CD MINI STEREO SYSTEM Model: OND19AAA12 PRODUCT GUIDE Ver.
Information & Safety Instructions Customer Service For any product related questions, please call us at: 1-888-999-4215. Important Safety Instructions • • • • • • • • • • • • • • 2 Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Additional Warnings and Precautions • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely. • WARNING: Shock hazard - Do Not Open.
Table of Contents Warranty & Safety Instructions ������������������������������������������������������������������������������������������������������������������������������������������������ 2 Setup ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 5 Connecting the Speakers Power Orientation �����������������������������������������������������������������������
Setup Connecting the Speakers Connect the included speakers to the Speaker Outputs on the back of the unit. The Right speaker should be connected to the Right output. The Left speaker should be connected to the Left output. Power Plug the DC power adapter into a standard wall outlet and the DC Power Input on the unit.
Orientation Front CD Door Speakers Remote Sensor CD Door Open Power ON/OFF Source Stop Press to change the media source. Volume 6 Play/Pause/Pair Repeat Skip/Tune Press to play or pause an audio track. Press to repeat play on the current audio track. Press and hold to begin pairing to a Bluetooth device (BLUETOOTH MODE). Press to program a CD. Press to skip audio tracks. Press and hold to scan radio frequencies (FM MODE). Press to fine tune the frequency adjustment (FM MODE).
Rear DC Power Input Headphone Jack (3.5mm input) Line In (3.
Orientation Remote 1. Power: Press to power the unit on or off. 2. CD: Press to switch to CD Mode. 3. Mute: Press to mute volume. 4. BT Pair: Press to begin pairing to a Bluetooth device. 5. FM: Press to switch to FM Radio Mode. 6. Aux/Line In: Press to switch to a connected audio system or device. 5 7. Play/Pause: Press to play or pause audio (CD/BLUETOOTH MODES). 8 8. Skip/Tune: Press to skip audio tracks (CD/ BLUETOOTH MODES). Press and hold to scan FM radio frequencies (FM MODE).
Remote Battery Requires 1 CR2025 button cell battery (included). Follow the figure on the back of the remote to replace the battery.
CD & Radio Loading & Playing a CD Note: This unit is not compatible with MP3 CDs. 1. Press the Source button to switch to CD Mode radio mode. 2. Press the Open button to open the Disc Door. 3. Load a CD or CD-R/RW disc into the unit, label side facing toward you. 4. Close the Disc door. 5. Press the Play/Pause button to begin playing the loaded CD. Press the Skip buttons to cycle through different tracks. Press and hold the Skip buttons to search through an audio track. Programming a CD 1.
Connecting Devices to the Speaker Connecting to Line In Requires a 3.5mm audio cable (not included). 1. Connect a 3.5mm audio cable to the Line In on the unit and the audio output/headphone jack on a smartphone or other media player. 2. Press the Source button to switch to Line Mode. 3. Use the controls on the connected device to select and play audio.
Connecting Devices to the Speaker Connecting to a DVD/Blu-Ray Player, Gaming Console, etc. Requires an RCA stereo audio cable (not included). 1. Connect an RCA stereo audio cable to the Aux In (RCA stereo) inputs on the unit and the RCA stereo outputs on the media player. 2. On the speaker, press the Source button to switch to Aux Mode. 3. Audio from the connected media player will now be heard through the speaker. Use the speaker controls to adjust the volume level.
Headphone Jack Requires a 3.5 mm audio cable (not included). • Connect headphones to the Headphone Jack on the rear of the unit. To avoid hearing damage, be sure the volume on the projector is turned down before connecting headphones, then gradually increase the volume to a comfortable level.
FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.