Tally Dascom 2610 6.3.20 Password The Password page allows the user to set a password which would limit access to certain configuration and action links in WebPanel. The maximum number of characters for the password is 7. The default password is no password at all (“null“). However, “adm” is also acceptable as the default password to be compatible with the TallyCom IIF-4 and external TallyCom pocket NICs (Options), which use this as the default password.
Tally Dascom 2610 6.3.23 Email Notification With the email notification link the user will be able to set up and receive email notices for error and status conditions of the printer. Up to 4 email addresses can be set. The page looks like this: The user must set up the SMTP Mail Server as well as one or more users. The Reply address can be left as is unless there is reason to have to mail to the Reply address. To activate the mail notification: Select which notifications are to be sent out.
Tally Dascom 2610 The “Configure” link at the end of each line of notification options allows the user to set up the message information for the email as well as selecting other pertinent information to be added to the email. In addition, the timer can be set which determines when the email notification is sent out. The page looks like this: In this example, the Online message is set to “Printer is Online”, and information on Description, Location, and Printer Name will be added to the email.
Tally Dascom 2610 6.3.24 Logical Printers The logical printers page will add text or commands to the beginning and ending of print jobs. This is done by pre and post strings, defined in each of the logical printers. For entering binary data in these strings, the backslash character is used followed by 2 hexadecimal digits. Examples of this are \1b for an escape character, \0a for linefeed and \\ for backslash.
Tally Dascom 2610 When selecting one of the logical printers under the Description column, the following page is displayed: In this example if the Enable checkbox is checked, the pre-string of “Beginning to print job” followed by a CR/LF will print at the beginning of every job sent to this LPR Queue. At the end of the print job, the message “End of job” with a formfeed will print. Unchecking the Enablecheckbox will not send the pre or post strings.
Tally Dascom 2610 6.3.25 Logout of TallyCom The Logout link disconnects the browser session from the printer. Clicking on the “Home” link reestablishes the connection. 6.3.26 Restart TallyCom Selecting this link will reboot the printer and disconnect the current printer connection. It is used to reset certain TCP/IP variables that were set in the General and TCP/IP pages. Once TallyCom has restarted, those new setting will take effect.
Tally Dascom 2610 6.3.27 Virtual Control Panel The Virtual Control Panel link is in the Printer Status area of the web page. This control panel is a visual representation of the actual control panel on the printer. It allows the user to remotely read and set panel information as if they were standing at the control panel. The functionality of the virtual panel is identical to the physical LCD panel.
Tally Dascom 2610 7 Addendum 7.
Tally Dascom 2610 IBM character set 1 IBM character set 2 75
Tally Dascom 2610 OCR-A character set 2 76
Tally Dascom 2610 OCR-B character set 1 OCR-B character set 2 77
Tally Dascom 2610 International Character Set Commands Country Basic Command USA FRANCE GERMANY UK DENMARK 1 SWEDEN ITALY SPAIN 1 JAPAN NORWAY DENMARK 2 SPAIN 2 LATINAMERICA DENMARK/NORWAY CHINA <ESC>“R”CHR$(0) <ESC>“R”CHR$(1) <ESC>“R”CHR$(2) <ESC>“R”CHR$(3) <ESC>“R”CHR$(4) <ESC>“R”CHR$(5) <ESC>“R”CHR$(6) <ESC>“R”CHR$(7) <ESC>“R”CHR$(8) <ESC>“R”CHR$(9) <ESC>“R”CHR$(10) <ESC>“R”CHR$(11) <ESC>“R”CHR$(12) <ESC>“R”CHR$(13) <ESC>“R”CHR$(16) International character sets: 78
Tally Dascom 2610 7.2 Control Codes Summary The following table shows sequences marked by a √ if they are available in the various emulations. The MTPL sequences can be used within all emulation modes. The corresponding sequences are marked by a *. If you want to learn more about control codes, we recommendto download the Programmer’s Application Manual from our internet support pages.
Tally Dascom 2610 IBM XL24 IBM AGM √ * * * √ * * √ * * MTPL Epson Epson LQ-2550 LQ-2170 Code Function * (.
