Wireless Home Music System User’s Guide for Model IHCTB627CW v1831-01 IHCTB627CW-IB -Lab.
Safety Instructions & Warnings CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE D' ÉLECTROCUTION NE PAS OUVRIR WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Important Safety Instructions • • • • • • • • • • • • • • Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Table of Contents Setup ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 5 Includes Power Speakers Orientation ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 6 Features & Controls Remote Control �����������������������������������
Setup Includes • Remote control with CR2025 battery • 45 rpm adapter • User's Guide SPEAKER OUTPUT R L AUDIO OUTPUT R L FM ANT. 120V~60Hz Power Plug the built in AC power cord into a standard wall outlet. AUDIO OUTPUT R L AUDIO OUTPUT R L Speakers Connect the speaker wires to the speaker inputs on the turntable. Be sure to match the positive (red) and negative (black) wires to their corresponding inputs. 5 IHCTB627CW-IB -Lab.
Orientation Features & Controls Dust Cover SPEAKER OUTPUT L R AUDIO OUTPUT R L Audio Output Connect to send audio signal to an external source. FM ANT. 120V~60Hz Cassette Player Speaker Output Connect included speakers here. FM Antenna Speakers Remote Receiver Display Volume VOLUME MIN CD PLAYER OPEN / CLOSE / – TUNE / SKIP + POWER AUX IN Aux In (3.
45 rpm Record Adapter Tone Arm Lift Switch Turntable Tone Arm Lock Tone Arm & Stylus Auto Stop Select ON or OFF. Record Speed Choose 33, 45, or 78, depending on the type of record to be played. 7 IHCTB627CW-IB -Lab.
Remote Control Functions Power Press to power the system ON or OFF. Source Press to set the media source. Repeat 1/All Press to repeat 1 audio track or all audio tracks on a loaded CD. Stop Press to stop and audio track. Skip/Tune Press to skip and audio track. In FM radio mode, press to adjust the tuning. Prog Press to program tracks to play in a specific order. OPEN POWER Stop Press to stop audio track. SOURCE Play/Pause/Pair Press to play or pause an audio track.
Connecting External Devices Pairing Bluetooth and Playing Audio Wirelessly 1. Set the Source to BT and press and hold the Play/Pause/Pair button. The pairing indicator will begin quickly flashing blue. When pairing, remain within 3 feet of the unit. 2. Using the controls on your Bluetooth device, search for and select IHCTB627 in your Bluetooth settings to pair. If your device requests a password, enter the default password 0 0 0 0 .
Operation Playing a Record It is recommended that you use extreme care when manipulating the tone arm, stylus, and other components of this turntable. These parts are very sensitive and can easily break or become damaged if they are carelessly handled. 1. Set the Source to Phono. 2. Lift open the turntable cover and place the record on the turntable. If you are playing a 45 rpm record, use the included 45 rpm adapter and place it between the turntable and the record. 3.
Loading and Playing a CD 1. Press the Open/Close button to open the CD tray. 2. Place a CD in the tray, label side facing up, and close the CD tray. 3. Set the Source to CD mode. 4. Use the controls on the unit to begin play, pause, stop and skip audio on the loaded disc. Programming a CD 1. Press the Stop button to stop a loaded CD. 2. Press the Prog button on the remote. “01” will blink on the display. 3. Press the Skip Fwd/Rev buttons to select a track. 4.
Customer Support Contact Information Website: www.iliveelectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iliveelectronics.