User's Manual
Rex Pen
User Manual
Declaration :
The Product Information Listed in this Manual is for Reference Only.
The Contents of this Manual may not be Applicable due to the Rapid
Development of Technology and the Complexity of Computer Operating
System. We are not Liable for any Omissions or Errors in its Contents.
If there are any Errors, We are not Obliged to Assume any Responsibility
for the Users of this Manual, nor are We Liable for any Errors. Eliminate
the Possibility of Content Updating at any Time
Caution :
This Product has the Function of Emitting Laser Light. Never direct Laser
Light into the Eyes to Avoid Damage. Children under 14 years Old are not
Suitable for this Product. This Product is for Office, Teaching Equipment,
and Can not be Used as Toys for Children.
EPL-922A Rex Pen :
1.45mm Pen tip
Package included:
◆ EPN-922A Rex Pen
◆ EPN-922A Laser Kit
◆ EPN-922A Charging Cable
◆ EPN-922A USB Dongle
◆ Spared Pen Tip( Original Tip X 1, Sharp Tip X 2 )
◆ User Manual
Rex Pen:
Rex Pen is an Active Pen with Natural Pressure Sensing and base on Microsoft
Pen Integration Guideline Version 2.0 (MPP 2.0). It Allows Users to Write
Directly onto the LCD Screen Surface of a Computing Device which Compatible
with the MPP2.0.
Compatible with the following Devices:
Normal( MPP1.51 )
Microsoft Surface Pro3 / Microsoft Surface Pro4 / Microsoft Surface Pro5
Microsoft Surface Pro6 / Microsoft Surface Laptop
Microsoft Surface Book Series / Microsoft Surface Studio
Microsoft Surface Go.
Tilt( MPP2.0 )
Microsoft Surface Pro5 / Microsoft Surface Pro6 /Microsoft Surface Book 2
Microsoft Surface Go.
Available time
Continuous Use : 110 Hours
Standby : 180 Days Max
The Function of Related Parts:
Pen Tip
Plastic POM and Anti-friction Tip with 1.5mm Diameter.
The tip on Ink was designed to be durable and should be able to cover
over20 kmbefore getting worn out. It is Changeable if needed, just Clip
the Gap between Pen Tip and Pen Tip Cover, then Pick the Pen Tip out.
Please Use the Sharp Tip or Microsoft Pen Tip to Change it.
Eraser Button
(1)Press the Button to Erase in the APPs
In Some APPs, Need to Push the Pen Tip to Enable the Function.
(2)Press the Button about 2 Seconds to Power on / Wake up the Pen.
Indicator LED
(1) Blue – Power is On and Start Writing.
(2) Flashed Blue - Fast Flash to Power on or Wake up.
(3) Green – Power Charging During.
(4) Flashed Red - Slow Flash to Show Power has been Run out and Need
to be Charged Immediately. But it Still can Work for 3 Hours.
(5) None – Put the Pen Alone with 5 Minutes then Power off or Power
Charging is Full and Turn to Power off
Right Button
Use as the Right Click Function in Different APPs with Different Action.
Just Press the Button on the Touch Screen to enable the function.
Power Contact
Use EPN-922A Charging Cable to Attract onto the Power Contact for
Charging.
Laser Kit via Rex Pen :
This Kit will Work after Fixing onto the Power Contact of Rex Pen. Based on
the 2.4GHz Wireless Communication, Applicable with Microsoft Office,
Useful for Meeting Report or Education Demo.
Compatible with the following System
Microsoft Windows 7 / Windows 8 / Windows 10
Laser Radiation
Wave Length λ=650nm
Max. Output < 5mW
Color = Red
Wireless Communication
RF 2.4GHz via USB Dongle to Computer
Applicable Software
Microsoft Office
Available time ( Not Including the Operating time of Rex Pen on Surface Pro )
Lifetime of Laser : 10000 hours
Working time of laser : 25 hours
The Function of Related Parts:
Power Button( Erase Button of Rex Pen)
Press the Button about 2 Seconds to Power on / Wake up the Laser Kit.
If Rex Pen is Active already, no need to Press it again.
Page Down Button
Press and Let the Office file to be Page Down.
Laser Button
Press to emit the Laser and Loose to be close the Laser.
Page Up Button
Press and Let the Office file to be Page Up.
Laser Lens
Laser will Emit through this Lens, Do not Look toward it when the Laser
Function Work.
ID Setting
The Wireless Connecting has been paired OK before shipment. So the User
Does not need to Do any Pairing. Once need to Re-pairing, Please Follow
below Steps to Complete the Necessary ID-Setting
(1) Loose out the Laser Kit.
(2) Insert the EPN-922A USB Dongle to the USB Port of Computer.
(3) Keep Pressing the Page Down Button, and Tighten up the Laser Kit to the
Rex Pen which is Power-on. After 3 Seconds, Connects On.
Charger Kit via Rex Pen:
This Kit will Work after Fixing onto the Power Contact of Rex Pen.
Charging time
USB +5V / 1.0A / 4 Hours
The Function of Related Parts:
Indicator LED
(1) Green – Power Charging During.
(2) None – Battery Charged Complete.
Charging Cable
Before Charging, Loose out the Laser Kit and Insert Pen Tail of the Rex Pen
into the Charging Cable, and USB Plug to Connect to the USB port of
Computer.
When Charging, the Power of Rex Pen will be off.
USB Dongle :
This USB Dongle is Used to Connect the Laser Kit with Computer. If Need
to Use the Function of Page Up and Page Down in Microsoft Office, Please
Insert the USB Dongle into the USB Port on Computer.
Compatible USB Port
USB3.0/2.0/1.1
Customer Service
FCC :
This device complies with part 15 of the FCC Rules. Operation is subject to
the condition that this device does not cause harmful interference
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.Changes or modifications not
expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE
:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures :
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.
Thedevicecanbeusedinportable exposureconditionwithoutrestriction.
FCC ID: 2AFNZ-EPL922A
CAUTION
LASER RADIATION DO NOT STARE INTO BEAM
MAX OUTPUT:<5Mw
WAVE LENGTH:650±20nm
CLASS 3R LASER PRODUCT
EPN-922A Rex Pen
Power Button
EPN-922A Laser Kit
Page Down Button Page Up Button
Laser Button
Indicator LED Charging Cable
Laser Button
EPN-922A USB Dongle
Pen Tip Eraser Button Right Button Power Contact
Eraser Button
Spared Pen Tip EPN-922A Charging Cable
USB Port
Surfaceシリーズ向けに設計
充電式と省エネ型設計
Surfaceペンの使用時間：110時間
Surfaceペンのスタンバイ：180日間
レーザーの寿命：10000時間
レーザーの使用時間：25時間
カスタマーサービス＆终生品質保証
Designed for Surface Series
Rechargeable and Power-Saving Design
Playing Time of Surface Pen: 110 hours
Standby of Surface Pen: 180 day
lifetime of Laser:10000 hours
Working Time of Laser: 25 hours
Helpful Customer Service & Lifetime Warranty