Jetlun Zigbee Occupy Sensor User Guide User Guide rev 1.
Jetlun Corporation 2 Jetlun Occupancy Sensor User Guide rev 0.1 DRAFT © 2009 Jetlun Corporation. All rights reserved. Notice: No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or stored in a database or retrieval system for any purpose without the express written permission of Jetlun Corporation.
Jetlun Corporation 3 Jetlun Occupancy Sensor User Guide rev 0.1 DRAFT Table of Contents 1.0 ABOUT THIS GUIDE .......................................................................................................... 4 1.1 BECOMING FAMILIAR WITH THIS USER GUIDE ...................................................................... 4 1.1 Quick Reference ........................................................................................................... 4 1.2 Icon Descriptions .........................
Jetlun Corporation 4 Jetlun Occupancy Sensor User Guide rev 0.1 DRAFT 1.0 ABOUT THIS GUIDE 1.1 Becoming familiar with this User Guide 1.1 Quick Reference The Jetlun Occupancy Sensor (RD77760) User Guide describes the following: Table 1: Where to find information in this User Guide Planning and Installing the Jetlun Occupy Sensor 1.2 Chapter 2 and 3 Icon Descriptions While reading through the User Guide, you may see various icons that call attention to specific items.
Jetlun Corporation 5 Jetlun Occupancy Sensor User Guide rev 0.1 DRAFT 2.0 PRODUCT OVERVIEW Thank you for choosing the Occupancy Sensor (RD77760). The Occupancy Sensor is designed to communicate with JIM Gateway via Radio Frequency (RF) to provide remote control of your zigbee-enalbe device such as appliance module. The Occupancy Sensor is a Zigbee® enable device. In the Zigbee® network, the Occupy Sensor is designed to act as enddevice.
Jetlun Corporation 6 Jetlun Occupancy Sensor User Guide rev 0.1 DRAFT Figure 1: Front Panel of the Occupy Sensor The Power LED lights up RED when the battery volume is low. The Detect LED lights up Green when some one stands in front of sensor. The Zigbee ACT LED blinks green when Occupancy senseor receives/sends the data. The Zigbee ACT LED is solid green for 300 seconds when Occupancy sensor joins the zigbee network. 2.
Jetlun Corporation 7 Jetlun Occupancy Sensor User Guide rev 0.1 DRAFT Table 3: Back Panel of the Occupancy Sensor Description The Zigbee Network button is applied for the Occupancy Sensor to join or leave the network. Press the Zigbee Network button once to join the network if the sensor is not in the network. To remove the sensor from the network, press the Zigbee Network button once to leave the network. 2.
Jetlun Corporation 8 Jetlun Occupancy Sensor User Guide rev 0.1 DRAFT 3.0 INSTALLING THE JETLUN OCCUPY SENSOR Follow these quick steps to install your Jetlun Zigbee Occupy Sensor. 3.1 Install the Occupy Sensor 3.1.1 Join the Network  STEP 1: Press the Zigbee network button for 3-5 seconds and release the button. The Zigbee Act LED is blinking.  STEP 2: The Occupancy Sensor will join the network within 1 minute. The Zigbee ACT LED should be solid green for 300 seconds.
Jetlun Corporation 9 Jetlun Occupancy Sensor User Guide rev 0.1 DRAFT  STEP 3: Use the new battery instead the old one  STEP 4: Close the bottom panel and screw the screw. 3 Q: Join the Occupancy sensor to the Gateway Zigbee network through RD75613? A: The procedure is following:  STEP 1: Form the Zigbee Network through the RD75613. 1. Enter the Gateway utility web Home Area Network > Control interface 2.
Jetlun Corporation 10 Jetlun Occupancy Sensor User Guide rev 0.1 DRAFT Â STEP 3: Occupancy sensor leaves the network 1. Press and hold the Zigbee network button for 3-5 seconds. 2. The Occupancy Sensor has left the network successfully when the ACT LED is off. 4.
Glossary Zigbee is a low-speed, low powered 802.15.4 wireless mesh standard established by the Zigbee Alliance. The Zigbee Alliance is a non-profit Standard organization made up 300+ companies driving development of ZigBee wireless technology. For more information, visit www.zigbee.org. Zigbee is the only wirleess technology standard that has been listed under NIST as 1 of the 13 Smart Grid interoperability standards. For more information about NIST, please visit www.nist.gov. ......
Notes
Jetlun Corporation 88 Parkgrove Drive So San Francisco CA 94080 USA www.jetlun.com sales@jetlun.