Product Specification on MakeID Pocket Printer Packing list Printer…………1 set Consumables…………1 coil USB cable…………1 cable User guide…………1 copy Major parts 5 2 3 1 4 7 8 6 : Key function: Power key: turn on/off the printer (long press for 2s) Unlock key: unlock the cover 1、Unpack key 2、Card view 3、Power key 4、Indicator 5、Unlock key 6、USB interface 7、Cover 8、Lower casing
Unpack key: press for multiple times to unpack Card view: substitute different cards Installation and replacement of consumables: 1. Open the cover. 2. Install the consumables and close the cover. Indicator status: Green light always on: fully charged/all set Red light always on: charging/run out of consumables/print head overheating/cover unlocked Red light flickering: low battery, leading to illegibility.
APP download: 1. Search and download "MAKEID-Print" from Google Play or App Store; 2. Scan the QR code above to download as instructed. Connect: 1. Confirm mobile bluetooth function is available; 2. Open the APP and click the "Connect" at the upper right corner of the APP; 3. Search for the printer; 4. Connect to the printer as instructed; Charge: Micro USB input interface; 5V 2A input charger. The product offers no power adapter, so users may charge the product by standard USB charger plug; Battery: 7.
After cleaning the print head, please wait for 1~2 min for full volatilization of alcohol. Please avoid direct contact with the print head in case of damage. After printing in particular, please do not immediately touch the print head in case of overheating and burning. I. Principles of Warranty Services 1.1 For products within term and range of warranty: Returnable, replaceable or maintainable within 7 days; Replaceable or maintainable within 15 days; Maintainable free of charge within 1 year. 1.
a. Printer (except for the print head): 1-year warranty. b. Print head: four months or 10 km in cumulative print length, whichever earlier. Attention: The print head may impact the consumables in normal usage, which may cause a friction with consumables and corresponding normal loss.The quality of consumables and service environment directly affect the service life of the print head and even damage the print head.
FCC statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.