User's Manual

BTR500 Instrucon Manual

FEATURES:

1. Baery：150mAh 3.7V

2. Playme：full charged baery can work about 3-4 hours

3. Bluetooth distance：8-10M in open area

4. Bluetooth Version: V4.1

5. Illuminated LED feature on top of Receiver

OPERATION:

A long press of the power buon will turn on the speaker and put the speaker into pairing mode.

When waing for Bluetooth pairing a blue LED next to the Micro USB socket will ﬂash at 0.5

second intervals.

Search for BTR500 on your device in the usual way and connect, once connected the blue LED will

light up and will ﬂash at 1 sec

ond intervals when playing audio.

A long press of the power buon will turn the receiver oﬀ.

Keyboard Funcon:

Power key:

Short press and release: pause, play, answer the call

Long press: Power on/oﬀ, pause, play, answer, recall

Double press: recall the last dialed call in the phone that connected with receiver

PAGE 1
BTR500 Instruction Manual FEATURES: 1. 2. 3. 4. 5. Battery：150mAh 3.7V Playtime：full charged battery can work about 3-4 hours Bluetooth distance：8-10M in open area Bluetooth Version: V4.1 Illuminated LED feature on top of Receiver OPERATION: A long press of the power button will turn on the speaker and put the speaker into pairing mode. When waiting for Bluetooth pairing a blue LED next to the Micro USB socket will ﬂash at 0.5 second intervals.
PAGE 2
Selﬁe key: Short press and release: take photo in photo mode or increase volume of media Long press: release alarm when enable anti drop function, need to connect again Volume” + “: Short press and release: next and increase volume Long press: increase volume Volume” –“: Short press and release: previous Long press: decrease volume CHARGING: Plug the Micro USB end of the charging cable into the charging port of the speaker and then connect the USB end of the charging cable to the USB port of your PC or othe
PAGE 3
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.