Data Sheet

ManualsBrandsJilong ManualsFiber Optic Network MaintenanceOptical Time Domain Reflectometer Jilong KL-6200

F-KL-6200 Palm OTDR

Product Summarizations:

F-KL-6200 palm OTDR is the newest instrument

designed for testing FTTx network. It's mainly used to

measure the physical characteristics of optical fiber

under test, such as the length、the transmission loss

and the splice loss etc.. It can also locate the faults or

breaks of optical fiber. It's widely applied in the

manufacture, construction and maintenance in optical

fiber communication system.

F-KL-6200 palm OTDR is novel and beautiful in appearance.

F-KL-6200 offers three wavelengths and VLF in one handheld unit, especially

for testing passive optical network (PON) in FTTx. In addition.

Mainly features:

♦ handheld、lightweight and convenience for carrying

♦ Advanced anti-reflective TFT LCD,visible clearly in field

♦ 1.6m extra-short event dead zone

♦ 0.25m high resolution, 65535 sampling points

♦ Fast auto measurement,one-button operating

♦ Double USB interfaces, supporting USB stick and direct cable

download to PC via ActiveSync

♦ Supporting Bellcore GR196 file format in writing or reading

♦ Indicating remaining capacity of battery and warning if the voltage of

battery is low.

♦ WinCE operation system, double operating interface of Chinese and

Summary of content (5 pages)

PAGE 1
F-KL-6200 Palm OTDR Product Summarizations: F-KL-6200 palm OTDR is the newest instrument designed for testing FTTx network. It's mainly used to measure the physical characteristics of optical fiber under test, such as the length、the transmission loss and the splice loss etc.. It can also locate the faults or breaks of optical fiber. It's widely applied in the manufacture, construction and maintenance in optical fiber communication system. F-KL-6200 palm OTDR is novel and beautiful in appearance.
PAGE 2
English ♦ Built-in lithium battery with high capacity for over 10 hours of operating life ♦ Visible fault locating (VFL) ♦ Universal FC/PC,FC/SC,FC/ST connector type, it's convenient for surface cleaning ♦ Unique function of updating system on-line, returning to factory is unnecessary ♦ Extra-short Event Dead Zone F-KL-6200 palm OTDR has extra-short event dead zone, which is suitable for testing short optical fiber and pigtail optical fiber.
PAGE 3
communicate with PC using ActiveSync via USB cable, through which the files can be translated rapidly. ♦ Convenient VFL The built-in 650nm visual fault location is ideal for easily identifying bad splice, bad connector, break or macro bend. ♦ Application: F-KL-6200 Palm OTDR is mainly used to measure FTTx network, it provides a low cost solution for users.F-KL-6200 offers three measuring modes: manual mode (including real time mode and average mode), auto mode and dead zone mode.
PAGE 4
will increase the time of signal processing. Dead zone mode: this mode is suitable for testing optical fiber with short distance and the optimized settings of distance range, pulse width and attenuator can be executed automatically. To get the best result, the terminal return loss should be guaranteed less than -40dB.
PAGE 5
Interface VFL USB, Min-USB 650nm±10nm, 2mW(typical); CW/1Hz Language English Optical Connector FC/UPC (universal connector) Power Supply Dimensions Weight DC:15V∼20V(3A), (AC adapter 100∼240V,50/60Hz,1.5A),Built-in Lithium battery： 4400mAh,7.4V,operating time≥10 hours33 210mm*100mm*60mm about 1kg Note1：pulse width 10240ns, average times≥300，SNR=1，23℃±2℃; Note2：Pulse width:10 ns, terminal reflection loss: ≥40dB, typical; Note3：Low brightness, exclude measuring.