innkeeper 1rx™ Digital Hybrid User Guide JK Audio
Welcome Thank You Thank you for purchasing a JK Audio innkeeper 1rx Digital Hybrid. Please read this guide for instructions on setting up and using your new product. Getting Assistance If you have technical or application questions, call us M-F: 8:30am-5:00pm (CT) In the US & Canada (Toll-Free) All other countries: 800-552-8346 815-786-2929 Email us at: support@jkaudio.com Or check out our FAQ section for answers to common questions. Warnings & Safety Precautions • Read and keep these instructions.
Contents Overview 1 Getting to know your innkeeper 1rx 2 2 Controls & Indicators 4 Inputs & Outputs Getting Connected 6 Operation 8 Configuration 9 Optional Remote Control 11 Serial Port Interface 12 FAQs 13 Technical Information 14 Limited Warranty The innkeeper 1rx is covered by a 1 year warranty to be free from defective workmanship and materials. To obtain service, contact JK Audio by phone or email for return authorization.
Features Features 16 bit DSP Technology Mix Out XLR Line Output Auto-Answer (Switchable On/Off) Front Panel 1/4” Headphone Jack Proprietary Auto Null Algorithm (50 dB null) Remote Control via Screw Terminals or RS-232 AGC, Ducking, Presence RIU-IP Remote IP Interface 1 kHz Tone Generator Monitor Speaker Terminals Send XLR Line Input Send and Caller Signal Level LEDs Mic/Line Switch Send and Caller Volume Controls Caller XLR Line Output What’s in the Box? Detachable North American Power Cord
Overview Introducing the innkeeper 1rx™ innkeeper 1rx will allow you to send and receive audio over analog telephone lines. While this may seem like a simple task that any telephone can do, the challenge is getting the best quality audio from such a miserable audio path. What is a Digital Hybrid? The innkeeper 1rx digital hybrid connects audio signals to a standard analog telephone line without the variations in quality found with analog hybrids.
Getting to Know Your innkeeper 1rx 1 9 2 10 11 3 12 13 4 14 5 15 6 16 7 8 17 Controls & Indicators 1. Call Button Takes the line off-hook; press this button to answer a call or you can direct a call from your aux phone through the hybrid. 2. Drop Button Press this button to drop (hang up) a call. 3. Send Level Adjusts the signal that you are sending down the telephone line. 4. Caller Level Adjusts the level of the incoming caller’s audio as it is going out the output jacks.
Getting to Know Your innkeeper 1rx Indicators Cont’d 8. Mix Monitor Adjusts the mix signal level sent to the headphone and rear panel speaker terminals. 9. Power LED Lit when unit is plugged in and receiving power. 10. Ring LED Flickers when you have an incoming call. 11. OH LED Lit when you are on line with a call (off-hook). 12. Signal LEDs Send LEDs represent the signal level going out to the telephone line. Receive LEDs represent the signal level coming from the phone line, after the DSP. 13.
Getting to Know Your innkeeper 1rx 1 2 3 4 5 6 7 8 9 Inputs & Outputs 1. Phone Line Connect to a standard, single line, analog telephone line. 2. Aux Phone Connect a single line analog telephone for call setup / dialing, or producer call screening. 3. Caller Output Male balanced XLR line-level output contains only the callers voice. 4. Mix Output Male balanced XLR line-level output contains a mix of send and receive audio determined by the and level controls.
Getting to Know Your innkeeper 1rx Inputs & Outputs Cont’d 7. Remote Control Jack 10 pin RJ-50 modular jack for connection to: A. B. C. D. 8. RS-232 Cable (Included) JK Audio RIU-IP Remote Interface. See page 11. JK Audio Guest Module 1 Remote Keypad. See page 11. JK Audio Concierge Switch Core Remote Terminals Screw terminals provide connections for a small speaker, remote LEDs, tape recorder control, or console call control switches. 1. Speaker (+) Minimum 8 ohms, 1 watt max 2.
Getting Connected Connecting to a Single Line Phone 1. Connect the supplied RJ-11 phone line cable between the jack marked and your wall jack. Be sure this jack supports standard single line analog telephone operation. 2. You may want to connect an auxiliary telephone to the innkeeper 1rx jack so you can dial out and set up calls, or use the feature to answer incoming calls.
Getting Connected 1 2 9 Set to Mix Minus Caller 5 Caller 3 4 Mic 1 Mic 2 Aux - + - + Pre /Mon Post /FX Mic 3 Aux - + - + Pre /Mon Post /FX Mic 4 Aux - + - + Pre /Mon Post /FX Aux - + - + Pre /Mon Post /FX Line In 5/6 6 Aux Send Main Mix Out Headphones L Pre /Mon L R Post /FX R Aux - + - + Pre-Fader (Mon) Post /FX 8 7 Recording Device Completing Setup 9. Connect the supplied AC cable to an AC power outlet. 10.
