User's Manual

miniPCI Manual

1. Product Overview

This JA24MP series PCI adapter contains a Atheros AR2413/4 chip for IEEE

802.11b/g Wireless LAN.

Based on the latest industry standard Wi-Fi Certified IEEE 802.11b/g specifications,

the mini PCI

adapter supports key security features like Wi-Fi Protected Access (WPA), WPA2,

WEP and 802.1x.

You can find this miniPCI module that is seated inside the wireless products such as

the notebook

computers or any other devices containing Mini PCI socket.

2. Packaging Contents

The mini PCI module package contains the following item(s): 1 x Wireless Mini PCI

adapter

3. Installation guide

 Shut down the power of the device.

 Align the PCI adapter to the Mini PCI socket.

 Adjust and push down the PCI adapter gently until the metallocking levers aside

from the Mini

PCI socket is fastened. (Please take note that the PCI adapter can only fit in one

direction

due to the keyed notch. Wrong orientation will cause improper installation and may

damage the Mini PCI socket ! ).

 Connect the antenna(s) on the mini PCI module.

 Turn on the device could work properly.

PAGE 1
miniPCI Manual 1. Product Overview This JA24MP series PCI adapter contains a Atheros AR2413/4 chip for IEEE 802.11b/g Wireless LAN. Based on the latest industry standard Wi-Fi Certified IEEE 802.11b/g specifications, the mini PCI adapter supports key security features like Wi-Fi Protected Access (WPA), WPA2, WEP and 802.1x. You can find this miniPCI module that is seated inside the wireless products such as the notebook computers or any other devices containing Mini PCI socket. 2.
PAGE 2
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
PAGE 3
RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. If the end product integrating this module is going to be operated in 5.15 ~5.