User's Manual

JME-3250A user guide

1、

、、

、Specification

2、

、、

、How To Use:

a. First ,connect the 2.4GHz RF-dongle receiver to PC.

b. The led of 2.4GHz RF-dongle receiver will light for about 2 seconds ,and

then off.

c. After the 2.4GHz RF Keyboard and Mouse link with 2.4GHz RF-dongle

receiver the led will twinkle 4 times. The led also twinkle 4 times if the dongle

receiver find the keyboard and mouse which has linked with this dongle after the

dongle connected to the PC.

d In normal use, the led twinkles according to the 2.4GHz RF keyboard and

mouse’s operation, if the keyboard and mouse are not in operation, the led is off.

PAGE 1
JME-3250A user guide 1、、Specification 2、、How To Use: a. First ,connect the 2.4GHz RF-dongle receiver to PC. b. The led of 2.4GHz RF-dongle receiver will light for about 2 seconds ,and then off. c. After the 2.4GHz RF Keyboard and Mouse link with 2.4GHz RF-dongle receiver the led will twinkle 4 times. The led also twinkle 4 times if the dongle receiver find the keyboard and mouse which has linked with this dongle after the dongle connected to the PC. d In normal use, the led twinkles according to the 2.
PAGE 2
Wireless Laser Mouse Users’ guide Installation 1. Plug the receiver into a USB port of your computer. 2. Insert battery into mouse. 3. Click the mouse key to get connected with the receiver. Trouble Shooting 1. Check receiver connection; try to inserting receiver to another USB port on your computer. 2. No Connection between the mouse and the Receiver. Re-insert the Receiver. take out the battery from the mouse and reinstall it.