Use and Care Manual
Model RCB-25, 5/8-inch Rebar Cutter/Bender
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE RISK OF INJURY:
• Read and understand all warnings posted on the tool. Failure to comply with all of these warnings may
cause serious injury.
• This tool is designed and intended for the cutting of rebar. Use for any other purpose may void warranty.
• Always wear ANSI Z87.1 approved safety glasses or face shield while using this tool.
• Keep hands and feet clear of the cutting area. Keep bystanders away.
• Cut pieces of rebar may exit the tool at high velocity, causing injury – use appropriate precautions.
Operation:
JET
427 New Sanford Road
LaVergne, Tennessee 37086 Part No. M-220025
Ph.: 800-274-6848 Edition 1 12/2015
www.jettools.com Copyright © 2015 JET, a Division of JPW Industries, Inc.