Instruction Manual

Table Of Contents
:DC5V
:DC5V /500MA
≥10米
:450±50mV
≥85dB
:40HZ-18KHZ
:<1%
:MAX10W
1台
使 1份
电USB线 1条
1、
2、止8岁使
3、使
4、
使
寿
使
式/模
绿
30闭,
3
3
LED
绿
Music mode/mode switch
Music switch
Music control area
Volume down
Voice control function
(three effects)
Red light
Red, Green and Blue mixed
color lighting
Timing (Turn off after 30 minutes,
White flash 3, timing successful,
red flash 3, timing cancelled)
Light switch:short
press to turn off
LED light, long press
to turn off laser light
Colorful lighting
automatic control
mode
Sleep breathing
light
U
1
2
3U
4
5
1开/关OFF
ON机,开
2 开/关
开/关LED
3 曲/音 放/暂
曲/音
1Bluetooth
LED
2
XKL-Q5
3
Biuetooth
4
U
LIGHT
MODE
LIGHT
MODE
/v -
/v -
Starr y sky projection light instruction manual
4. Play music operation
When the machine starts up, it will automatically detect
and identify the external device. After starting up, it will
enter the Bluetooth mode by default and insert the USB flash
drive to automatically recognize and play. The latter is
preferred.
5. Indicator light introduction
5.1 Red indicator light: charging indicator light indicates
that the red light is on when the battery is fully charged
and the red light is off.
5.2 Blue indicator light:Bluetooth,USB flash mode indicator;
Low power shutdown indicator light.
1. Basic functions
1.1 7 Colorful lights
1.2 Bluetooth Music
1.3 usb drives play MP3 music
1.4 Water wave laser star pattern light
1.5 Built-in charging (optional)
2. Functional description
2.1 On/OFF: Switch the product to the "OFF" position
to shut down the product; Hit the "ON" position,
and the product will start up. The default startup
mode will be Bluetooth, and the stage lights will be
dazzled.
2.2 Mode switch: long press the key to turn on/off
laser light, short press the key to turn on/off
LED colorful light;
2.3 Music control: previous music/Volume reduction
button; Play/pause button; Next song/Volume
down button;
3. Bluetooth connection method
3.1 Start up or press the mode key to switch into Bluetooth
mode, and the Bluetooth will be emitted, and the LED
indicator light will flash.
3.2 Turn on the Bluetooth function of the mobile device
(mobile phone, computer, etc.) and search for the
Bluetooth device "XKL-Q5".
3.3 Click manually, the device automatically matches and
connects, and the successful connection will emit a
"Biuetooth" sound.
3.4 If the device has been successfully paired, the next
switch will automatically connect.
LIGHT
MODE
LIGHT
MODE
/v -
/v -
6.Function introduction of remote Control
Color selection
Volume increase
Green light
Blue light
Motor speed regulation
7. Technical parameters
Working voltage: DC5V
Charging voltage: DC5V /500MA
Bluetooth distance: 10 m
Input sensitivity: 4550mV
Signal to noise ratio: 85dB
Frequency response: 40HZ-18khz
Distortion: <1%
Power : MAX10W
8. Packing list
Starry sky projection lamp 1 PCS
Operation instruction 1 PCS
USB cable 1 PCS
Special remarks
1. As laser is harmful to the eyes, you should not look
directly at laser light with your eyes.
2. Children under 8 years of age are prohibited from
using the product alone without adult supervision
(except for non-laser type).
3. Please turn off the power when no one is using it for
a long time.
4. When the batter y is low, the system will shut down
automatically. Please charge it in time: if you do not
use the unit for a long time, you can charge it at least
once a month, which can protect the battery and
extend the battery life.
195* 95mm
COL OR
Remote c ontrol
COL OR
Remote c ontrol

Summary of content (2 pages)