SEUIC Reference Manual AUTOID PAD Air Rugged Tablet PC AUTOID product manual Version 1.2 Jiangsu SEUIC Technology Co., Ltd.
Copyright notice The information contained in this manual is provided "as is" and is subject to change without prior notice. The company makes no warranties of any kind with respect to the contents of this manual, including, but not limited to, warranties of merchantability and fitness for specific purposes. The company shall not be liable for any errors contained in this manual or for any accidental or incidental loss arising out of the supply, execution or use of this manual or the examples therein.
Record of document issue Version Modify the content Revision number Modifiers date V1.0 Android 9.0 initial version of Chinese instructions 20190918 Jiang Mingan V1.1 Add options, and modify the graphics 20191202 Jiang Mingan, Zhou Zhen V1.2 Change the relevant content 20200610 Jiang Mingan, Zhou Zhen Jiangsu SEUIC Technology Co., Ltd.
目录 Chapter 1, notes for use ...............................................................................................................1 1.1 points to note for laser scanning engines .......................................................... 1 1.2 safety precautions.............................................................................................. 1 1.3 maintenance considerations ..............................................................................
7.8 sounds ............................................................................................................. 35 7.9 apps ................................................................................................................. 36 7.10 storage ........................................................................................................... 37 7.11 batteries ......................................................................................................... 38 7.
Chapter 1, notes for use 1.1 points to note for laser scanning engines Laser radiation, users should not look directly at the laser beam. 1.2 safety precautions Your equipment can only use the batteries and chargers specified by our company; use of other products may cause battery leakage, overheating, burst and fire. Do Not Short circuit charger, otherwise it will cause electric shock, smoke and damage to the charger.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1.3 maintenance considerations This product has the function of water-proof and dust-proof grade, but it should be avoided to operate in extremely high temperature, extremely low temperature or wet environment.
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Chapter 2, Appearance Introduction Figure 2-1 front view Figure 2-2 side view 4
Figure 2-3 back view 5
Chapter 3, the keyboard The new Pad Air device has a total of five keys, including three virtual buttons on the screen touchpad (Back, Home, Menu) and two buttons on the side of the device (power and volume) . Button description: Table 3-1 key presentation Push the button Primary function Function description Home Button Click to return to the home screen. Menu key Click on the task manager. Back key Click to return to the parent screen or exit the application.
Chapter 4, quick use 4.1 initial use Long press the Power key 3S to Power up, short press the Power key when the system is working, and the device will go into hibernation. 4.2 boot You can turn the machine on by pressing the power button. In deep sleep mode, short press the power button to wake up the system. If the machine is powered by a battery, make sure the battery is in contact and reliable. 4.
plug.
Figure 4-3 inserts Catto into the device Figure 4-4 fastening USB plug 9
4.6 install the memory card To install a memory card, follow these instructions: Place the memory card in the Kato as shown in figure 4-5. Insert Catto in figure 4-2,4-3,4-4. Figure 4-5 placement of Memory Card Note: 1. The PSAM card is not supported on this computer 2. The Native Sim card only supports Nano Cards. 3. This machine does not support dual SIM cards.
Chapter 5, on charging Since the battery only has a small amount of power for testing when it leaves the factory, it must be recharged before you use it when you receive the machine. 5.1 charging time BATTERY: It takes about 3.5 hours for the battery to be first charged through the adapter, and the LED lights turn red when charged and green when fully charged. 5.2 charging temperature The optimum operating temperature is 18 ~ 25 °C. Temperatures Below 0 °C or more than 55 °C will not charge the battery.
that the standby time of the device has been greatly reduced, please replace the battery. Battery charging time varies with temperature conditions and battery life. Please charge within a reasonable temperature range. When the battery is low, the device will pop up a low power prompt. When the battery is too low, the device will automatically shut down. 5.