Tally Dascom 2610 MTPL √ IBM XL24 * √ IBM AGM Epson Epson LQ-2550 LQ-2170 √ √ * √ * √ * √ Function √ √ √ *<4> Set graphics print to 80 dpi √ √ √ *<40> Set graphics print to 360 dpi * √ *MI>F Assign character set G2 √ - Underlining ON/OFF √ / Select vertical tab channels .
Tally Dascom 2610 IBM XL24 IBM AGM √ * * * √ * * * MTPL Epson Epson LQ-2550 LQ-2170 Code Function * [?7l Line overrun = Truncating data outside of the printing area * [?~ Change emulation √ √ [@ ... Set double height √ √ [\ ...
Tally Dascom 2610 IBM XL24 IBM AGM √ * * * √ * * √ * √ √ MTPL Epson Epson LQ-2550 LQ-2170 Code Function * [16m Font 6 Default: Script LQ * * [17m Font 7 Default: Prestige LQ * * * [18m Font 8 Default: OCR-B LQ * * * * [19m Font 9 Default: OCR-A LQ * * * * [1 g Clear vertical tab at current position [ 1 SP k Printout in Royal Mail customer barcode √ * * * * [1 SP L Set vertical spacing to 4 lpi √ * * * * [1 SP p
Tally Dascom 2610 IBM XL24 IBM AGM √ * * * √ * * √ * √ Epson Epson LQ-2550 LQ-2170 Code Function * [4m Underline ON * * [4 SP L Set vertical spacing to 8 lpi * * * [4w Set 10 cpi * * * * [4y Selecting NLQ printing quality at 10 cpi √ * * * * [4z Line density 8 lpi (= line spacing 1/8 inch) √ * * * * [5{ Select fanfold paper mode tractor 1 √ * * * * [6{ Select fanfold paper mode tractor 2 √ * * * * [50m Propo
Tally Dascom 2610 MTPL IBM XL24 IBM AGM Epson Epson LQ-2550 LQ-2170 Code Function √ [g <2> Set graphics print to 120 dpi √ [g <3> Set graphics print to 240 dpi √ [g <8> Set graphics print to 60 dpi √ [g <9> Set graphics print to 120 dpi √ √ [j Position paper back 1/180" √ * * * * [ f Set absolute horizontal and vertical position √ * * * * [+w Interface holding time n = 1 - 30 s √ * * * *
Tally Dascom 2610 MTPL √ IBM XL24 IBM AGM * * Epson Epson LQ-2550 LQ-2170 Code Function [ v Set vertical tab [\ Perform relative horizontal step √ \; Transparent mode for the characters following √ ^ Transparent mode for the character following √ _ Overline ON/OFF 0 Set line feed to 1/8 inch 1 Set line feed to 7/72 inch 2 Set line feed to 1/6 inch 2 Set line feed to n/72 inch 3 Set line feed to n/180 i
Tally Dascom 2610 MTPL IBM XL24 √ IBM AGM √ Epson Epson LQ-2550 LQ-2170 Code Function √ √ Double-wide printing ON √ √ Set character spacing √ √ t Select character set √ √ √ √ T Superscript or subscript OFF √ √ √ √ U Unidirectional print ON/OFF √ √ Un Unidirectional print ON/OFF √ √ W Continuous double width ON/OFF √ √ w Double height print ON/OFF √ √ x Set print quality (PQ) √ √ x
Tally Dascom 2610 7.2.1 PJL commands These PJL commands can be used with internal Ethernet interface as well as with external TallyCom III Pocket interface. This functionality may be activated via the parameter Jobcntl in the Advanced Menu.
Tally Dascom 2610 7.2.
Tally Dascom 2610 7.2.5 Royal Mail Customer barcode The Royal Mail Customer barcode is a special Mail type barcode. It is printed in character size. Numeric values from 0 to 9 and alpha- numeric values from A to Z are printable. After activating this barcode type, numeric characters from 0 (hex.30) to 9 (hex. 39) and alphanumeric values from A (hex. 41) to Z (hex. 5A) are interpreted as barcode figures. Lower cases from a (hex. 61) to z (hex. 7a) are automatically converted to capital characters.
