No Q.
T rou bl e s h ooti n g General Troubleshooting Problem: The motor is making erratic steering corrections while in AutoPilot, Spot-Lock or Track to Start/End. Solution: Be sure to keep all ferrous metallic objects away from the i-Pilot Link controller as they will have an impact on the built-in compass. Such objects include: anchors, metal framework, etc. Problem: When a key on the remote is pressed the motor doesn’t always respond. Solutions: Check the status of the battery charge icon on the remote.
Spot-Lock Problem: The boat doesn’t seem to keep close enough to the recorded Spot-Lock location. Solution: Verify the trolling motor batteries are sufficiently charged Solution: Check for weeds on the prop. Solution: In more extreme wind and current conditions, the boat will tend to stabilize a little ways down wind from the intended location. Relock the location the same distance upwind and expect that the boat will drift some in the downwind direction.
Glossa ry Accessory Connector: The accessory connector is a small sealed connector used on the Terrova and Riptide ST family of motors. This connector allows for easy waterproof installation of any Minn Kota Terrova and Riptide ST accessories. Center Housing: A plastic center housing exists in the center of the trolling motor mount. This center housing covers and protects mechanical and electrical components from the environment.
COMPL I A N CE S TATE M EN TS ENVIRONMENTAL COMPLIANCE STATEMENT: It is the intention of Johnson Outdoors Inc. to be a responsible corporate citizen, operating in compliance with known and applicable environmental regulations and a good neighbor in the communities where we make or sell our products. WEEE Directive: EU Directive 2002/96/EC “Waste of Electrical and Electronic Equipment Directive (WEEE)” impacts most distributors, sellers and manufacturers of consumer electronics in the European Union.
The i-Pilot installation will require permanently removing the motor control box cover. This cover includes information about your motor that may be needed for future service work or when ordering replacement parts. Please note the information from your motor in the space provided below. Motor model (circle one) Terrova, ST, PowerDrive V2 or SP Auto Pilot (Yes or No)_____________________________________ Motor thust (55lb, 70lb, etc)________________________________ n ote s 88 minnkot amot or s.
n ote s minnkot amot or s.
Minn Kota and i-Pilot Link are registered trademarks of Johnson Outdoors Marine Electronics, Inc. minnkotamotors.com minn kota conSumer & technicaL Service P.O.