LL303 Solar Powered Asset Tracker User Manual V1.0 No part of this document may be reproduced, retranslated, or copied in any form or by any means or for profit (electronic, photocopying, taping etc.,) without written permission of the Company.
CONTENTS 01 ...... Introduction 1.1 Features 1.2 Specifications 1.3 Packing List 02 ...... Appearance 03 ...... LEDs 3.1 Green (Cellular) 3.2 Red (Power/Work Status) ...... 04 Use Instruction 4.1 Installation 4.2 SIM Card Attachment 4.3 Power-On and -Off 4.4 Charging 4.5 Work Modes 4.6 Alert Functions ...... 05 ...... 06 ......
Making connections simpler 01/Introduction 1.1. Features GPS/BDS/WIFI/LBS Tamper alert Vibrating alert Low batter alert Solar charging 1.2. Specifications GNSS accuracy < 10m Weight 480g (excluding base) Dimensions (LxWxH) 200x90x25mm (excluding mounting holes) Operating current 120mA Battery Rechargeable Li-Polymer 10000 mAh/ 3.
Making connections simpler Light sensor (optional) Buzzer 03/LEDs 3.1. Green (Cellular) Status Meaning Fast blink [0.3s–0.3s (on–off)] Network initializing Slow blink [0.1s–3s (on–off)] The device is in a call/online Solid on No SIM card or SIM card error Slow blink [1s–3s (on–off)] Unable to connect to the platform 3.2. Red (Power/Work Status) Status Meaning Fast blink [0.3s–0.3s (on–off)] The battery is low Slow blink [0.
Making connections simpler Standard Micro Nano Step 2 Remove the waterproof rubber plug on the side and insert the SIM card in place, as the following figure shows: (Note: The device must be powered off before removing the SIM; otherwise, the SIM may be burned.) Note: The SIM card must be inserted correctly, has GPRS services activated, and is not in arrears. If the SIM is identified and requires a PIN, please disable the PIN request. 4.3.
Making connections simpler 4.5. Work Modes ● Regular GPS mode In this mode, the device always has its network services enabled and will upload location data at a fixed interval, which can be configured via the location service platform or mobile app specified by your dealer. ● Tracking mode (default) In this mode, the device can automatically recognize current location conditions and activity status of the vehicle on which it is installed and intelligently choose a positioning system and an upload interval.
Making connections simpler Power-on failure Failed to access the network Failed to query a location No SIM. Insert a SIM. The battery is exhausted. Charge the device. The SIM card may be attached improperly. Check the SIM. The metal side of the SIM card is stained. Clean it with an eraser. The SIM is invalid. Please contact your network service provider. The device is out of GSM service areas. Try it in a service area. The signal is extremely weak. Try it in an area with strong signals.
This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. The product specifications and information in this document are for reference only and no prior notice will be given if any change is made. Unless otherwise stated, the content of this document is not a guarantee in any form.