Chapter 6,Main screen Find this icon and set it to use, click on the settings button in the upper right corner to enter the settings home screen, the new padAir default has two home screen, can be set ① ② ③ ④ Figure 6-1 home screen (Trebuchet) 13
Table 6-1 home screen items 1 Status Bar: displays notifications and status icons. 2 Display Area: for placing application icons, desktop folders, and widgets. 3 SHORTCUT BAR: Click to enter the corresponding application. 4 APP TRAY: Click or swipe up to go to the home screen to view all APPS. 6.1 status bar icons The status icon and notification bar icon at the top of the screen display device status information and notifications, as shown in the following table.
Chapter 7, settings 7.1 Wlan FIND THIS ICON: - Settings - Internet and Internet - WLAN WI-FI 2.4 g provides up to 450ft 150M, and 5G provides up to 300ft 100m of WiFi access. To use Wi-Fi on your device, you must connect to a wireless access point or hotspot. Note: Wi-Fi signal availability and coverage depend on the number, infrastructure, and other objects that the signal penetrates. Turn on Wi-Fi and connect to Wi-Fi 1. Click the WLAN off / on Button to enable Wi-Fi.
16
Figure 7-1wi-fi menu 4. Wlan Band Settings Wlan preference settings at the bottom-WLAN preferencesadvanced-WLAN advanced-WLAN band settings-WLAN band settings, select only 5 Ghz / 2.4 Ghz Band, only 5 Ghz / 2.4 Ghz Band of AP can be found. Figure 7-2 WLAN band Turn on the wireless Wi-Fi interface and touch scan.
displayed in the list of Wi-Fi networks. Touch another Wi-Fi network to connect to it 7.2 Bluetooth FIND THIS ICON: - Settings - connected devices - Connection Preferences - Bluetooth 1. Click the Bluetooth close / Open Button, click pair with new device, open and search other Bluetooth Devices; In the list of devices found, click on the device to which you want to connect; 3.
Figure 7-3 Bluetooth Menu Click the settings button on the right to rename and unpair a successful device, and you can do as needed: 19
Figure 7-4 Paired Bluetooth device settings 5.
Figure 7-5 Bluetooth transfer 6.
Figure 7-6 Bluetooth transfer progress bar 7. You'll be prompted when the file has been sent. Figure 7-7 Bluetooth shared results view 8. Bluetooth headset, the same pair with Normal Bluetooth, Bluetooth headset can be used for Voice Communications, multimedia playback and so on.
7.3Sim card FIND THIS ICON: - Settings - Internet and Internet - Mobile Network The main interface looks like this: Figure 7-8sim card interface 7.
- Internet and Internet - TRAFFIC USAGE Figure 7-9 traffic usage 24
7.5 more - Settings - Network and Internet - Advanced Figure 7-10 More Menus 7.5.1 flight mode When flight mode is checked, the wireless module will automatically shut down. 7.5.2NFC NFC, enabled, allows wireless data terminals to exchange data as they come in contact with other devices, as long as their device is attached to another NFC enabled device, you can share your apps with each other in sync. Third Party NFC software is also installed to read and write NFC cards.
Figure 7-11nfc features 7.5.3 ANDROID BEAM Android Beam is enabled, and devices can share files via Android Beam. 7.5.4 network sharing and portable hotspots (1) portable hotspot function, using the unit as a Wi-Fi hotspot to provide signal access to mobile phones and computers with Wi-Fi modules within a certain area of the vicinity.
Figure 7-12 modifying WLAN hotspots This interface allows you to click on the changes you want to make. 7.5.
Figure 7-13 VPN settings 7.5.6 mobile networks 1. Turn on: data traffic can be switched directly to the roaming state after entering the roaming environment.
Figure 7-14 mobile data network roaming 2. Preferred network type: After selecting the corresponding network type priority, the taskbar will display the corresponding network signal indicating g 2g priority, 3g 3G priority, 4g 4G priority, such as Unicom Card choosing network type 2G priority, devices will be forced to downgrade to 2G networks even in areas with 3G coverage.
