PTZ DOME CAMERA QUICK OPERATION GUIDE Power supply: DC 12V/2A Note: Due to the continuous updating of the product and software, there may be a discrepancy between the operating guide and the APP interface. All the instructions are subject to the actual operation interface.
Contents 1. Introduction........................................................................................................................- 1 1.1 What’s the PTZ Camera?............................................................................................ - 1 2. Quick Connection and Installation....................................................................................- 2 2.1 PTZ camera Connection............................................................................................
1. Introduction We’d like to thank you for buying JideTech PTZ IP Camera. You will soon find that you love everything that this fantastic security camera offered. In this user guide, we’ll cover everything you want to know about the camera, including how to download the HiSee app, how to connect your home network in different ways, how to control it and more. With this manual, you will find that it is very easy to us. 1.
2. Quick Connection and Installation 2.1 PTZ camera Connection 3 Ways to Connect camera into network. Note: POE Camera requests the POE Switch power output at least 25.5W 2.
3. Download Software a) Download zip files from http://www.jidetech.com or Mini CD in your Computer. b) Unzip the software and installed HCMS on your computer.
4. View Video by IE Browser and Setting 4.1 Login with IE browser a) Open the software named “ IPWizardlll”(called search tool) b) Use the Search tool to find camera in your network REMARK: Please check if your router’s gateway is the same with default ip camera’s. if not, you should modify camera ip address to match your router’s gateway before you back to watch video.
c) Modify IP address: Modify the IP address and gateway, then click Modify Network to save new IP address, After that, click “ search” to get the new IP address -5-
d) Put your IP address in IE browser, and enter user name and password. Default user name: admin, password: admin e) The 1st time you accept camera, please download and install the ActiveX, then refresh the page to allow the ActiveX run on your computer. You also can change Language Upper right corner.
4.2 Function Introduce Video preview function introduction Stream type adjust 1. Main stream viewing 2. Sub stream viewing Video size 1. Video size regulate 2.
Play mode 1. Live 2. Smooth Color mode 1. Fresh 2. Standard 3. Cold Video preview browser language selection Currently only Chinese and English are supported. PTZ control 1. 2. 3. 4. 5. 6. 7. PTZ function Set preset Iris Focus Zoom Pan Speed Tilt Speed Focus Speed Zoom Speed 4.3 Setting 4.3.1 SettingSystem a) System: about camera’s basic information regarding version, Network Settings, Alarm Settings, NTP Settings, Video Settings, MJPEG Video Settings.
b) Time: setup your time zone; enable/off NTP, Sync Time. C) Advanced: firmware upgrade, Factory setting and Reboot.
Firmware upgrade: if there is some upgrade software, should browse the file from computer and “submit” 4.3.2 Setting Network a) Network: Enable/Off IP address by DHCP (if the router enabled the DHCP, the camera can get HDCP IP address Automatic). Also can modify camera IP address by manually b) FTP: File Transfer Protocol. Fill in the IP address of the server uploaded and captured. Servers are free to search for tutorials in search engines.
c) SMTP: Simple Mail Transfer Protocol (Email Alarm) Server: email service Port: email port Password: Email’s password (some of the Email needs Authorization code d) QoS：Quality of Service e) IGMP: Internet Group Management Protocol. Change Stream Type.
f) Port: according to added 3rd party software/device port to modify g) DDNS: Dynamic Domain Name Server. Enable DDNS to set Up.
h) P2P：Get camera’s P2P code and Download the App via scan QR code i) Protocol: This PTZ camera is supporting Onvif, HK, XM and Topsee Protocol(It also support DaHua, Hikvision and Amcrest etc Protocol) - 13 -
4.3.3 SettingCamera a) Basic Settings: setup camera pictures information.
c) Effect Settings d) White Balance - 15 -
e) Reset: reset camera’s basic setting, like: Basic Settings, Exposure Settings, Effect Settings and White Balance 4.3.
b) Character Display. Font Size and Content: Name showing on steam at Upper left corner Date &Time: Upper right corner’s Date and time on stream c) Motion Detection: select area in the picture and enable motion detect, then click “save” to apply it.
e) Path: Picture and video saving path on computer.
f) Audio: Only support extender Audio, this camera don’t support Audio 4.3.5 SettingPTZ Function a) PTZ protocol, Auto Tour & Preset: Reference page XXX 4.3.6 Setting Alarm & Record (This PTZ camera without external Alarm and SD card, which can record in SD Card and playback. You can use HCMS or add a NVR for recording and Playback) 4.3.
4.3.
5. HCMS View 5.
b) Click ”Config Manager” , go to “ Device manage” (as picture) - 22 -
c) Click “ Search Device” to Search Camera IP Address REMARK: Please check if your router’s gateway is the same with default IP camera. Otherwise, you should modify camera ip address to match your router’s gateway before you back to watch video.
d) Selected the searched IP address to “add” cameras, and put user name and password - 24 -
e) Return to the main interface and double-click the added IP address. 5.2 Record a) Setup Record Click to enter the recording plan settings. Select the length of the recording file according to your needs and click “Save”.
b) Record Storage Click Main Menu , you can change Pictures and video records’ path in computer. And setup others parameters. c) Enable Record and Playback: Back to CMS interface, click “manual record” to start record.
Playback: Click go to below picture, select device by IP address, Click “search” to find record, double click the video to playback 5.3 Remote View Once you are away the place which camera installed, you can view camera by remote.
b) Click “add manually” to add camera’s UID, user name and password, click “OK” to save.
6. View Live Video by App HiSee A) Download App. Go to Apple Store or Google Play to Search and Download App HiSee on your Device Or Scan the QR Code below to get the App B) Account Registration. You use your Facebook’s account access or use an email address to registered.
→ C) Automatic Add Camera to App. It will automatic to scan the camera under your network (make sure camera and your phone are under the same network), there will be Device Listing Showing, just click the camera (UID) and put camera’s username and password, then you can view your camera on Mobile.
→ D) Manual Add Camera to App.
You can scan the QR code on camera label or in IE (Setting– Network-P2P)，put camera’s username and password, then you can view your camera on Mobile.
Frequently Asked Questions Q1: What’s the user name and password? A: Both are admin Q2: I can’t read the Mini CD, where I can download the file. A: You can download it from our website by link: http://www.jidetech.com -->PRODUCT-->Security Camera --> P1 Q3: How to reset the camera? A: You should login camera in IE and go to “Setting SystemAdvancedFactory Settings” Q4: How to upgrade my camera? A: If there is no bug with camera, we don’t suggest to upgrade it.
Service Guarantee If you have any other questions, please visit the official website of Shenzhen Jide Technology Development Co., Ltd. or consult the customer service email address. Company Name: Shenzhen Jide Technology Development Co., Ltd. Company Address: Building 901, Building B, Niulanqian Building, Minzhi Avenue, Minzhi Street, Long Hua District, Shenzhen, Guangdong, China, 518109 Website: www.jidetech-cctv.com Email: cindyhe@jidetech.
JideTech Cameras Care Your Life, Let’s Care Our World! 一份注视，一份关爱，让 JideTech 摄像机关爱全球! www.jidetech-cctv.
