GIGA one ultra Instruction Manual
�� �� ���� ��� ���� ���� �� ���� ���� �� �� ��� ����� ���� ���� 2
GB Content What is GIGA one ultra? 4 General remarks 5 1. First use 7 1. Liability 2. Safety instructions 3. Instructions for use 4. Waste disposal of batteries 5 5 5 6 1.1. Introduction 1.2. Safety instructions for GIGA one ultra 1.3. Scope of delivery 1.4. Charging the battery 1.5. Buttons 1.6. LED Indication 1.7. Connectors (see drawing on page 2) 1.8. Buttons and Switch Description 7 7 8 8 9 9 9 10 2. COPY / DELETE Mode 11 3. Connect to the PC 13 4. Warranty and Service 16 2.
What is GIGA one ultra? GIGA one ultra is one of the smallest & light integrated solution that provides a memory card backup function, a card reader and an external hard disk in one device. As a portable external storage device, GigaOne Ultra is a perfect choice for active mobile photographers providing a very light and optimal solution for storing photos and videos on the integrated HDD.
GB General remarks 1. Liability The manufacturer only guarantees suitability for the original purpose of this product. Furthermore the manufacturer cannot be held responsible for the damage of data. This also includes the loss of data as well as any consequential damage resulting from the use of this product. The manufacturer reserves the right to further develop the product continuously. Any such changes can be made without being directly described in this manual.
- Always pull the mains cable from the socket when there is the danger of lightning or when the drive is not being used for an extended period of time because otherwise the danger of electrical shocks, of fire or of short circuits will increase. - Do not place the drive next to other electrical devices like television sets, radios or loudspeakers as this may impair the functioning of these other devices.
GB 1. First use 1.1. Introduction Many thanks for choosing the JOBO GIGA one ultra. The GIGA ONE ULTRA is the perfect solution if you want to download your data from a memory card the fast way! With the new GIGA ONE ULTRA you can download your data with a copy speed of up to 5,47 MB/sec. while you are still traveling, no matter where you are – and you can do so without a PC! The GIGA ONE ULTRA supports SDHC memory cards as well as all other conventional memory cards such as CF, MS and SD.
1.3. Scope of delivery The package contains the following parts: - JOBO GIGA one ultra - integrated battery - integrated hard disk - AC power adapter - driver CD including software - USB cable - manual - light bag 1.4. Charging the battery The device has an integrated Li-Ion battery with 1300 mAh. Please, charge the battery once completely for 12 hours before the first use by way of the mains adapter supplied with GIGA ONE ULTRA. Only use the original mains adapter that comes with the device for charging.
GB 1.5. Buttons This section gives a briefly overview of the buttons on the GIGA one ultra. Key Activation Operation Select Press & Hold Press & Hold Press once Power On Power Off. Select Copy or Delete mode Press Copy memory card to Hard disk in Copy mode Delete memory card in Delete mode Copy 1.6. LED Indication LED Definition Indication Card access Memory card is accessed HDD access Hard disk is accessed 1.7.
1.8. Buttons and Switch Description Key Activation Operation Mode Description Press Hold USB / Standalone - Press and hold this button for a second to power-up the device. - Press and hold this button for few seconds, release the button to power down the device. Press Standalone - Press this button once to initiate copy in copy mode. The device copies all the content of the memory card to Hard disk. - Press this button once to initiate delete in delete mode.
GB 2. COPY / DELETE Mode 2.1 Copy Memory card to HDD Turn on the GIGA one ultra by pressing the ON button. Now you can insert any of the memory cards to the memory card slot. Then the COPY sign blinks in the display, by pressing the COPY button you initiate the copy process. During copying, the content of the memory card is copying to the hard disk. The ACCESS and HDD LED blink to indicate to user that both media are accessing and copy is in progress.
2.2. Delete Content of Memory Card Turn on the device by pressing the ON button, notice the OK LED lights up. Now you can insert any of the memory cards to the memory card slot. Notice the ACCESS LED blinks to prompt user to press the POWER button again. The display swichtes to the delete mode (DEL) press the copy button for 3 sec. to initiate deleting.
GB 3. Connect to the PC 3.1. Minimum systems requirements - Microsoft Windows TM 98/ Me/ 2000/ XP, MacOS 10.2 or higher, Linux 2.4.x or higher - CD-ROM drive - Pentium2, 400 MHz - RAM 32MB (Windows ME, 2000) – 64MB (Windows XP) - 20MB hard disk memory - USB interface 3.2. Driver Windows 98/ME/XP/VISTA, Linux 2.4.x, MacOS 10.2.x For these operating systems no drivers are required. Please, make sure that you have installed the most recent Service Packs of the operating systems in question. 3.3.
For the formatting on MAC you do not need any additional program. The hard disk must be formatted in the MS-Dos mode. 3.4.1 Installing Swissknife Install the „Swissknife“ program on a computer with a Windows operating system (WIN 2000, ME, XP). The installation is either automatic or after inserting the CD you can activate the program with > Start / Execute / Jobo / Swissknife / and a double click on „Swissknife.exe“. All the installation queries can be confirmed.
GB All data on the hard disk is now deleted and you can proceed to re-format. Important settings for the re-formatting process: The File System must be adjusted to FAT 32 > 2 Under Volume label enter the name GIGA ONE ULTRA and this drive description will then also appear in the connection with the computer in the drive structure > 1 Click on Create > 3 This completes the re-formatting of the GIGA ONE ULTRA.
3.5 Connect to PC If there are any problems in the USB connection to the PC or MAC these can be removed by connecting a USB HUB between the GIGA ONE ULTRA and the computer. 4. Warranty and Service 4.1. Warranty conditions This product is subject to the legal warranty periods relating to manufacturing faults and defects. Substance of the warranty: 1. In the event of malfunctioning caused by manufacturing defects JOBO AG will repair or replace the defective product at its own discretion. 2.
GB by a JOBO AG repair workshop - Damage caused by natural disasters (acts of God) - A hard disk change during the warranty period must only be performed by JOBO. Such a change by any other party will entail the loss of all warranty claims. If you want to make any claims under the warranty you are asked to contact the Technical Service of JOBO AG.
- When you use the product do not allow it to fall or collide with other object otherwise the cover, battery or other parts may be damaged. - Try not to avoid use under too dry condition. Try to block out static. - Do not shut off power suddenly while you are uploading/downloading, otherwise it will result in driver errors - When you use the hard disk please make sure to operate the file correctly. If you lose any file because of wrong operation we will not assume any responsibility.
GB USB compliance USB 2.0, 1.0 Operating Condition DC output Lithium polymer rechargeable battery Unit Size 0°C ~ 70°C + 5Volt @ 1.0Amper 3.7V 1300mAh 123mm x 77mm x 25mm Minimum PC system requirement PC IBM Compatible PC or MAC CPU Pentium III (and above) RAM 64MB USB Port USB1.0 or 2.
JOBO AG • 51645 Gummersbach • Kölner Straße 58 • Tel: 02261 / 545-0 • Fax: 02261 / 545-46 • Mail: info@jobo.com • www.jobo.
