Installation Instructions

锁定/lock:Press for a shorter time the RideOn_Car lock

后退/back: Press for a shorter time the RideOn_Car Back

前进/forward: Press for a shorter time the RideOn_Car Forward

速度/speed:Press for a shorter time the RideOn_Car Change Speed

对码/code: Press for a longer time the RideOn_Car Match Code

左转/left: Press for a shorter time the RideOn_Car Left

右转/right: Press for a shorter time the RideOn_Car Right

Product Name: 2.4G Remoter Controller

Model No.: HL1818RC

PAGE 1
Product Name: 2.4G Remoter Controller Model No.
PAGE 2
电源+3V:Power +3V 加入电池,每一次使用必须按对码键,首先长按对码键 3 秒,然后指示灯闪烁,再打开接收器电源,将会自对对码,对码完成,指示灯常亮 Install the battery,First use it need to press the code key longer time about 3s,then the light flash,Second open the Receiver.it will be match it automatically.if match ok,the light on.
PAGE 3
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.