User's Manual
Instructions
Openthepackage,removetheremotecontrol,usethespecialcrossscrewdriver
toopentheremotecontrollerbackcover,installthe2*1.5Vbattery, closethecover
andturnthescrew
First,openthefirststepoftheremotecontrolcarcover,openthebatterycover
withaspecialcrossscrewdriver,put3*1.5Vbatteriesin the box, close thelid,turnthe
screws tightly, turn on the power switch and put the car on the relatively smooth
ground
Pickuptheremotecontrolhandleforwardsthecarforwardtobackthecar,pushing
back.Ifyouneedtohandlethecarleftturntotheleftattheremotecontrolhandle
tomovethe handleforward atthesametimetooperate atthesametime sothat
thecarcanmoveforwardandturnleft,turnrightifthe carneedstohandletothe
rightwhile pushing forward thehandle to push thiscar to forward andright, note
that the remote control car of this product requires a corresponding frequency to
normal operation such as remote control is 49.865MHz,the car must be 49.865MHz.
This corresponds to normal operation.
Any Changes or modifications not expressly approved by the party responsible for
compliancecouldvoidtheuser'sauthoritytooperatetheequipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
followingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)
this device must accept any interference received, including interference that may
causeundesiredoperation.