Access Point Name, the general mobile default is cmnet, Unicom default is 3gnet, telecom default is ctnet, as shown in figure: Figure 7-16 access point APN 4. Add a dedicated APN, click this button, pop up the interface as shown below, general add name (custom) , APN (network access point) , user name, Password, etc. , press the Menu button to select save to complete the add, press the Menu key to choose to give up or press the Back key to return directly can give up to save.
reset settings button, jump to confirm the reset network settings interface, click on the reset settings, prompt reset success, as shown in the following figure: 31
Figure 7-17 resetting network settings Note: 1. The device is connected to Wifi. After resetting the network settings, the device clears the AP Password and disconnects 2. Turn off the enhanced 4G LTE mode in your mobile data network and turn on the enhanced 4G LTE mode by default when you reset the network 3, Bluetooth Default name changes, has been paired, reset the network after the device Bluetooth Name Recovery, Bluetooth pairing off 7.6 display FIND THIS ICON: - Settings - Display 1.
Figure 7-18 shows 2. Wallpaper, enter, you can set the wallpaper source to be modified, library, album or memory card on the picture, wallpaper: The system default with pictures. Figure 7-19 wallpaper 3. Automatically rotating screen, select the direction of rotating screen content, equipment rotation, according to the rotation angle for horizontal, vertical screen conditions.
Figure 7-20 auto-rotating screen 4. Sleep, the system sleep time to change the settings for the time, the system will automatically sleep. Figure 7-21 dormancy 5. Font size, according to their own needs to adjust the system font size, divided into small, default, large, maximum.
7.7 notification FIND THIS ICON: - Settings - Applications and notifications The settings for an application notification message are notification, default application, application permissions, and special application permissions. HERE'S THE CHART: Figure 7-23 notification 7.8 sounds FIND THIS ICON: - Settings - Sound Volume, ring tone, and default notification tone settings.
like: Figure 7-24 sounds 7.9 apps FIND THIS ICON: - Settings - Applications and notifications Management application. Go to the interface, click the application you want to uninstall, and you will enter the following application information interface, click uninstall, and then you can remove the application from the device.
Figure 7-25 application 7.10 storage FIND THIS ICON: - Settings - Storage To see the available storage space, clear the memory card (format the Ram) and select the option to perform a media scan on the external memory card or external USB device.
Figure 7-26 storage 7.11 batteries FIND THIS ICON: - Settings - Batteries You can see the current capacity of the battery and whether the on-off status bar shows the charge.
Figure 7-27 batteries 7.12 location information FIND THIS ICON: - Settings - Security and location information Check Google's location service, turn on GPS, and download your own third party location software.
Figure 7-28 location information usage rights 7.13 clear FIND THIS ICON: - Settings - Security and location information Set screen lock, Display Password, Device Manager, application actions, unknown source, unknown source application installation password settings, trusted credentials, etc. .
Figure 7-29 safe 7.14 accounts FIND THIS ICON: - Settings - accounts Create an account and sync information (you can sync contacts, calendars, etc. to other products in the cloud, you need to set up accounts and server side) .
Figure 7-31 adding an account 7.15 language and input methods FIND THIS ICON: - Settings - language and input methods Language selection, text input and auto error correction options, select your favorite keyboard and input method, and set the text to language output, pointer speed, if you install other input method, will be displayed in this interface.
Figure 7-32 language and input method 7.16 backup and reset FIND THIS ICON: - Settings - backup and reset Back up or restore data to factory settings.
Figure 7-33 restore factory settings 7.17 date and time FIND THIS ICON: - Settings - date and time You can use the time or time zone provided by the network, or manually set the date and time, select the time zone, or you can choose the time and date display format.
Figure 7-34 date and time 7.18 accessibility FIND THIS ICON: - Settings - Accessibility Here you can set zoom gestures, high-contrast text, press the power button to end a call, mono audio, color inversion, color calibration, and touch and hold delays.
Figure 7-35 accessibility 7.20 developer options FIND THIS ICON: - Settings - developer options Set-for Wireless Data terminal-version number, click the version number several times to open the developer option, then get some other information on the device, android general.