Tally Dascom 2610 7.2.8 LC printing Certain professional applications may require unusually Large character sizes. Therefore your printer has the possibility of scaling standard size characters up to factor 99 by means of control sequences (LCP*). The Header sequence defines the parameters (e.g. height) once. This definition remains until the printer is switched off. The printable LCP* information is transmitted in an LCP “bracket” (SI).
Tally Dascom 2610 7.2.9 List of additional control Codes You can use both the ESC sequences and the control codes Sequences [?10~ Control codes Function — Barcode Off [?11~ — Barcode On PSC 0 \ — Unsecured mode PSC 1 \ — Secured mode LCP PLS \ — character set [s — Sends a character as ASCII character; n > 0–255 decimal [20s Barcode bracket [16s Start code LCP Header [25s Termin
Tally Dascom 2610 7.3 Interfaces Specifications Your matrix printer offers connectivity via a parallel interface, USB and Ethernet interface. Serial I/O RS232C interface is an option. This appendix informs you about the parallel Interface, USB, Ethernet interface and optional serial interface RS232C, and describes the communication between your computer and the printer. These interfaces are linked to form a called shared interface.
Tally Dascom 2610 7.3.1 Parallel I/O IEEE 1284 The bidirectional parallel interface offers the “nibble” mode of IEEE1284 interface. This enables installation in accordance with Windows “Plug & Play”. The standard parallel interface is able to transfer data at a speed of max. 30, 000 bytes per second. When the receiving buffer is full, the data input is blocked until the data buffer is empty. Connector assignment Connector no.
Tally Dascom 2610 7.3.2 Ethernet I/O 10/100 Mulitprotocol The Ethernet interface enables the printer to connect to local area networks. It's attributes are: Hardware Supported operating Systems Supported Protocols Designation of IP Address Configuration Status Management Setup LAN/Ethernet: RJ45, Ethernet 100BaseTX with 100 Mbps (IEEE802.3u), 10Base-T with 10 Mbps (IEEE802.
Tally Dascom 2610 Example of a Printer connected to a computer in an Network ◆ The assumed address space corresponds to the TCP/IP address, class C, 192.168.1.xxx. ◆ The subnet mask to be used is 255.255.255.0. ◆ The address of the router, or gateway, is 0.0.0.0, if not available. Example of several devices in an Ethernet 7.3.3 USB 2.0 I/O – Full Speed The USB interface conforms to the Universal Serial Bus 2.0 Specifications. It supports the Full Speed mode at12 Mbps. It uses the “B” type USB connector.
Tally Dascom 2610 7.3.4 Optional Serial Interface RS232C Your printer’s serial interface supports the RS232C specification. The signals are received and transmitted by a 9 pin connector. Basically 3 lines are enough for exchanging information between computer and printer (one receive line, one send line, one line for common grounding).
Tally Dascom 2610 1) The serial cable length must not exceed 15 meters. 2) Make sure the “Interface Setup” selects serial interface and the settings are the same as PC communication port settings.
Tally Dascom 2610 Interface cable (serial interface) The cables used must be shielded. The cable shield must be connected to the connector shield on both ends. PC/AT(9 Pin) Printer(9 Pin) RxD 2 3 TxD TxD 3 2 RxD CTS 8 4 DTR/RDY SG 5 5 SG DSR 6 DTR 4 PC/AT(25 Pin) FG 1 TxD 2 RxD 3 CTS 5 SG 7 DSR 6 DTR 20 Printer(9 Pin) FG 2 RxD 3 TxD 4 DTR/RDY 5 SG It depends on the menu setting whether DTR or RDY (Ready) is active at Pin 4.
Tally Dascom 2610 Protocols ◆ Memory mode XON/XOFF The received characters are stored in a FIFO buffer (first in/first out). The characters are processed in this buffer. The buffer capacity can be adjusted from 0 to 128 Kb. If the buffer is full, the interface signals NOT READY (signal acknowledgement: Level 1, -12 V) and XOFF (hex. 13, dec. 19). This results in stopping the data transmission. When the FIFO buffer is empty again, the interface signals READY (level 0, +12 V) and XON (hex.11, dec. 17).
Tally Dascom 2610 ◆ ENQ/STX protocol In addition to this XON/XOFF message, the possibility exists of requesting a status byte from the printer using the ENQ code (hex. 05, dec. 5). The STX code (hex 02, dec. 2) is used to clear any error messages (parity error, buffer overflow).
