User's Manual

DRAFT

OWNER’S MANUAL

ADVANCED ONE BUTTON KEYFOB FOR USE WITH

POWER-POLE® SYSTEMS WITH C-MONSTER™

Installation Operation

CAUTION: Read this owner’s manual carefully. Become

familiar with the controls, and know how to operate the

Power-Pole shallow water anchor system safely.

PAGE 1
DRAFT OWNER’S MANUAL ADVANCED ONE BUTTON KEYFOB FOR USE WITH POWER-POLE® SYSTEMS WITH C-MONSTER™ Installation Operation CAUTION: Read this owner’s manual carefully. Become familiar with the controls, and know how to operate the Power-Pole shallow water anchor system safely.
PAGE 2
DRAFT Questions? We’re here to help. Call our technical support staff. [(813) 689-9932 option 2] Pairing the Advanced Keyfob to your Existing C-Monster System A. Locate the “program” button on the top of the HPU (Hydraulic Pump Unit), and depress and hold it for 3 seconds until the LED steadily illuminates green in color. The unit is now ready to be programmed with a dash switch or remote control. -Note: With dual units, this procedure need only be performed on one HPU. B.
PAGE 3
DRAFT - Prior to use, read this instruction manual carefully. Become familiar with the controls and how to operate your Power-Pole shallow water anchor properly. The devices listed in this installation manual comply with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) The devices may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.