Re: Certification for JCI CB2BLUECON Transmitter Model: CB2BLUECON FCC ID: CB2BLUECON IC: 279B-BLUECON USER'S MANUAL INFORMATION (PRELIMINARY) The User's Manual is in preparation. The following material will be contained in the manual: FCC ID: CB2BLUECON IC: 279B-BLUECON This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Honda Hands-Free Telephone Module Interface JCI-Suggested User Guide Text User Guide CT-ELE-003-Preliminary (4.0) Draft Copy Johnson Controls, Inc. Automotive Systems Group Interiors Electronics One Prince Center Holland, MI 49423 Note: This document is a Johnson Controls, Inc. confidential document. Disclosure must be controlled by the recipient.
Copyright Notice This manual is the property of Johnson Controls Incorporated and is for the exclusive use of its employees or assignees. Its contents are not to be disclosed to outside parties without the permission of Johnson Controls Incorporated. No part of this manual may be reproduced in any form whatsoever, without the permission of Johnson Controls Incorporated. Note: This document is a Johnson Controls Incorporated confidential document. Disclosure must be controlled by the recipient.
Revisions (Continued…) Version Preliminary Date Description June 25, 2003 Added "BLUECONN" to FCC label in back of document. Draft Copy Johnson Controls, Inc.
Table of Contents Learning About the HFTM .......................................................................1 Precautions...........................................................................................1 Introduction ...........................................................................................1 Helpful Hints .........................................................................................4 Using the HFTM Buttons ...........................................................
Locking the System .......................................................................13 Unlocking the System ....................................................................13 Using the Phone .................................................................................... 14 Pairing/Unpairing a Phone ..................................................................14 Pairing a Phone to the HFTM System............................................14 Unpairing a Phone from the HFTM System ........
Table of Figures Figure 1. Voice Prompts 1........................................................................... 2 Figure 2. Voice Prompts 2...........................................................................
Learning About the HFTM Precautions WARNING When preparing to set up the HFTM or when adjusting its operation, be sure the vehicle is in PARK with the engine turned OFF and the key in the ACCESSORY position.
Figure 1 and Figure 2 list the HFTM voice prompts. They are color coded to match their location in this guide. The colors match the sections of the manual that discuss these operations. Call/Dial Security Voicetag Unlock Number Lock Redial Set Passcode Phonebook Store Voicetag Edit Voicetag Draft Copy Delete Voicetag List Voicetag Figure 1.
Phone Options During an Active Phone Call Pair Transfer List Voicetag Mute Status Unmute Delete Voicetag Send Tones Edit Voicetag Name System Number Help Prompt Gender Go Back Clear System Cancel Draft Copy Figure 2.
Helpful Hints Using the HFTM Buttons The following table explains button operation. Button Mode When in Command Tree During an Active Call Press Terminates Prompt and Activates Speech Recognition Activates Answers the Speech Call Recognition Answers the Second Call Swaps Between Calls Press and Answers "Yes" to a Verbally Hold No Function No Function Prompted ( ≥ 1.
be "Peter is stored" and "Returning to the main menu." The next time the pickup button is pushed, you will be at the main menu. G. Say "Help" at any time to hear a list of available options. H. Entering a string of numbers can be accomplished by saying all the numbers at once, or by separating the string into blocks. The system will say the recognized numbers after each block. Say "Go back" to remove the last block entered. Say "Verify Number" to hear all numbers entered.. I.
Cancel Use the Cancel command to stop an operation. Cancel STEP CANCEL 1 Press the pickup button and say "Cancel" at any time. 2 Speech recognition is terminated and radio operation continues. The system will begin from the main menu the next time speech recognition is activated. Using the HFTM System Using the Phonebook Storing a Name Tag with Number STEP 1 STORING A NAME TAG WITH NUMBER Press the pickup button and say "Phonebook". You are given a choice of options.
