Use Instructions

ManualsBrandsJIZHIDUOMI ManualsElectronicsCOMBINED WIRELESS CHARGER AND CUP WARMER

Model：JD001

Model Name：COMBINED WIRELESS CHARGER AND CUP WARMER

B.1 Product Description

This product is a smart wireless power bank that supports long-distance

wireless charging from 0.3 to 0.5 mm. It can be charged wirelessly and

is compatible with all devices (smart phones) with a built-in wireless

receiver.

.It features functions such as over-voltage protection, over-

current protection, over-temperature protection, short-circuit

protection and foreign object detection. The product is widely used in

offices, homes, restaurants, conference rooms outdoor, etc.

B.2 Instructions for use

1. Before installing the product, it is necessary to clean the installation area.

2.After completing the previous step, connect the power supply. Coordinate the

position by using the center circle. The best position is the center of the silicone

circle. After adjusting to the best position, mark that position.

3. Place it on top to use, or use it with a data cable.

4. After the alignment is completed, the smartphone with wireless charging function

can be charged.

5. Note: When the product is not in use, please turn off the power to avoid

excessive/overheating.

B.3 Electrical Specifications：

Input voltage range

5-12Vdc±0.5Vdc

Rated input voltage

5V-12Vdc

Working distance

2mm-5mm

Standby loss

< 1W

Rated input current

1.67A

Input efficiency

82%

Working frequency

115~205kHz

Input current protection value

(not in power transfer mode)

Input current protection value

(has entered power transmission mode)

Coil current protection value

(not in power transmission mode)

Coil current protection value

(has entered the power transmission mode)

Working temperature protection value

70℃

Summary of content (2 pages)

PAGE 1
Model：JD001 Model Name：COMBINED WIRELESS CHARGER AND CUP WARMER B.1 Product Description This product is a smart wireless power bank that supports long-distance wireless charging from 0.3 to 0.5 mm. It can be charged wirelessly and is compatible with all devices (smart phones) with a built-in wireless receiver. protection, over.It features functions such as over-voltage current protection, over-temperature protection, short-circuit protection and foreign object detection.
PAGE 2
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.