JME-8282R user guide 1. Keyboard Appearance draw 2.F 2.
3. Back view 4. Feature 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 Transmission mode:RF Frequency:2410~2473MHz RFchannel quantity:64 Center of Channel: 2410/2411/242…2471/2472/2473MHz Width of Channel: 1MHz Hopping Technology : Digital FHSS (Frequency Hopping Spread Spectrum) Data Send timing: <500us Power:2pcs *AAA alkaline batteries (1.
5. Use guide 5.1 Battery Installation a. Unlock the battery cover b. Install the battery and match the code Caution: Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions Need to check and match the code for the first of time of usage only, Please match the code as below : 1. First, confirm the receiver has been connected to the computer. 2.
6.FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.