Editing the Number for a Current Phonebook Entry The HFTM can store 50 name tags. STEP 1 EDITING THE NUMBER FOR A CURRENT PHONEBOOK ENTRY Press the pickup button and say "Phonebook". 2 Say "Edit". You are asked what name you want to edit. 3 Say a name such as "Rich" or say "List" ("List" reads a list of phonebook entries from which you can select the one you want to edit). HFTM tells the current number for Rich. It then asks what the new number is.
Listing all Entries in the Phonebook Listing all Phonebook Entries STEP 1 LISTING ALL ENTRIES IN THE PHONEBOOK Press the pickup button and say "Phonebook". You are given a choice of options. 2 Say "List". Starts at beginning and reads you the entire list (or tells you if it is empty). It then returns to the main menu. The list is read in the order the numbers were put in the phonebook. See the next section (Navigating the Phonebook) for directions to move through a long phonebook list.
Editing List Entries in the Phonebook STEP 1 EDITING LIST ENTRIES IN THE PHONEBOOK Press the pickup button and say "Phonebook". You are given a choice of options. Say "List". The list is read in the order the numbers were put in the phonebook. (See Navigating the Phonebook to hear the list in a different order.) 3 When you hear the list name you want to edit, say "Edit" to edit that number. The current number for that list name is given. You are asked for the new number.
Setup Listing Paired Phones Listing Paired Phones Follow these instructions to hear a list of the phones paired with the HFTM module. STEP 1 LISTING PAIRED PHONES Press the pickup button and say "Phone Options". The system prompts you with available options. 2 Say "List". 4 The system lists the names of all the cellular phones that are currently paired with the HFTM module. 5 The HFTM then says that the entire list has been read and then returns to the main menu.
Renaming a Paired Phone if You Don't Know its Name STEP Press the pickup button and say "Phone Options". The system lists the phones paired to your HFTM. 2 Say "List". The system lists the phones paired to your HFTM. 3 When you hear the phone you want to rename (such as "Dave's Phone"), say "Edit". 4 You are then asked for the new name for this phone. Say the "New Name" for this phone. 5 The HFTM tells you the phone name has been changed and returns you to the main menu.
Setting the Gender of Voice Prompts STEP Setting Voice Prompt Gener 1 SETTING THE GENDER OF VOICE PROMPTS Press the pickup button and say "System". The system prompts you with available options. 2 Say "Prompts". The system asks if you would like male or female prompts. 3 Say "Male" or "Female". The gender of the prompts is changed to what you chose and you are returned to the main menu. Using the Security System The HFTM's security system does more than just lock the phonebook.
NOTE To lock the system, a passcode must be set. STEP 1 Locking the System Locking the System LOCKING THE SYSTEM Press the pickup button and say "Security". The system prompts you with available options. 2 Say "Lock". The system says it is locked, beeps twice, and locks itself. Unlocking the System UNLOCKING SYSTEM 1 When you try to use a locked system (like pressing a button), the system informs you that the system is locked and that you must say the 4-digit passcode to continue.
Using the Phone Pairing/Unpairing a Phone Pairing a Phone to the HFTM System To use your HFTM, you must first pair it (register the system with the phone) with a Bluetooth hands-freeprofile-enabled cellular phone. Please refer to your phone manufacturer's owner's manual for instructions on how to place your cellular phone into pairing mode. The pairing process requires operation of your mobile phone. For safety, only perform while the vehicle is stopped.
STEP 7 PAIRING A PHONE TO THE HFTM SYSTEM (Continued) Pairing a Phone Press the phone's down button once until you see "Search for audio accessories". Press the Select button. The phone tells you it is searching. 8 The "Devices Found" screen appears (a small car with the words "BLUConnect" next to it). Press the Select button. The words "Connecting to…" are displayed. 9 When the phone's screen displays "Enter passcode: ", enter the same passcode you used for the HFTM on the phone's keyboard.
STEP UNPAIRING A PHONE USING "LIST" (Continued) 3 When you hear the phone you want to delete (such as "Dave's Phone"), press the pickup button and say "Delete". 4 The system asks you if you want to delete "Dave's Phone". Say "Yes" to delete the phone. (Say "No" to leave it paired and to return to the main menu). Unpairing a Phone 5 The HFTM says it is preparing to delete this phone. If you want to delete it, say "OK" (say "Cancel" if you change your mind.
