JME-8265R User’s Guide 2.
1 R & TTE Compliance Statement This equipment complies with all the requirements of the DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and telecommunication terminal equipment and the mutual recognition of their conformity (R & TTE). Federal Communications Commission Radio(FCC) Statement This device complies with Part 15 of the FCC Rules.
2 1 Feature Transmission mode：RF Frequency：2410~2473MHz RFchannel quantity：64 Center of Channel: 2410/2411…/2472/2473MHz Bandwidth of Channel: 1MHz Data Send timing: <500us Power：2 × AAA batteries Modulate mode：GFSK Effective distance：12m Quantity of connection ID：24Bits (8,388,608 ID can be used) 2 Number of keys：99 keys Low battery indicating voltage:2.
3 3 Installation & Use Plug the USB receiver into a computer’s USB port: □ Windows 98 SE/ME The system finds new device and prompts you to insert the operating system CD-ROM. Follow the instructions on the screen to install the required drivers. □ Windows 2000/XP/Vista The operating system identifies the receiver as a “USB Human Interface Device” and begins installation automatically.
4 Put the batteries into the batteries casket according to the polarity markings inside the battery casket, lock the cover. For the first time of usage, you need to bind the keyboard to the receiver as below: With the keyboard close to the receiver within 50cm, press the binding button on bottom of the keyboard for about 6 seconds, when the receiver’s led blinks 4 times, the keyboard is ready to be use.
5 In normal use, the led on the receiver blinks according to the wireless keyboard’s operation, if the keyboard and mouse are not in operation, the led is off. Keyboard LED function Num Lock Cap Lock Power----This LED is on when the keyboard is active. When the keyboard enter sleep mode or it lost connection to the receiver, the LED will be off. Low Battery----This LED will be lit if the battery power is low, you should replace the battery right now.
6 function, please hold-down “Fn” key before press these keys.
