Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd 8762-01 (MESH8762-01/8762-01N) Specification MESH Bluetooth Low Energy (BLE) 5.0 Module Module No.: MESH8762-01/8762-01N Version: V1.0 Date: 2020-05-11 3/F,A5 Building Zhiyuan Community No.1001,Xueyuan Road Nanshan District,Shenzhen City TEL: 0755-83949973 FAX:0755-82899448 E-mail:songmx@jingxunsoft.
Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd Content 1. Introduction ........................................................................................................................ 3 2. Features .............................................................................................................................. 3 3. Applications ........................................................................................................................ 3 4. Module Diagram ...
Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd 1. Introduction The 8762-01/8762-01N module with internal PCB printing antenna is MESH Bluetooth Low Energy (BLE) solution which is fully Bluetooth 5.0 standard compliant and allows easy connectivity with Bluetooth Smart Ready devices. 8762-01/8762-01N supports BLE slave and master mode operation, including broadcast, encryption, connection updates, and channel map updates. It is RoHS-compliant and 100% lead (Pb)-free.
Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd Sports and fitness tracking Wearable devices PC and tablet peripherals, including Mouse / Keyboard 4.
Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd Dimension Diagram Dimension unit: mm Top View PCB Thickness: 0.8±0.
Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd Side View 5. Module Schematic Please further contact if needed.
Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd 6. Pins Description Pin NAME 1,3 GND 2 I/O OO Description P RF GND NC O NC 4 #RESET I NC, For External Reset 5 P4_1 I/O GPIO interface, Function extend pin 6 P4_0 I/O GPIO interface, Function extend pin 7 P0_6 I/O GPIO interface, Function extend pin 8 P0_5 I/O GPIO interface，Function extend pin 9 VDD_BAT P VDD，3.
Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd 8. Power Consumption Operation Mode Consumption Operation (TX/RX) 0dBm <10mA Standby (Deep Sleep) depend on firmware 0.7uA (optional by firmware) 9. Antenna Specification ITEM Frequency UNIT MHz MIN TYP 2400 V.S.W.R MAX 2500 2.0 Gain(AVG) dBi Maximum input power W Characteristics TYPE Meander IFA Polarization Vertical Radiated Pattern Omni-directional Impendence 50 SIZE --- 0 1 10.
Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd 12. Reflow Profile 13. Application Design Note To Be Discussed 14.
Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd NO GROUND Copper Boundary Influence of GND on Antenna The GND interrupts the emission of antenna but isessential. RF vertical GND is important in antennadesign. Normally, the emission rate is improved as more GND is secured and edged GND of antenna is cut. 15. Critical Materials Please further contact if needed.
Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd 16．FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd Labels Host Device must contain the following label on the outside of the unit: Contains FCC ID：2AWEE-8762-01 Installation Guidance The final host / module combination may also need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device.