Tally Dascom 2610 8 Options and accessories The following options can be ordered for your printer. 8.1 Options Tractor Unit 2600 Tractor Unit 2600 Name Part no. Second Tractor for push and pull position (rear, top and front installable). 99992 Tractor Unit 2610 Tractor Unit 2610 Name Part no. Second Tractor for push and pull position (rear, top and front installable). 99993 Serial Interface 2600/2610 Serial Interface 2600/2610 modules are available. Name Part no.
Tally Dascom 2610 8.2 Consumables Ribbon Cassettes Ribbon Cassette are available in the following versions. Name Part no. Ribbon cassette monochrome black for narrow Model 99061 Ribbon cassette monochrome black for wide Model 99071 Refill Kits Refill Kits are available in the following versions. Name Part no. Refill Kit monochrome black fabric for narrow model, on demand 99002 Refill Kit monochrome black fabric for wide model, on demand 99072 8.
Tally Dascom 2610 9 General Specifications 9.1 Printer Specifications Print System Mono-chrome serial impact dot matrix Print Technology Uni-/bi-directional logic seeking for text and graphics Print Head Number of pins: 24 pins (2 x 12; staggered) Firing frequency: Normal mode: 2 kHz Pin diameter: 0.
Tally Dascom 2610 Tab Speed Graphic Densities 50 ips Horizontal: 60 / 72 / 80 / 90 / 120 / 180 / 240 / 360 DPI (dot per inch) Vertical: 90 / 180 / 360 DPI Narrow version Print width Wide version 10 CPI: 80 CPL 136 CPL (characters per line) 12 CPI: 96 CPL 163 CPL 15 CPI: 120 CPL 204 CPL 17.
Tally Dascom 2610 Fanfold paper: Front or rear in, top out For details enter the Paper Specifications – 9.
Tally Dascom 2610 operation MTBF: 15000 hours @ 25% duty cycle Certifications CE, UL, FCC, Energy Star, 107
Tally Dascom 2610 Draft Roman Sans Serif Courier (incl.
Souvenir Gothic Orator Script Prestige OCR-A Courier (incl.
Tally Dascom 2610 9.3.
Tally Dascom 2610 10 Maintenance Your printer requires very little care. Occasional cleaning and replacement of the ribbon cartridge are all that is required. Cleaning is recommended approximately every 6 months or 300 hours of operation, whichever is sooner. Lubrication of the printer is not usually necessary. If the print head carriage does not move smoothly back and forth, clean the printer in the manner described in this chapter. If the problem continues, contact your dealer.
Tally Dascom 2610 10.2 Troubleshooting Your printer is extremely reliable, but occasionally problems may occur. This chapter provides information on some of the common problems you may encounter and how you may solve them. If you encounter problems that you cannot resolve, contact your dealer or service partner for assistance. 10.2.1 Print Quality Problems and Solutions Problem Printing is too light or too dark. Smears and stains appear on the page.
Tally Dascom 2610 10.2.2 Paper Handling Problems and Solutions Problem Paper cannot be loaded or fed. Paper jams while loading. Paper jams while printing. Paper slips off the forms tractors or the perforated holes of the paper tear during printing. 10.2.3 Solution • Make sure that the paper select lever located on the top right of the printer is set correctly. • Turn off the printer and remove the jammed paper. Remove any obstructions from the paper path.
DASCOM REPRESENTATIVES GERMANY DASCOM Europe GmbH Heuweg 3 D-89079 Ulm Deutschland Tel.: +49 (0) 731 2075 0 Fax: +49 (0) 731 2075 100 www.dascom.com UNITED KINGDOM DASCOM GB Ltd Hart House,Priestley Road, Basingstoke, Hampshire RG24 9PU, England Phone: +44 (0) 1256 481481 Fax: +44 (0) 1256 481400 www.dascom.com SINGAPORE (ASIA PACIFIC) DASCOM AP Pte Ltd 21 Bukit Batok Crescent #29-81,WCEGA Tower Singapore 658065 Phone: +65 6760 8833 Fax: +65 6760 1066 www.dascom.