Operation Send Signal Level The LEDs display the signal level as it goes out to the phone line. The goal is to drive the phone line at high enough levels to avoid phone line noise, but not so loud as to cause excessive clipping. Adjust the level control until you see occasional flashes of the second green LED (-9dB) and very rarely any flashes of the red -3dB peak Send LED. These flashes should occur only during loud speech bursts.
Configuration Auxiliary Telephone innkeeper 1rx does not disconnect the auxiliary telephone when you press the button. You can use an auxiliary phone to place or screen a call and then place it on hold. When you are ready to take the call on innkeeper 1rx, simply press the button. Your telephone will automatically release the hold. If you need to take the call back on the aux telephone, simply pick up the telephone handset before the innkeeper 1rx button is pressed.
Configuration Custom Dry Line Installation Innkeeper 1rx was designed to work on standard (wet) telephone lines as well as on custom PBX (dry) lines. Dry line installation is always a custom configuration and requires substantial telephone system knowledge. These installations are found in radio and television studios for both PBX and intercom applications.
Optional Remote Control Devices RIU-IP (Sold Separately) This remote control interface was designed for use with innkeeper 1rx as well as JK Audio innkeeper 2 and innkeeper 4 digital hybrids. This unit contains a web server which allows the user to send and receive control data through their web browser. RIU-IP can be connected to the user’s computer NIC card for direct control, to a switch or hub for network control, or to an Ethernet port with internet access for control from anywhere in the world.
Serial Port Interface ASCII Command Remote Control innkeeper 1rx digital hybrids built after April 2007 include an RS-232 interface for remote control applications. The enclosed CN081 serial port cable connects to the jack on the back of the innkeeper 1rx.
FAQs ASCII Command Remote Control Cont’d Command Name n Parameter / Description /VBn(+) n=0 n=1 n=2 n=3 n=+ Verbose Mode OFF LEVEL LEVEL 2 MAX ON Echo Off & Unsolicited Responses Off. Echo Off & Abbrev. Responses Active. Echo On & Expanded Responses Active. Echo On & All Responses Active. Turns On Line Termination Char ‘/’. Unsolicited responses informing you of changes in call state will vary depending on the verbose mode selected. FAQs 1.
14 innkeeper 1rx™ Digital Hybrid Mic/Line Send Input Send Level Send Mix Caller Mix Caller Digital Hybrid Monitor Level Mix Out Caller Out Phone Jack Phone Line Jack Headphone Speaker Terminals Technical Information Block Diagram
Technical Information Specifications Input Balanced Female XLR: Impedance / Level 1k ohms / 15 mV RMS; -34 dBu nom.; Mic/Line Pad Switch = +6 dBu max Output Balanced Male XLR: 200 ohms / 500 mV RMS; -4 dBu nom.; +14 dBu max; Caller Only 1/4” Stereo Headphone: 8 ohms / 250 mW per channel Speaker Screw Terminals, 8 ohms, 1 watt Misc Phone Line: RJ11C Aux Phone: RJ11C Ringer: 0.8B REN Isolation: 1500 VAC Frequency Response: Telephone Side 200 Hz-3.
Declaration of Conformity Declaration of Conformity Manufacturer’s Name: Manufacturer’s Address: JK Audio, Inc. 1311 E 6th Street Sandwich, Illinois 60548 USA Declares that the product: Product Name: Model Numbers: innkeeper 1rx Digital Hybrid innkeeper 1rx Conforms to the following Product Specifications: 16 Safety: EN 60950 / AS/NZS 60950:2000 CAN/CSA-C22.2 No.
Declaration of Conformity The product herewith complies with the requirements of the following Directives and carries the CE marking accordingly: LVD 2006/95/EC (Safety) R&TTE 1999/5/EC (Telecom) EMC 89/336/EEC (EMC) RoHS Directive 2015/863 The Technical File containing supporting documentation is maintained at: JK Audio, Inc (Corporate Headquarters) Compliance Manager 1311 E 6th Street Sandwich, Illinois 60548 USA 815-786-2929 phone 815-786-8502 fax Declaration of Conformity 17
FCC Registration FCC Registration Your new JK Audio product has been registered with the Federal Communications Commission (FCC). This product complies with the standards in Part 68 of the FCC rules. 1. Connection and use with the nationwide telephone network The FCC requires that you connect this telephone equipment to the national telephone network through a USOC RJ-11C modular telephone jack. This equipment may not be used with Party Line Service or Coin Telephone Lines.
FCC Compliance Notice FCC Part 15 Subpart A Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
innkeeper 1rx™ Digital Hybrid User Guide Version 4/16/22 JK Audio, Inc. 1311 E 6th St. Sandwich, IL 60548 United States Telephone: 815.786.2929 Toll Free: 1.800.jkaudio Fax: 815.786.8502 www.jkaudio.com © 2022 JK Audio, Inc. All rights reserved.