Jetlun ZigBee GreenPHY Appliance Module Plus User Guide (RD71316) User Guide Draft 88 PARKGROVE DRIVE | SO SAN FRANCISCO | CA | 94080 | USA T: +1 866 498 2703 | F: +1 650 360 1977
Jetlun Corporation 2 Jetlun ZigBee Appliance Plus User Guide Draft © 2012 Jetlun Corporation. All rights reserved. Notice: No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or stored in a database or retrieval system for any purpose without the express written permission of Jetlun Corporation.
Jetlun Corporation 3 Jetlun ZigBee Appliance Plus User Guide Draft Table of Contents 1.0 ABOUT THIS GUIDE .......................................................................................................... 4 1.1 BECOMING FAMILIAR WITH THIS USER GUIDE ...................................................................... 4 1.1 Quick Reference........................................................................................................... 4 1.2 Icon Descriptions .............................
Jetlun Corporation 4 Jetlun ZigBee Appliance Plus User Guide Draft 1.0 ABOUT THIS GUIDE 1.1 Becoming familiar with this User Guide 1.1 Quick Reference The Jetlun ZigBee GreenPHY Appliance Module Plus (RD71316) User Guide describes the following: Table 1: Where to find information in this User Guide Installing and Configuring the Appliance Plus Restoring the ZigBee GreenPHY Appliance Module Plus to Factory Default EMI Information Technical Specification 1.
Jetlun Corporation 5 Jetlun ZigBee Appliance Plus User Guide Draft We welcome your feedback on Jetlun Gateway documentation. This includes feedback on the structure, content, accuracy, or completeness of our documents, and any other comments you may have. Please send your comments to docs@jetlun.com.
Jetlun Corporation 6 Jetlun ZigBee Appliance Plus User Guide Draft 2.0 PRODUCT OVERVIEW Thank you for choosing the ZigBee GreenPHY Appliance Module Plus (RD71316). The ZigBee GreenPHY Appliance Module Plus is a 30A ZigBee-enabled two-relay Load Control Switch (LCS) that also monitors the energy usage of the appliances that are connected.
Jetlun Corporation 7 Jetlun ZigBee Appliance Plus User Guide Draft 2.
Jetlun Corporation 8 Jetlun ZigBee Appliance Plus User Guide Draft Demand Response Level • • • • • • • • • • Off Solid Green Slow Blinking Green Fast Blinking Green Solid Orange Slow Blinking Orange Fast Blinking Orange Solid Red Slow Blinking Red Fast Blinking Red • • • • • • • • • • scheduled event No event in process Level#1 Level#2 Level#3 Level#4 Level#5 Level#6 Level#7 Level#8 Level#9 Table 4: Front Panel Button Description Icon Button DR button Description Press the button once and its chang
Jetlun Corporation 9 Jetlun ZigBee Appliance Plus User Guide Draft 3.0 INSTALLING THE JETLUN APPLIANCE PLUS 3.1 Installing the ZigBee GreenPHY Appliance Module Plus Hardware Follow these quick steps to install your ZigBee GreenPHY Appliance Module Plus NOTE: There are two devices DUT1 and DUT2 connecting to ZigBee GreenPHY Appliance Module Plus.
Jetlun Corporation 10 Jetlun ZigBee Appliance Plus User Guide Draft  STEP 2:  STEP 3: When the ZigBee GreenPHY Appliance plus joined the ZigBee network, the Power/ZigBee LED is solid green. When the ZigBee GreenPHY Appliance plus joined the PLC network, the HomePluGP LED is solid green. Figure 2: Power/ZigBee LED Figure 4:HomePlugGP LED 3.2.2 Leaving the network  STEP 1:  STEP 2: Press and hold the factory default button for 8 seconds and release the button.
Jetlun Corporation 11 Jetlun ZigBee Appliance Plus User Guide Draft The ZigBee GreenPHY Appliance Module Plus is always opt-in of demand response by default. If you want to opt-out of the received or executing the DRLC events, simply press the DR Button once.
Jetlun Corporation 12 Jetlun ZigBee Appliance Plus User Guide Draft 4.0 RESTORING FACTORY DEFAULT To restore factory default, press and hold the factory default button for 30 seconds. The Power/ZigBee LED will start blinking green very quickly to signify the factory default is in process.
Jetlun Corporation 13 Jetlun ZigBee Appliance Plus User Guide Draft 5.0 FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Jetlun Corporation 14 Jetlun ZigBee Appliance Plus User Guide Draft 6.0 TECHNICAL SPECIFICATIONS Part Number Product Name Standard Compliance Frequency Band Transport Mode Range ZigBee Antenna Security LEDs Accuracy Resolution Operating Temp Operating Humidity Storage Temp Storage Humidity Operating Voltage Consumption Safety and EMI WEEE RD71316 Jetlun ZigBee GreenPHY Appliance Module Plus ZigBeePro Smart Energy 1.1 or Home Automation 1.0 2.
Notes
Jetlun Corporation 88 Parkgrove Drive So San Francisco CA 94080 USA www.jetlun.com sales@jetlun.com support.jetlun.