Figure 7-36 developer options 7.
Figure 7-37 on wireless data terminals 1. The Sim Status Information can view the current network, signal strength, Imei number, etc. as shown in figure 7-39 2. Model number: display the model number of the machine; Function number: display the function number of this machine; 4.
6. TOUCHSCREEN firmware version number: Touchscreen version number; 7. Device serial number: display the local S / N Number; Kernel version: Device Kernel Information; Version number: device system software version.
Chapter 8, introduction of typical application 8.1 scanning tools 1. Find this icon , open the interface into this scan can be normal scan. Figure 8-1 scanning tool home screen 2.
Figure 8-2 Bar Code Settings 3.
Figure 8-3 basic settings Open application settings to set the basic scan switch, as shown in figure 8-4: (1) scan sound: Open the scan will sound prompt; (2) vibration: If opened, the scanner will vibrate to prompt; (3) Bar Code append: Open Bar Code can be continuously output; (4) auto-erase: The last Barcode will be automatically erased when the Barcode is scanned; (5) BOOT AUTO-START: When the BOOT is started, the scanning program will be opened automatically; (6) display bar code type: when the Bar Co
(11) Bar Code suffix: can add bar code output suffix (can be numbers, letters, special characters, etc.) ; (12) Bar Code Prefix: can add bar code output prefix (can be numbers, letters, special characters, etc.
Figure 8-4 application settings Figure 8-5 restores bar code default settings 54
Figure 8-6 developer items 5.Program hide or exit (1) select [ hide ] , the program is run in the background, in any editing interface by scanning parts can be scanned; (2) select [ Exit ] , the program will exit close.
8.2 System upgrade This application enables remote upgrades for the convenience of customers. Find this icon and go to system upgrade, as shown below: Figure 8-9 system upgrade When the network is clear, click the check update button. If there is no update, it will prompt you to find the latest version. If there is an update, it will prompt you to find the new version, click on the download screen, as shown in figure.
Figure 8-10 check for updates and downloads Click download, after the download is successful, click update immediately, the device automatically restarts to upgrade status, as shown in figure: System upgrade settings, as shown in figure: 57
Figure 8-13 system upgrade 8.3 Mobile Butler This product is designed to enable users to set android handheld terminal permissions and not allow users to use non-specified applications.
Figure 8-14 default launcher The administrator sets and modifies passwords (1) move the housekeeper interface, Short press the lower right corner of the three points (Menu) button to add desktop project operations.
Figure 8-16 initial password settings Set the administrator initial password as required, for example: 123456, click the confirm button, the password is set successfully. Note: Can Not Be Blank and the updated password field must be the same as the confirmation password field. (2) short press the Menu button Enter the appropriate administrator Password (123456) .
Figure 8-19 main interface (3) administrator, Password Change Add the application interface, click on the top right corner [ settings ] to enter the settings interface, click on [ change Password ] to change the password screen: 61
Figure 8-20 change password (4) administrator, name change Go to settings and Click Mobile Butler to change the name of the Mobile Butler.
Figure 8-22 wallpaper modification (6) remove the default launcher settings Method 1: Enter [ settings ]-[ application ]-select [ reset application preferences ] , Click [ reset application ] can be lifted.
Figure 8-23 deactivating default launcher setting 1 Method 2: The Mobile Butler setting interface will be"Mobile Butler boot selfstart"modified to"Mobile Butler boot self-start", as follows: 64
Figure 8-24 deactivating default launcher setting 2 Note: Method 2 is recommended, and method 1 resets other application settings as well 8.4 quick configuration In order to realize the same type of equipment, this application copies the configuration information of one equipment quickly to another equipment, making the related configuration of two equipment exactly the same. Configured import operations can not be implemented between different models of devices.
QR code,click to open it Figure 8-25 shortcut configuration home screen 8.4.1 import 1. File Import Will meet the conditions of the configuration pack placed in the External SD card specified directory, you can achieve. External SD Card System Path is: External SD card / SysSetting / setinfo. Tarr. Gz. (1) manual import: 1) place the configuration pack (file name Setinfo.tar.