Making Calls STEP 1 MAKING CALLS BY ENTERING NUMBERS IN SINGLE STRING FORMAT WITH THE "CALL/DIAL" COMMAND Press the pickup button and say "Call" or "Dial". You are asked what name or number you want to call. 2 Say the number such as "6165555555" (a continuous number string). The number is repeated to you. 3 Press and hold the pickup button for 1.2 seconds. Choice Or, say "Call" or "Dial".
Making a Call Using Name Tags Making Calls with a Name Tag STEP 1 MAKING A CALL USING NAME TAGS Press the pickup button and say "Call" or "Dial". You are asked what name or number you want to call. 2 Say the name of a person you want to call (a name you programmed into the phonebook list). Choice Or, say "List". You are asked if you want to call this person. 3 Press and hold the pickup button for 1.2 seconds. Choice Or, say "Call" or "Dial" to make the call.
Muting Calls Muting a Call NOTE STEP 1 MUTING A CALL During a phone conversation, press the pickup button and say "Mute". The HFTM tells you it is muting the call. 2 The call is muted. Muting a Call Call muting is available only during an active call. It prevents the person on the other end of the line from hearing you (and from hearing the other people in your vehicle). You can still hear them. Unmuting a Call Call muting is available only during an active call.
Sending Tones with a Stored Name Tag Sending Tones Instead of having to read a credit card number or calling card number to the HFTM, you can store that number as a name tag. This function assumes that you have first stored the number as a nametag. See Storing a Name Tag with Number. STEP 1 SENDING TONES WITH A STORED NAME TAG During the present call, say the name of the name tag you want to send tones for. Press pickup button. 2 Then say "Call" or "Dial" or "Enter". You will hear the tones being sent.
Quick Reference This Quick Reference shows "at-a-glance" how to perform HFTM operations. If you need more information, refer to the given page. NOTE Remember to press the pickup button before speaking. Do this… Page Terminating a voice prompt Press the pickup button. 4 Going back in a command process Say "Go back". 4 Canceling an operation Say "Cancel" or push the hangup button. 4 Getting Help Say "Help" at any time. 5 Storing a name tag Say "Phonebook, Store".
Quick Reference Operation Do this… Listing paired phones Say "Phone Options, List". The HFTM lists all phones paired to it. 10 Editing a name in the phone list Say "Phone Options, List". When you hear the phone you want to edit, say "Edit". Say the phone's new name when prompted. 10 Renaming a known phone Say "Phone Options, Edit". When prompted, say the name of the phone you want to edit. When prompted, say the new name for this phone. 10 Renaming an unknown phone Say "Phone Options, List".
Do this… Requesting paired phone status Say "Phone, Status". 16 Making calls with a single string Say "Call" or "Dial". When asked, say the number you want to call as a single string (like "6163941234"). After the number is repeated to you, say "Call" or "Dial". 17 Making calls with block format Say "Call" or "Dial". When asked what name or number you want to call, say the number in blocks like "616 394 1234". After you say a block, the HFTM repeats the numbers in that block.
Index 4 P 4-digit passcode for clearing system................ 11 4-digit passcode for locking system............12, 13 4-digit passcode for pairing ............................. 14 4-digit passcode for unlocking system........12, 13 Block format.........................................5, 6, 7, 17 Bluetooth what is it?....................................................... 1 Buttons hangup button ................................................ 4 holding them pressed .....................................
"Enter".................................. 6, 7, 9, 12, 14, 20 "Female".......................................................12 "Go back" ...................................................4, 5 "Go Back" ......................................................5 "Help".............................................................5 "List" .............................. 7, 8, 9, 10, 11, 15, 18 "Lock" ..........................................................13 "Male" ..............................................
This device complies with FCC rules part 15. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference that may be received including interference that may cause undesired operation. WARNING: The transmitter has been tested and complies with FCC and IC rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device.