CRASHER BLUETOOTH WIRELESS STEREO SPEAKER INSTRUCTION MANUAL
INTRODUCTION Thank you for purchasing the Crasher. We are excited to welcome you to the JLab community. As an owner of the Crasher portable Bluetooth speaker, we are here to help assist you with any product questions or issues that come your way. The Crasher Bluetooth wireless speaker system applies the latest Bluetooth wireless technology that enables you to enjoy wireless music, audio, and hands free calls wherever you want. WHAT’S INCLUDED 1. The Crasher Bluetooth stereo speaker 2.
GET TO KNOW THE CRASHER 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Power On/Off Control Battery Check / Bluetooth Pair Button Pairing/Battery Check LED Indicators Charging Red/Green LED Indicator 3.5mm Audio In Jack to connect non BT devices Micro USB Charge In Jack for charging the speaker Telephone Call Button Volume + Volume – USB Charging Out Jack (to external portable devices) Microphone location Speaker Drivers Back Passive Woofer (located on back panel of unit) 1st Step - CHARGING THE CRASHER 1.
2 above) for 12 – 15 seconds until the 4 LED lights begin to blink MAKE & RECEIVE TELEPHONE CALLS 1. 2. 3. 4. 4. If a call is received while streaming music on speaker, the music will be muted and a ring tone will be heard in its place. Answer and end calls by pressing the talk button once (see item 7 above). Make calls by dialing on the cell phone and talking towards the speaker. Talk at a normal volume from 3 – 5 feet away.
3.7V 1500mA Portable Power Pack to charge your devices Output power of 2 x 1.5W BLUETOOTH Wireless Range: at least 33 feet Bluetooth v2.1 compliant CONNECTIONS Bluetooth 3.5mm Stereo input (AUX) Instantly transition from AUX to Bluetooth sound and back TROUBLESHOOTING If you experience any of the following issues, please try these quick steps to resolve the issue: No sound: - Ensure the speaker is charged fully. - Ensure the speaker is switched on. - Ensure your Bluetooth device is on and connected.
the user’s authority to operate the equipment. Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a protective barrier between the unit and surface to protect the surface. Use of this unit near fluorescent lighting may cause interference regarding use of Bluetooth connection. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