Figure 8-26 configuring the ZIP directory 2) go to the shortcut configuration, Click [ file import ] , pop up the following prompt, Click [ confirm ] ; Figure 8-27 file import 3) after successful import, pop-up file import project and status, click confirm, pop-up restart prompt, click [ restart immediately ] can be completed (without restarting 67
some configuration will not take effect immediately) . Figure 8-28 file configuration import successful 2. Qr Code Import This function can scan the form of Qr Code to import external configuration files, you can call camera scan other external qr code to import configuration files.
Figure 8-29 Qr Code Import Window (2) scan transfer successful, pop-up Qr code import items and status, click confirmation, pop-up restart prompt, click [ restart immediately ] can be completed (without restarting some configuration will not take effect immediately) .
Figure 8-30 Qr code import successful 8.4.2 export 1. File export This function will be the local import and export tools in the configuration of all configuration items can be exported to the local internal SD card or external SD card specified directory. The name of the export file isSetinfo.tar.gz. 。 The Path to the export file is: a )External SD card / SysSetting / b)SD Card / SysSetting / Where the device has an External SD card, the file export priority placed in the External SD card.
Figure 8-31 file export The exported file is called SETINFO. Tarr.
Figure 8-32 file export path 2. QR Code Export The QR Code is exported to generate the qr code, which is scanned to connect to the Bluetooth Channel and transfer the configuration file.
Figure 8-33 Qr code export (2) the generated Qr Code picture in the bottom of the application, click on the Qr code small icon, you can view.
8.5 feature settings This application is used for the quick realization of the special needs of customers, to facilitate the quick use of customers. Figure 8-37 feature settings 8.5.1 no state drop down This function is enabled This function takes effect immediately and can not be pulled down from the menu. This function is disabled The function takes effect immediately and can be pulled down normally 8.5.
In some cases, disabling applications such as the Telnet program passes all the keys pressed to the server 8.5.3 display the scan hover button This function is disabled The scan hover button does not appear below the interface This feature is turned on The scan hover button hovers below any interface of the device. Click the scan head to highlight the normal scan bar code 8.5.
Figure 8-38 white list of digital certificates Import certificates from APK files The application searches all the APK files in the internal storage device directory and displays the file name and directory. The certificate from the selected APK file can be imported into the system by clicking the import button after checking the single or multiple display items.
Figure 8-39 APK file import list IMPORT CERTIFICATES FROM INSTALLED PACKAGES The APP displays the name of the installed third-party APP and its package name, and the user can import the certificates from the selected APK file into the system by clicking the import button after checking the single or multiple display items.
3. REMOVE CERTIFICATES FROM THE WHITELIST The application displays the name of the added certificate. Check single or multiple display items and click remove to remove the corresponding certificate from the system white list. The item that appears grey and unchecked is the system's default certificate and can not be removed. Figure 8-41 signature whitelist category Points to note: The added certificate will be named after the package of the APP.
Rechargeable battery longer charges no There's no sound The new PADAIR SHUTS ITSELF DOWN New padAir reads Bar Code undecoded System Failure Perform a soft reset Battery failure Return to factory for repair and replacement of batteries Battery temperature too / too low Keep the battery at room temperature Volume set too low or turned off Adjust the volume The new padAir is inactive After a period of inactivity, the mobile data terminal closes.
UNABLE TO USE MOBILE DATA TO ACCESS THE INTERNET space" storage locations Mobile data not enabled Go to settings and enable the data network Incorrect Network Mode selection, unregistered SIM card Go to the settings and select the correct network mode Sim Card debt Recharge the SIM card in a timely manner 80
INTRODUCTION OF OPTIONAL ACCESSORIES Please keep the original packing box and packing material for future maintenance or storage of the machine. The following accessories can better improve your work, you can buy according to need. A new PADAir series product One USB cable (one USB TYPE A, one USB TYPE C) One QC3.