Pureformer Audio Isolation Transformer User Guide JK Audio
Description Pureformer is a simple solution to many noise and hum problems which occur when two audio products are connected together. Pureformer can be used wherever line level audio signals are connected between two or more pieces of equipment such as: computer sound cards, mixers, pre-amplifiers, tape decks, crosspoint switches, etc. Pureformer works in two ways. First, it isolates the electrical grounds of both pieces of equipment.
Connection Pureformer can also help when input / output incompatibilities exist. Audio inputs and outputs are almost always designed as AC coupled. This means that DC voltage differences are isolated from each other, even though the grounds are connected . In some cases, you may find equipment that is DC coupled. If both input and output are DC coupled, the signal will easily distort, break-up, or simply disappear. Pureformer safely isolates any combination of AC and DC coupled inputs and outputs.
Specifications Input: RCA phono jacks, 600 ohms impedance Output RCA phono jacks, 600 ohms impedance Frequency Response: Insertion Loss: Isolation: 20 Hz - 20 kHz, ± 0.1 dB 0.8 dB 1500 VRMS Warranty The model Pureformer is covered by a 2 year warranty to be free from defective workmanship and materials. In the event that the Pureformer needs repair, you must call us to get an authorization, and then carefully pack and ship it to us.